mesh bed leveling fails at probe point 48

[xx1180]

Did you test with a precompiled firmware?

Yes, and the problem still exists.

Bug Description

after upgrading to the latest version i have come across a problem and i don't know how to solve it
all was working fine before the update. i am running ender 3 s1, s1pro and s1plus and this problem is on all 3. when running the auto bed mesh the mesh fails at probe 49 on a 7x7 grid the probe retracts and homes then tries to restart the mesh probing. this problem has not happen if i do a 6x6 grid mesh. can you please help

Bug Timeline

new bug after updating to the latest version

Expected behavior

7x7 grid mesh probing

Actual behavior

fails at probing number 48 of 49 7x7 grid

Steps to Reproduce

No response

Version of Professional Firmware

version 2.1.3 F4 T13

Printer model

s1 F4 board

Electronics

No response

Add-ons

No response

Bed Leveling

ABL Bilinear mesh

Your Slicer

Cura

Host Software

Cura

Additional information & file uploads

No response

[classicrocker883]

i think it has to do more with your Mesh Inset. its probably failing because its a point it cannot reach. what is your Probe Offsets? and what are your Mesh Insets?

[mriscoc]

Maybe you have a CRTouch and forgot to disable HS mode.

[xx1180]

yes that was what was wrong turned off HS and it worked first time thanks

[classicrocker883]

yes that was what was wrong turned off HS and it worked first time thanks

I have a CRtouch and haven't experienced this with HS enabled. can that be explained more what HS has to do with CR touch?

[mriscoc]

I have a CRtouch and haven't experienced this with HS enabled. can that be explained more what HS has to do with CR touch?

https://github.com/mriscoc/Ender3V2S1/wiki/3D-BLTouch#notes-about-crtouch

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.