mcuboot supports the stm32 external octo-flash in XiP

[FRASTM]

Prepare the boot/zephyr/flash_map_extended.c to support the stm32 MemoryMapped mode where the application is XiP from a external octo/quad flash memory
This is done by setting the CONFIG_STM32_MEMMAP flag which configures the octo/quad flash stm32 driver in MemoryMapped mode.

The MCUBOOT is required to validate the image which is supposed to be in the external flash memory. With

	chosen {
		zephyr,flash = &flash0;
		zephyr,code-partition = &boot_partition;
	};

The mcuboot is built, linked and stored for the stm32 internal flash. The stm32 internal flash must declare the

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 DT_SIZE_K(64)>;
		};

Image slot 0 is located in the external NOR flash to be executed in XiP.

[FRASTM]

Requires the ../zephyr/drivers/flash/flash_stm32_ospi.c to support the XiP as in zephyrproject-rtos/zephyr#61082

$ west build -p always -b b_u585_iot02a -d build_mcuboot ../bootloader/mcuboot/boot/zephyr
$ west flash -d build_mcuboot
--> flash the build_mcuboot/zephyr/zephyr.bin at address 0x8000000

*** Booting Zephyr OS build zephyr-v3.5.0-5257-g667a0df780a5 ***
I: Starting Direct-XIP bootloader
I: Primary   slot: version=0.0.0+0
I: Secondary slot: version=0.0.0+0
I: Image 0 loaded from the primary slot
I: Bootloader chainload address offset: 0x0
I: Jumping to the image slot
*** Booting Zephyr OS build zephyr-v3.5.0-5257-g667a0df780a5 ***
Hello World from XIP! b_u585i_iot02a

assuming there is a valid image at Primary slot in the external NOR flash. AT least one valid image is required in the external NOR flash.

[FRASTM]

when building the mcu boot there is no slot for image (no image, only a mcuboot) flashing at boot_partition of the flash0
The way to build the mcuboot for stm32 internal flash @ 0x8000000 is with. This is also possible with stm32h750b_dk which has a DUAL quad-spi flash @0x90000000

chosen {
	zephyr,flash = &flash0;
	zephyr,code-partition = &boot_partition;
};

and

$ west build -p always -b stm32h750b_dk -d build_mcuboot ../bootloader/mcuboot/boot/zephyr

`$ west flash -d build_mcuboot`
*** Booting Zephyr OS build zephyr-v3.5.0-5257-g667a0df780a5 ***
I: Starting Direct-XIP bootloader
I: Primary   slot: version=0.0.0+0
I: Secondary slot: version=0.0.0+0
I: Image 0 loaded from the primary slot
I: Bootloader chainload address offset: 0x0
I: Jumping to the image slot
*** Booting Zephyr OS build zephyr-v3.5.0-5257-g667a0df780a5 ***
Hello World from XIP! stm32h750b_dk

[github-actions]

This pull request has been marked as stale because it has been open (more than) 60 days with no activity. Remove the stale label or add a comment saying that you would like to have the label removed otherwise this pull request will automatically be closed in 14 days. Note, that you can always re-open a closed pull request at any time.