Skip to content

Latest commit

 

History

History
132 lines (99 loc) · 5.92 KB

getting_started_python3.md

File metadata and controls

132 lines (99 loc) · 5.92 KB
Raw

Getting Started

In this tutorial we'll be:

  1. installing UniK
  2. writing a simple HTTP Daemon in Python
  3. compiling to a unikernel and launching an instance on Virtualbox

Installing UniK

Prerequisites

Ensure that each of the following are installed

Install, configure, and launch UniK

  1. Install UniK
$ git clone https://github.com/solo-io/unik.git
$ cd unik
$ make

note: make will take quite a few minutes the first time it runs. the UniK Makefile is pulling all of the Docker images that bundle UniK's dependencies.

Then, place the unik executable in your $PATH to make running UniK commands easier:

$ mv _build/unik /usr/local/bin/
  1. Configure a Host-Only Network on Virtualbox
  • Open Virtualbox
  • Open Preferences > Network > Host-only Networks
  • Click the green add button on the right side of the UI
  • Record the name of the new Host-Only adapter. You will need this in your UniK configuration
  • Ensure that the Virtualbox DHCP Server is Enabled for this Host-Only Network:
    • With the Host-Only Network selected, Click the edit button (screwdriver image)
    • In the Adapter tab, note the IPv4 address and netmask of the adapter.
    • In the DHCP Server tab, check the Enable Server box
    • Set Server Address an IP on the same subnet as the Adapter IP. For example, if the adapter IP is 192.168.100.1, make set the DHCP server IP as 192.168.100.X, where X is a number between 2-254.
    • Set Server Mask to the netmask you just noted
    • Set Upper / Lower Address Bound to a range of IPs on the same subnet. We recommend using the range X-254 where X is one higher than the IP you used for the DHCP server itself. E.g., if your DHCP server is 192.168.100.2, you can set the lower and upper bounds to 192.168.100.3 and 192.168.100.254, respectively.
  1. Configure UniK daemon
  • Using a text editor, create and save the following to $HOME/.unik/daemon-config.yaml:
providers:
  virtualbox:
    - name: my-vbox
      adapter_type: host_only
      adapter_name: NEW_HOST_ONLY_ADAPTER

replacing NEW_HOST_ONLY_ADAPTER with the name of the network adapter you created.

  1. Launch UniK and automatically deploy the Virtualbox Instance Listener
  • Open a new terminal window/tab. This terminal will be where we leave the UniK daemon running.
  • cd to the _build directory created by make
  • run ./unik daemon --debug (the --debug flag is optional, if you want to see more verbose output)
  • UniK will compile and deploy its own 30 MB unikernel. This unikernel is the Unik Instance Listener. The instance listener uses udp broadcast to detect instance ips and bootstrap instances running on Virtualbox.
  • After this is finished, UniK is running and ready to accept commands.
  • Open a new terminal window and type unik target --host localhost to set the CLI target to the your local machine.

Write a Python HTTP server

  1. Open a new terminal window, but leave the window with the daemon running. This window will be used for running UniK CLI commands.

  2. Make sure python3.5 and pip are installed:

  1. Create a file server.py using a text editor. Copy and paste the following code in that file:
import http.server
import socketserver

PORT = 8080

Handler = http.server.SimpleHTTPRequestHandler

httpd = socketserver.TCPServer(("", PORT), Handler)

print("serving at port", PORT)
httpd.serve_forever()

This will be our simple Python server.

Note: dependencies in Python applications must be installed with pip to the project directory (rather than the global site-packages for the current user). See rump-python3 for more information.

  1. Try running this code with python3 server.py. Visit http://localhost:8080/ to see that the server is running.

  2. We need to create a manifest file to tell UniK the name of the file which contains the entrypoint to our application. In this case, it's just server.py.

  • Create a file named manifest.yaml and paste the following inside:
main_file: server.py
  1. Great! Now we're ready to compile this code to a unikernel.

Compile an image and run on Virtualbox

  1. run the following command from the directory where your server.py is located:
unik build --name myImage --path ./ --base rump --language python --provider virtualbox

this command will instruct UniK to compile the sources found in the working directory (./) using the rump-python-virtualbox compiler.

  1. You can watch the output of the build command in the terminal window running the daemon.

  2. When build finishes, the resulting disk image will reside at $HOME/.unik/virtualbox/images/myImage/boot.vmdk

  3. Run an instance of this image with

unik run --instanceName myInstance --imageName myImage

  1. When the instance finishes launching, let's check its IP and see that it is running our application.

  2. Run unik instances. The instance IP Address should be listed.

  3. Direct your browser to http://instance-ip:8080 and see that your instance is running!

  4. To clean up your image and the instance you created

unik rmi --force --image myImage