Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
-
Updated
Nov 25, 2024 - C++
Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
WebSockets for microcontrollers
This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behavin…
Sensirion SPS30 driver for ESP32, SODAQ, MEGA2560, UNO,UNO-R4 ESP8266, Particle-photon on UART OR I2C coummunication
Arduino library for PM sensors with serial interface
Enables WiFiNINA network connection (local and Internet) for SAM DUE, SAMD21, SAMD51, Teensy, AVR Mega, STM32, RP2040-based boards, etc. in addition to Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000, Arduino UNO WiFi Rev.2 , Nano 33 IoT, Nano_RP2040_Connect. Now with fix of severe limitation to permit sending much larger data than total 4K
mDNS Library for nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, AVR Mega, RP2040-based boards, etc. using Ethernet W5x00. Supports mDNS (Registering Services) and DNS-SD (Service Discovery). Ethernet_Generic library is used as default for W5x00
WizFi360/ESP8266/ESP32 wrapper library for Arduino providing an easy-to-use way to manipulate ESP8266/ESP32-AT shields.
This library enables you to use Hardware-based PWM channels on AVR-based boards, such as Nano, UNO, Mega, Leonardo, 32u4, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Building self-balancing robot using LQR controller
An Arduino Port Expander for ESPHome with added Arduino Mega 2560 support
Library to configure WiFi/Credentials at runtime for Teensy, SAM DUE, STM32F/L/H/G/WB/MP1, SAMD21/SAMD51, RP2040-based boards, etc. using WizFi360 /ESP8266 /ESP32-AT-command shields. You can also specify static AP and STA IP.
A simple library that implements an automatic DDNS Update Client for SAM DUE, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, RP2040-based RASPBERRY_PI_PICO, Portenta_H7, etc. besides ESP8266/ESP32, using ESP8266-AT/ESP32-AT WiFi, WiFiNINA, Ethernet W5x00, ENC28J60 or LAN8742A. It is designed to be light-weight and currently supports DuckDNS, No-ip, …
Source code for controlling a 28-stepper motor 7-segment display with a single Arduino Mega2560
My Home Automation using Home Assistant and DIY IoT devices
This library allows Arduino/Genuino Mega boards to control up to 9 servos with the integrated 16-bit hardware PWM timer/counter.
Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43…
Add a description, image, and links to the mega2560 topic page so that developers can more easily learn about it.
To associate your repository with the mega2560 topic, visit your repo's landing page and select "manage topics."