BrewBench is an Arduino brew monitor, controller and alert system for the homebrewers and pro brewers. It uses the Arduino REST API to interface with temp sensors.
You can also connect a relay to the digital ports and add a heater / pump to create a RIMS system. The software will start/stop the heater/pump based on the target temperature you set.
BrewBench Monitor can easily be used on fermenters with a thermowell.
| Sensor | Thermistors | Temperature |
| Sensor | DS18B20 | Temperature |
| Sensor | PT100 | Temperature |
| Sensor | DHT11 | Temperature / Humidity |
| Sensor | DHT12 | Temperature / Humidity |
| Sensor | DHT22 | Temperature / Humidity |
| Sensor | BMP280 | Temperature / Pressure |
| Sensor | SEN-13322 | Moisture |
| Controller | Ranco | Temperature |
| Controller | InkBird ITC-1000 | Temperature |
| Board | ESP32 | Monitor or App |
| Board | ESP8266 | Monitor |
| Board | Yun Rev 2 | Monitor |
Download a sketch from the sketches link in the header and install with the Arduino IDE.
Go to BrewBench monitor or clone this repo and follow dev instructions below.
Install NodeJS
# install
npm install
# run tests
npm test
# start dev web server
npm startCode is compiled to a build directory, build the code and copy that to your web server.
# install
npm install
# build files for deployment
npm run build
Download the Fritzing Diagram here
Download the Fritzing Diagram here
- For the Lovibond Hex colors: http://brookstonbeerbulletin.com/thinking-about-beer-color
- For the SVG icons:
- For the Hop and Grain reference: https://byo.com
- For the recipes: http://beersmithrecipes.com
- For the bell sounds: http://www.orangefreesounds.com/category/sound-effects/bell-sound
BrewBench is a brew monitor and controller Developed by Andrew Van Tassel ©2020.
For help look at the forum or start a conversation on gitter.
Made with 
from Colorado