Note: For OSX users, this line needs to be changed to libusb-1.0 TODO: determine OS at runtime or handle fallback
The CLI tool supports DFU flashing for nuttx.bin and nuttx_user.bin. When the application is run with -d, it looks for nuttx.bin and nuttx_user.bin in the application directory and if not found, it will abort. Optionally, paths for the files can be specific with --osFile and --userFile.
The CLI tool also supports device and file management including file transfers, flash partitioning, and MCU reset.
To run MeadowCLI on Windows, run meadow.exe from the command prompt. On Mac and Windows, call mono meadow.exe.
To see the options, run the application with the --help arg.
File and device commands require you to specify the serial port (-s or --SerialPort). You can determine the serial port name in Windows by viewing the Device Manager. The CLI will remember the last Serial Port used, so you only need to specify it if you need to change the value.
On Mac and Linux, the serial port will show up in the /dev folder, generally with the prefix tty.usb. You can likely find the serial port name by running the command ls /dev/tty.usb.
Appending -v or -vv to any command will increase the logging verbosity to Debug and Trace respectively. Trace should only be necessary when debugging issues with the CLI.
meadow v0.13.0
USAGE
meadow [options]
meadow [command] [...]
OPTIONS
-h|--help Shows help text.
--version Shows version information.
COMMANDS
debug Debug a Meadow Application
download os Downloads the latest Meadow.OS to the host PC.
install dfu-util Install the DfuUtil utility
listen Listen for console output from Meadow
trace disable Disable Trace Logging on the Meadow
trace enable Enable trace logging on the Meadow
trace level Enable trace logging on the Meadow
flash erase Erase the flash on the Meadow Board
flash verify Verify the contents of the flash were deleted.
qspi write Write a QSPI value to the Meadow
qspi read Read a QSPI value from the Meadow
qspi write Write a QSPI value to the Meadow
nsh disable Disables NSH on the Meadow device.
nsh enable Enables NSH on the Meadow device.
mono disable Sets mono to NOT run on the Meadow board then resets it.
mono enable Sets mono to run on the Meadow board and then resets it.
mono flash Uploads the mono runtime file to the Meadow device. Does NOT move it into place.
mono state Returns whether or not mono is enabled or disabled on the Meadow device.
mono update rt Uploads the mono runtime files to the Meadow device and moves them into place.
file delete Delete files from the Meadow File System
file initial Get the initial bytes from a file
file list List files in the on-board filesystem
file write Write files to the Meadow File System
fs format Format a File System on the Meadow Board
fs renew Create a File System on the Meadow Board
esp32 restart Restart the ESP32
esp32 file write Write files to the ESP File System
flash esp Flash the ESP co-processor
flash os Update the OS on the Meadow Board
device info Get the device info
device mac Read the ESP32's MAC address
device name Get the name of the Meadow
cloud login Log into the Meadow Service
cloud logout Logout of the Meadow Service
app deploy Deploy the specified app to the Meadow
You can run `meadow [command] --help` to show help on a specific command.
Specifying --help with no command will output the list of available commands. Specifying --help with a command (eg: meadow file delete --help) will output command specific help.
meadow v0.13.0
USAGE
meadow file delete --files <values...> [options]
DESCRIPTION
Delete files from the Meadow File System
OPTIONS
* -f|--files The file(s) to delete from the Meadow Files System
-v Log verbosity
-s|--port Meadow COM port Default: "COM19".
-h|--help Shows help text.
meadow flash os
meadow listen
You can set the debug trace level to values 0, 1, 2, or 3. 2 is the most useful.
meadow trace enable --level 2
meadow files write -f [NameOfFile]
You may specify multiple instances of -f to send multiple files
meadow files list
meadow files delete -f [NameOfFile]
You may specify multiple instances of -f to send multiple files
meadow mono disable
meadow mono enable
meadow device info
meadow device name
NOTE THIS IS NOT YET FULLY IMPLEMENTED, IT WILL NOT WORK
meadow debug -p XXXX
This starts listening on the specified port for a debugger to attach
Note: you can use SDB command line debugger from https://github.com/mono/sdb. Just build it according to its readme, run the above command and then:
sdb "connect 127.0.0.1 XXXX"
Substitute XXXX for the same port number as above
You'll typically need at least 5 files installed to the Meadow flash to run a Meadow app:
- System.dll
- System.Core.dll
- mscorlib.dll
- Meadow.Core.dll
- App.exe (your app)
It's a good idea to disable mono first, copy the files, and then enable mono
This code is ugly. We know. :) Lots of different coding styles, spanning many decades and sensibilities.
Copyright Wilderness Labs Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.