GitHub - kaminet/Teacup_Firmware: Teacup FiveD Firmware for RepRap and other 3D printers

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 995 Commits
attic		attic
extruder		extruder
research		research
simulator		simulator
testcases		testcases
tools		tools
.gitignore		.gitignore
Doxyfile		Doxyfile
LICENSE		LICENSE
Makefile-AVR		Makefile-AVR
Makefile-SIM		Makefile-SIM
Makefile-common		Makefile-common
Makefile-example		Makefile-example
README		README
README.sim		README.sim
Teacup_Firmware.pde		Teacup_Firmware.pde
ThermistorTable.double.h		ThermistorTable.double.h
ThermistorTable.single.h		ThermistorTable.single.h
analog.c		analog.c
analog.h		analog.h
arduino.h		arduino.h
arduino_1280.h		arduino_1280.h
arduino_168_328p.h		arduino_168_328p.h
arduino_32U4.h		arduino_32U4.h
arduino_644.h		arduino_644.h
arduino_usb1286.h		arduino_usb1286.h
arduino_usb1287.h		arduino_usb1287.h
calc.pl		calc.pl
clock.c		clock.c
clock.h		clock.h
config.3drag.h		config.3drag.h
config.default.h		config.default.h
config.gen3.h		config.gen3.h
config.gen6.h		config.gen6.h
config.gen7-v1.1-v1.3.h		config.gen7-v1.1-v1.3.h
config.gen7-v1.4.h		config.gen7-v1.4.h
config.ramps-v1.2.h		config.ramps-v1.2.h
config.ramps-v1.3.h		config.ramps-v1.3.h
config.rumba.h		config.rumba.h
config.sanguinololu-v1.1.h		config.sanguinololu-v1.1.h
config.sanguinololu-v1.2.h		config.sanguinololu-v1.2.h
config.sanguish.h		config.sanguish.h
config.teensy.h		config.teensy.h
config.teensypp.h		config.teensypp.h
config_wrapper.h		config_wrapper.h
copier.c		copier.c
copier.h		copier.h
crc.c		crc.c
crc.h		crc.h
createTemperatureLookup.py		createTemperatureLookup.py
dda.c		dda.c
dda.h		dda.h
dda_kinematics.c		dda_kinematics.c
dda_kinematics.h		dda_kinematics.h
dda_lookahead.c		dda_lookahead.c
dda_lookahead.h		dda_lookahead.h
dda_maths.c		dda_maths.c
dda_maths.h		dda_maths.h
dda_queue.c		dda_queue.c
dda_queue.h		dda_queue.h
debug.c		debug.c
debug.h		debug.h
delay.c		delay.c
delay.h		delay.h
extract.py		extract.py
func.sh		func.sh
fuses.h		fuses.h
gcode_parse.c		gcode_parse.c
gcode_parse.h		gcode_parse.h
gcode_process.c		gcode_process.c
gcode_process.h		gcode_process.h
graycode.c		graycode.c
heater.c		heater.c
heater.h		heater.h
home.c		home.c
home.h		home.h
intercom.c		intercom.c
intercom.h		intercom.h
memory_barrier.h		memory_barrier.h
mendel.c		mendel.c
mendel_cmd		mendel_cmd
pinio.c		pinio.c
pinio.h		pinio.h
preprocessor_math.h		preprocessor_math.h
sd.c		sd.c
sender-mac.sh		sender-mac.sh
sender.sh		sender.sh
serial.c		serial.c
serial.h		serial.h
sermsg.c		sermsg.c
sermsg.h		sermsg.h
sersendf.c		sersendf.c
sersendf.h		sersendf.h
simulator.h		simulator.h
temp.c		temp.c
temp.h		temp.h
timer.c		timer.c
timer.h		timer.h
usb_serial.c		usb_serial.c
usb_serial.h		usb_serial.h

Repository files navigation

##############################################################################
#                                                                            #
# Teacup - lean and efficient firmware for RepRap printers                   #
#                                                                            #
# by Triffid Hunter, Traumflug, jakepoz, Markus Hitter, many others          #
#                                                                            #
##############################################################################

For installation instructions, see
http://reprap.org/wiki/Teacup_Firmware#Simple_Installation and/or
http://reprap.org/wiki/Teacup_Firmware#Developer_Installation

For documentation, see
http://reprap.org/wiki/Teacup_Firmware


##############################################################################
#                                                                            #
# This firmware is Copyright (c) ...                                         #
#   2009 - 2010 Michael Moon aka Triffid_Hunter                              #
#   2010 - 2013 Markus "Traumflug" Hitter <[email protected]>                  #
#                                                                            #
# This program is free software; you can redistribute it and/or modify       #
# it under the terms of the GNU General Public License as published by       #
# the Free Software Foundation; either version 2 of the License, or          #
# (at your option) any later version.                                        #
#                                                                            #
# This program is distributed in the hope that it will be useful,            #
# but WITHOUT ANY WARRANTY; without even the implied warranty of             #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              #
# GNU General Public License for more details.                               #
#                                                                            #
# You should have received a copy of the GNU General Public License          #
# along with this program; if not, write to the Free Software                #
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA #
#                                                                            #
##############################################################################