WARN com.diozero.sbc.UnknownBoardInfo.get

[Plamen22]

Hi!

A week ago it was working without warning!

22:55:10.281 [main] WARN com.diozero.sbc.UnknownBoardInfo.get - Failed to resolve board info for hardware 'Raspberry Pi 4 Model B Rev 1.5' and revision 'c03115'. Local O/S: Linux-aarch64
22:55:10.521 [main] WARN com.diozero.internal.provider.builtin.DefaultDeviceFactory.start - GPIO pull-up / pull-down control is not available for this board

Maven project

com.diozero
diozero-core
1.3.5

[mattjlewis]

Strange - have tested with latest code that will soon form 1.4.0 and can't reproduce. Created a test case in SystemInfoTest to validate. Also 1.4.0 adds support for pull-up/down via GPIO chardev, not just via mmap control.

[Plamen22]

Is it possible that the problem is in Tinylog?

[mattjlewis]

Can you run this command please (this is from the 1.3.5 release):

java -cp diozero-sampleapps-1.3.5.jar com.diozero.sampleapps.SystemInformation

Output should be similar to this (your revision 'c03115' is for 4GB rev 1.5 4B):

If you still get the errors please run with debug enabled:

java [email protected]=debug -cp diozero-sampleapps-1.3.5.jar com.diozero.sampleapps.SystemInformation

[Plamen22]

I don't know if I'm doing it right ?

[mattjlewis]

Please extract the full distribution ZIP file and run from within that directory - it will need diozero-core-1.3.5.jar, diozero-sampleapps-1.3.5.jar, tinylog-api-2.5.0.jar, tinylog-impl-2.5.0.jar and jansi-2.4.0.jar to run

[Plamen22]

[mattjlewis]

Thanks for this, definitely something worth investigating here. Are you able to share the full text output from running the command please?

[Plamen22]

[mattjlewis]

Thanks for your patience. I was able to reproduce this using 1.3.5 on Raspberry Pi OS Bookworm on Pi4. I can confirm that I do not experience this issue when running the soon to be released 1.4.0.

[Plamen22]

Should I go back to debian 11 bullseye, will that fix the problem?
Will we be able to take advantage of Maven Diozero 1.4.0 soon?

Sorry for the english

Thank you for understanding

[mattjlewis]

I will definitely release 1.4.0 this week

[Plamen22]

Great :)

[mattjlewis]

Just released 1.4.0, please confirm if it resolves your problem.

[Plamen22]

I don't have time to test it at the moment, but I will write to you as soon as possible.