MiniCore v3.0.3

Changelog:

• Update to Urboot v8.0 bootloaders
• Prepare for Avrdude v8.0 boards manager support

MiniCore v3.0.2

Changelog:

• Add 9.216 MHz clock option
• Fix ATmega168 and ATmega88 fuse issue

MiniCore v3.0.1

Changelog:

• Add upload bootloader speed menu option
  • Urboot has automatic baud rate detection, so the upload baud rate can be changed without flashing a new bootloader binary. The Default baud rate option should always work for the selected clock speed. However, faster or slower baud rates may be used if the baud rate error is within about ±2.5%. Use a baud rate calculator to check whenever a clock speed supports a particular baud rate.

MiniCore v3.0.0

Changelog:

• Replace Optiboot with Urboot
• Add bootloader support to ATmega48/A/PA/PA/PB
• Replace Optiboot flash library with one that supports Urboot
• Enable LTO by default
• Add -fpermissive GCC build flag but better compatibility
• Add support for EEPROM uploads directly from the sketch using Urboot or an ISP programmer
  • See README for more information
• Add 6 MHz external oscillator option
• Update toolchain to use Avrdude 7.2

MiniCore v2.2.2

Changelog:

• Fix issue where the AVRISPmkII couldn't be used

MiniCore v2.2.1

Changelog:

• Updates to MCUdude corefiles (Updates currently present in ArduinoCore-avr or certain PRs waiting to be merged)
  • Use ADC instead of combining ADCL and ADCH
  • Improve wiring_shift function
  • Remove unnecessary if branch (because length is checked in while statement below the if-clause)
  • Add bitToggle macro
  • Add parenthesis around 'bitvalue' allowing correct macro expansion
  • Add null pointer check to String destructor
  • Improvements to HardwareSerial.cpp
  • Improve how TXCn bit is cleared in USCRnA register
  • Update abi and new
  • ISO c++ doesn't support binary contants

MiniCore v2.2.0

Changelog:

• Fix the TwoWire destructor to use the array delete operator (ATmega328PB)
• Speed up 'available' function by inserting uint16_t (see arduino/ArduinoCore-avr#433 for details)
• Prevent corruption of disassembler listing command for paths w/ spaces (#235)
• Replace typeof macros like min, max, sq with template-based functions instead
  • Will fall back to the "classic" macros if in a non-c++ environment
• Fix incorrect TWBR register in twi1.c (#244)
• Add Wire timeout
  • Enable Wire timeout by adding -DWIRE_TIMEOUT as a compiler flag, or by uncommenting a line in Wire_timeout.h
• Remove unnecessarytwi_masterBuffer from twi.c (#245)
• Add Xplained Mini as a valid programmer
• Use "correct" lock/unlock byte values in boards.txt
  • Previously Avrdude tried to write 0's to reserved bits that's supposed to be 1's
• Prepare for Avrdude 7.1
  • avrdude.conf updated to fully utilize the features and improvements Avrdude 7.1 brings over the current Avrdude 6.3

MiniCore v2.0.0

Changelog:

• Add ATmega48PB, 88PB, 168PB and 328PB support
• Add separate bootloader menu
  • You'll save 512 bytes by not using a bootloader
• Update core files to the latest version

MiniCore v2.1.3

Changelog:

• Add support for C++17
• Add WIRE_INTERFACES_COUNTmacro. Relevant for devices with more than one TWI interface
• Add macros to determine which core is in use
  • Look for MINICORE or MCUDUDE_MINICOREif using this core

MiniCore v2.1.2

Changelog:

• Fix typo in Wire1.h library (#182)
• Fix missing SERIAL_PORT* macros in pins_arduino.h
• Update optiboot.h library
  • It's now more streamlined than before
• Add flash library as a high-level wrapper around the optiboot.h library