Display stopped working after using PROGMEM sketch

[Wanhallen]

Hello. Im currently using Arduino_GFX with my gc9a01 round display. It worked fine for me, until i used this particular sketch : ImgViewerPROGMEM.

The problem is: my LCD stopped working after this one code. Idk why. It worked for once. After arduino reboot, screen just went black and nothing happens. I've tried different : arduino nano, gc9a01 screens, wires, sketches ofc and even different PC. Nothing.

The funny thing is: i've also tried a st7789 display with arduino_gfx libs, Everything was ok untill this exact ImgViewerPROGMEM sketch )

It may be just a bad coincidence, but i just wanna make sure. Can this issue caused by a code? May be something with PROGMEM thing?
Thanks for answers )

[moononournation]

After compiled, it will show the flash and memory usage. Can you show this information here?

[laoadam]

Nop. I used example of TFT--- to test the wiring only. then upload the example from "GFX_Library_for_Arduino". actually none of the example works GC9A01 but all work for ILI9341.

[moononournation]

ok, then any GC9A01 connection photo?

[laoadam]

Yes. I didn't find the upload image here, the link is a hosting. The picture taken with a TFT clock example.
https://ibb.co/VqZn7DL
Thanks.

[moononournation]

https://user-images.githubusercontent.com/13228891/193070625-023a30d1-ddc1-43f3-bf13-1bf84cc7db55.MOV
just make a quick test, everything works fine.

[laoadam]

I selected board: ESP32-WROOM-DA Module, is it OK? and got rebooting, what can be?

if add: Arduino_GFX gfx = new Arduino_GC9A01(bus, DF_GFX_RST, 7 / RST /, 0 / rotation /, true / IPS */);
got a full screen snow; without 'DF_GFX_RST, ' , got keep rebooting.
https://ibb.co/5MvVBRs

are there any special setting?

serial print:
16:09:12.677 -> ets Jun 8 2016 00:22:57
16:09:12.711 ->
16:09:12.711 -> rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
16:09:12.711 -> configsip: 0, SPIWP:0xee
16:09:12.711 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
16:09:12.711 -> mode:DIO, clock div:1
16:09:12.711 -> load:0x3fff0030,len:1344
16:09:12.711 -> load:0x40078000,len:13864
16:09:12.711 -> load:0x40080400,len:3608
16:09:12.711 -> entry 0x400805f0