Home
Please consider donating to the cause.
For quick questions jump on Gitter and ask away.
This is an Arduino Library that has deep support for Real Time Clock modules.
Please see the FAQ for common questions and answers.
Full support including squarewave output pin and memory access
Full support including squarewave output pin and alarms.
There are several examples that will help you get started. They range from simple to complex and are always a good reference.
The RTC devices expose two digital wires labeled SDA and SCL. These need to be connected to the wires exposed by your Arduino board labeled the same way. This varies from board to board so you will need to consult the Arduino reference documents for which pins are the SDA and SCL.
For ESP8266, these default to SDA = GPIO04 (D2) and SCL = GPIO05 (D1); but check with your specific board.
The RTC devices also require power. Make sure that VCC is connected to the proper voltage that your device requires. DS1307 requires 5v while the DS3231 can use either 3.3v or 5v. The GND must be connected to the Arduino GND even if you are not powering the RTC from the Arduino voltage pins.
This object will be used to get and set the date and time. It supports being constructed with various time formats from strings to standard Epoch time formats. It also supports access to individual date and time value for year, month, day, hour, minute, and seconds.
This object will be used to get the temperature from the RTC module if it supports it.
This object will expose the features of the DS1307 RTC chip including access to the onboard memory.
This object will expose the features of the DS3231 RTC chip including access to the two alarm features.