After restarting the printer mesh leveling settings are resetting.

[BurakFati]

In last 2 releases i have a issue about mesh leveling settings, it keeps resetting when i restart the printer. Is there a way to save it and restore it when a gcode called?

*only mesh points X and mesh points Y resetting

[mriscoc]

You must save the mesh settings with G29 Sn (Where n is the mesh slot number) or by using Advanced / Mesh Leveling / Save Bed Mesh

[BurakFati]

Thanks it helped me out for mesh points X and mesh points Y saving but mesh inset are still resetting to Maximize Area.

[mriscoc]

What is the name/version of the firmware that you are using?

[BurakFati]

It's Ender3V2-422-BLTUBL-MPC-20240125.bin currently.

[mriscoc]

Follow this process:
Set the mesh slot, density and inset, run a auto mesh leveling or reset the mesh, save the mesh data, save settings.
The next time the printer starts, all mesh settings and parameters will be automatically loaded.