Skip to content

Dev Device Declaration

Jump to bottom
moononournation edited this page Aug 20, 2023 · 29 revisions

Non-predefined board in Arduino IDE

Elecrow ESP Terminal with 3.5" parallel RGB display DLC35010R

#include <Arduino_GFX_Library.h>
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_ESP32PAR16(
    45 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, 48 /* RD */,
    47 /* D0 */, 21 /* D1 */, 14 /* D2 */, 13 /* D3 */, 12 /* D4 */, 11 /* D5 */, 10 /* D6 */, 9 /* D7 */,
    3 /* D8 */, 8 /* D9 */, 16 /* D10 */, 15 /* D11 */, 7 /* D12 */, 6 /* D13 */, 5 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9488(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */);

[DRAGON_RADAR]

#include <Arduino_GFX_Library.h>
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 39 /* CS */,
    48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
    11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 45 /* R3 */, 0 /* R4 */,
    8 /* G0 */, 19 /* G1 */, 20 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,
    4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */,
    1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
    1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));

ESP32-1732S019

#include <Arduino_GFX_Library.h>
#define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 10 /* CS */, 12 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);

[ESP32_2424012]

#include <Arduino_GFX_Library.h>
#define GFX_BL 8
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 10 /* CS */, 6 /* SCK */, 7 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);

ESP32-2432S028

#include <Arduino_GFX_Library.h>
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);

ESP32-3248S035

#include <Arduino_GFX_Library.h>
#define GFX_BL 27
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */, HSPI /* spi_num */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);

[ESP32-4827A043]

#include <Arduino_GFX_Library.h>
#define GFX_BL 2
Arduino_DataBus *bus = new Arduino_ESP32LCD16(
    48 /* DC */, 45 /* CS */, 47 /* WR */, 21 /* RD */,
    5 /* D0 */, 6 /* D1 */, 7 /* D2 */, 15 /* D3 */, 16 /* D4 */, 4 /* D5 */, 8 /* D6 */, 3 /* D7 */,
    46 /* D8 */, 9 /* D9 */, 1 /* D10 */, 42 /* D11 */, 39 /* D12 */, 41 /* D13 */, 40 /* D14 */, 14 /* D15 */);
Arduino_GFX *gfx = new Arduino_NV3041A(bus, 17 /* RST */, 0 /* rotation */, true /* IPS */);

ESP32-4827S043

#include <Arduino_GFX_Library.h>
#define GFX_BL 2
// option 1:
// Uncomment for ILI6485 LCD 480x272
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
    45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
    5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
    8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
    0 /* hsync_polarity */, 1 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
    0 /* vsync_polarity */, 3 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
    1 /* pclk_active_neg */, 9000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 272 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 2:
// Uncomment for ST7262 IPS LCD 800x480
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
//     45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
//     5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
//     8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
//     0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,
//     0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
//     1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 3:
// Uncomment for RPi DPI 1024x600
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
//     45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
//     5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
//     8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
//     0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
//     0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
//     1 /* pclk_active_neg */, 9000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);

ESP32-8048S070

#include <Arduino_GFX_Library.h>
#define GFX_BL 2
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    41 /* DE */, 40 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
    14 /* R0 */, 21 /* R1 */, 47 /* R2 */, 48 /* R3 */, 45 /* R4 */,
    9 /* G0 */, 46 /* G1 */, 3 /* G2 */, 8 /* G3 */, 16 /* G4 */, 1 /* G5 */,
    15 /* B0 */, 7 /* B1 */, 6 /* B2 */, 5 /* B3 */, 4 /* B4 */,
    0 /* hsync_polarity */, 180 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 16 /* hsync_back_porch */,
    0 /* vsync_polarity */, 12 /* vsync_front_porch */, 13 /* vsync_pulse_width */, 10 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);

ESP32 LCDKIT

LCDKIT can connect SPI or parallel 8-bit/16-bit display.

SPI

#include <Arduino_GFX_Library.h>
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 5 /* CS */, 22 /* SCK */, 21 /* MOSI */, 27 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, 18 /* RST */, 1 /* rotation */);

Parallel 8-bit low side

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);

Parallel 8-bit high side

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 25 /* D0 */, 26 /* D1 */, 12 /* D2 */, 13 /* D3 */, 14 /* D4 */, 15 /* D5 */, 2 /* D6 */, 4 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);

Parallel 16-bit

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP32PAR16(
    5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */,
    19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */,
    25 /* D8 */, 26 /* D9 */, 12 /* D10 */, 13 /* D11 */, 14 /* D12 */, 15 /* D13 */, 2 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);

ESP32-S3-EYE

#include <Arduino_GFX_Library.h>
#define GFX_BL 48
Arduino_DataBus *bus = new Arduino_ESP32SPI(43 /* DC */, 44 /* CS */, 21 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);

ESP32-S3-RGB

#include <Arduino_GFX_Library.h>
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 39 /* CS */,
    48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);


// option 1:
// Uncomment for 4" rect display
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
    4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
    10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
    15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
    1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
    1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));

// option 2:
// Uncomment for 2.1" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));

// option 3:
// Uncomment for 2.8" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 22 /* hsync_front_porch */, 3 /* hsync_pulse_width */, 45 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 4 /* vsync_front_porch */, 12 /* vsync_pulse_width */, 40 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));

// option 4:
// Uncomment for 2.0" display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     480 /* width */, 360 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type8_init_operations, sizeof(st7701_type8_init_operations));

[ESP32-S3 Raspberry Pi DPI display]

#include <Arduino_GFX_Library.h>
// #define GFX_BL 38

// e.g. Waveshare 7" RPi DPI LCD: https://www.waveshare.com/wiki/7inch_LCD_for_Pi
// dpi_timings=1024 1 40 48 128 600 1 13 3 45 0 0 0 60 0 37000000 6
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
    4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
    10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
    15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
    1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 128 /* hsync_back_porch */,
    1 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 45 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);

[ESP32S3 2.1 TP]

#include <Arduino_GFX_Library.h>
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 39 /* CS */,
    48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);

Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
    4 /* R0 */, 5 /* R1 */, 6 /* R2 */, 7 /* R3 */, 15 /* R4 */,
    8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,
    11 /* B0 */, 12 /* B1 */, 13 /* B2 */, 14 /* B3 */, 0 /* B4 */,
    1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
    1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));

LILYGO T-Deck

#include <Arduino_GFX_Library.h>
#define GFX_EXTRA_PRE_INIT()                         \
  {                                                  \
    pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT);       \
    digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH);    \
    pinMode(9 /* TDECK_RADIO_CS */, OUTPUT);         \
    digitalWrite(9 /* TDECK_RADIO_CS */, HIGH);      \
    pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT);    \
    digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \
    delay(500);                                      \
  }#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);

LILYGO T-DISPLAY

#include <Arduino_GFX_Library.h>
#define GFX_BL 4
Arduino_DataBus *bus = new Arduino_ESP32SPI(16 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 23 /* RST */, 0 /* rotation */, true /* IPS */, 135 /* width */, 240 /* height */, 52 /* col offset 1 */, 40 /* row offset 1 */, 53 /* col offset 2 */, 40 /* row offset 2 */);

LILYGO T-DISPLAY-S3

#include <Arduino_GFX_Library.h>
#define GFX_EXTRA_PRE_INIT()          \
  {                                   \
    pinMode(15 /* PWD */, OUTPUT);    \
    digitalWrite(15 /* PWD */, HIGH); \
  }
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_ESP32PAR8Q(
    7 /* DC */, 6 /* CS */, 8 /* WR */, 9 /* RD */,
    39 /* D0 */, 40 /* D1 */, 41 /* D2 */, 42 /* D3 */, 45 /* D4 */, 46 /* D5 */, 47 /* D6 */, 48 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 5 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);

LILYGO T-Display-S3 AMOLED

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
    6 /* cs */, 47 /* sck */, 18 /* d0 */, 7 /* d1 */, 48 /* d2 */, 5 /* d3 */);
Arduino_GFX *gfx = new Arduino_RM67162(bus, 17 /* RST */, 0 /* rotation */);

LILYGO T-RGB

#include <Arduino_GFX_Library.h>
#include <Wire.h>
#define GFX_EXTRA_PRE_INIT()                                    \
  {                                                             \
    Wire.begin(8 /* SDA */, 48 /* SCL */, 800000L /* speed */); \
  }
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_XL9535SWSPI(8 /* SDA */, 48 /* SCL */, 2 /* XL PWD */, 3 /* XL CS */, 5 /* XL SCK */, 4 /* XL MOSI */);
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    45 /* DE */, 41 /* VSYNC */, 47 /* HSYNC */, 42 /* PCLK */,
    21 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 15 /* R4 */,
    14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 10 /* G4 */, 9 /* G5 */,
    7 /* B0 */, 6 /* B1 */, 5 /* B2 */, 3 /* B3 */, 2 /* B4 */,
    1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
    1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */,
    1 /* pclk_active_neg */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type4_init_operations, sizeof(st7701_type4_init_operations));

LILYGO T-QT

#define GFX_EXTRA_PRE_INIT()        \
  {                                 \
    pinMode(10 /* BL */, OUTPUT);   \
    digitalWrite(10 /* BL */, LOW); \
  }
Arduino_DataBus *bus = new Arduino_ESP32SPI(6 /* DC */, 5 /* CS */, 3 /* SCK */, 2 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */);

LILYGO T-Watch 2021

#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 27 /* RST */, 0 /* rotation */, true /* IPS */);

Makerfabs ESP32 3.5" TFT Touch with Camera

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9488_18bit(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);

Makerfabs ESP32-S3 TFT 4.0"

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 1 /* CS */,
    12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    45 /* DE */, 4 /* VSYNC */, 5 /* HSYNC */, 21 /* PCLK */,
    39 /* R0 */, 40 /* R1 */, 41 /* R2 */, 42 /* R3 */, 2 /* R4 */,
    0 /* G0 */, 9 /* G1 */, 14 /* G2 */, 47 /* G3 */, 48 /* G4 */, 3 /* G5 */,
    6 /* B0 */, 7 /* B1 */, 15 /* B2 */, 16 /* B3 */, 8 /* B4 */,
    1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
    1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));

Makerfabs ESP32-S3 TFT 4.3" v1.3

#include <Arduino_GFX_Library.h>
#define GFX_BL 2
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
    45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
    5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
    8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
    0 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 88 /* hsync_back_porch */,
    0 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 32 /* vsync_back_porch */,
    1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);

WT32-SC01

#include <Arduino_GFX_Library.h>
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 22 /* RST */, 3 /* rotation */);

Elecrow Wizee-ESP32 WZ8048C050

#include <Arduino_GFX_Library.h>
#define GFX_BL 2
// ILI6122
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 0 /* PCLK */,
    45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
    5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
    8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
    0 /* hsync_polarity */, 8 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 32 /* hsync_back_porch */,
    0 /* vsync_polarity */, 8 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
    1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);

ZX2D10GE10R-V4848

#include <Arduino_GFX_Library.h>
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 21 /* CS */,
    47 /* SCK */, 41 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    39 /* DE */, 48 /* VSYNC */, 40 /* HSYNC */, 45 /* PCLK */,
    10 /* R0 */, 16 /* R1 */, 9 /* R2 */, 15 /* R3 */, 46 /* R4 */,
    8 /* G0 */, 13 /* G1 */, 18 /* G2 */, 12 /* G3 */, 11 /* G4 */, 17 /* G5 */,
    47 /* B0 */, 41 /* B1 */, 0 /* B2 */, 42 /* B3 */, 14 /* B4 */,
    1 /* hsync_polarity */, 10 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 10 /* hsync_back_porch */,
    1 /* vsync_polarity */, 14 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 12 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, st7701_type7_init_operations, sizeof(st7701_type7_init_operations));

ZX3D50CE02S (or called "WT32-SC01 PLUS")

#include <Arduino_GFX_Library.h>
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32LCD8(
    0 /* DC */, GFX_NOT_DEFINED /* CS */, 47 /* WR */, GFX_NOT_DEFINED /* RD */,
    9 /* D0 */, 46 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 4 /* RST */, 0 /* rotation */, true /* IPS */);

ZX3D95CE01S-AR

#include <Arduino_GFX_Library.h>
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_SWSPI(
    GFX_NOT_DEFINED /* DC */, 0 /* CS */,
    10 /* SCK */, 9 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,
    2 /* R0 */, 17 /* R1 */, 16 /* R2 */, 1 /* R3 */, 15 /* R4 */,
    41 /* G0 */, 46 /* G1 */, 3 /* G2 */, 42 /* G3 */, 8 /* G4 */, 18 /* G5 */,
    10 /* B0 */, 9 /* B1 */, 40 /* B2 */, 20 /* B3 */, 19 /* B4 */,
    1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
    1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
    480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
    bus, GFX_NOT_DEFINED /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations));

Predefined board in Arduino IDE

ESP32-S3-BOX

#include <Arduino_GFX_Library.h>
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, 0 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 48 /* RST */, 0 /* rotation */);

ESPboy

#include <Arduino_GFX_Library.h>
Arduino_DataBus *bus = new Arduino_ESP8266SPI(16 /* DC */, -1 /* CS */);
Arduino_GFX *gfx = new Arduino_ST7735(bus, -1 /* RST */, 0 /* rotation */, false /* IPS */,
    128 /* width */, 128 /* height */, 2 /* col offset 1 */, 3 /* row offset 1 */, 2 /* col offset 2 */, 1 /* row offset 2 */);

M5Stack

#include <Arduino_GFX_Library.h>
// #define GFX_BL 32
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 14 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 33 /* RST */, 2 /* rotation */);

[M5Stack AtomS3](https://shop.m5stack.com/products/ 

#include <Arduino_GFX_Library.h>
#define GFX_BL 16
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 17 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 34 /* RST */, 0 /* rotation */, true /* IPS */);

Odroid-Go

#include <Arduino_GFX_Library.h>
// #define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 5 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */);

Open-SmartWatch

provided by cosismo

#include <Arduino_GFX_Library.h>
#define TFT_BL 9
Arduino_DataBus *bus = new Arduino_ESP32SPI(12 /* DC */, 5 /* CS */, 18 /* SCK */, 23 /* MOSI */, -1 /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 33 /* RST */, 3 /* rotation */, true /* IPS */);

LILYGO T-Watch

#include <Arduino_GFX_Library.h>
#define GFX_BL 12
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);

Waveshare Pico LCD 1.3

#include <Arduino_GFX_Library.h>
#define TFT_BL 13
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, UINT8_MAX /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 12 /* RST */, 3 /* rotation */, true /* IPS */, 240, 240, 0, 80);

Waveshare RP2040 LCD 1.28

#include <Arduino_GFX_Library.h>
#define GFX_BL 25
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, 12 /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */);

Wio Terminal

#include <Arduino_GFX_Library.h>
// #define TFT_BL LCD_BACKLIGHT
Arduino_DataBus *bus = new Arduino_HWSPI(LCD_DC /* DC */, LCD_SS_PIN /* CS */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, -1 /* RST */, 3 /* rotation */);
Clone this wiki locally