sdkconfig.defaults

#
# Some useful defaults for the demo app configuration.
#

# Enable BLE
CONFIG_BT_ENABLED=y
CONFIG_GATTS_ENABLE=y
CONFIG_GATTC_ENABLE=
CONFIG_BLE_SMP_ENABLE=
CONFIG_BT_ACL_CONNECTIONS=2

# Use a custom partition table
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET=0x10000
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
CONFIG_APP_OFFSET=0x10000

# Bump the stack size of the Weave task to accommodate extra stack useage due to
# debugging.
CONFIG_WEAVE_TASK_STACK_SIZE=5120

# Default to 921600 baud when flashing and monitoring device
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_BAUD=921600
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_MONITOR_BAUD_115200B=y
CONFIG_MONITOR_BAUD=115200

# Enable various features that make it easier to debug secure Weave communication.
# WARNING: This option SHOULD NEVER BE ENABLED IN PRODUCTION BUILDS.
CONFIG_SECURITY_TEST_MODE=y

# Disable authentication checks for various device provisioning operations.
# WARNING: This option SHOULD NEVER BE ENABLED IN PRODUCTION BUILDS.
CONFIG_DISABLE_PROVISIONING_AUTH=y

# Print debug information related to certificate validation.
CONFIG_DEBUG_CERT_VALIDATION=y

# Log the device's provisioning hash at boot.
CONFIG_LOG_PROVISIONING_HASH=y

# Disable automatic closing of idle incoming connections.  This makes it possible
# to maintain an idle Weave Device Manager connection with the device for testing
# purposes.
CONFIG_DEFAULT_INCOMING_CONNECTION_IDLE_TIMEOUT=0