Bill of Materials

In an effort to source electronics locally, most components were purchased via Elmwood Electronics in Toronto. In addition, the laser-cutting for the box was also provided by Elmwood Electronics.

Elmwood Electronics has a US-based sister store, Chicago Electronics Distributors.

The bill of materials will include links to the parts sourced from these two stores. First link (EE) will be Elmwood (Canadian-based) second link (CED) will be Chicago (US-based). T NT will precede each part to indicate which version (Toggle or No-Toggle) requires the part. Quantity reflects quantity to order. For example, the 10k ohm resistors come in a 20-pack, but only 3 are needed for the No-Toggle version.

• T NT 10K ohm resistors 1 EE CED
• T 330 ohm resistors 1 EE CED No listing
• T NT 28mm Arcade button 3 EE CED Note CED's arcade button is a 30mm
• T NT Arduino Micro 1 EE CED
• T NT 1/2 sized Breadboard 1 EE CED (this is for a no soldering route)
• T NT Breadboard wire bundle 1 EE CED
• T 5mm LED 1 EE CED Note for CED this is 1-color pack of 25
• T 5mm LED holder 2 EE CED Note CED is a 5-pack. Quantity to purchase 1.
• T Toggle switch 1 EE CED
• T NT Quick connect wire pairs 1 [EE] (https://elmwoodelectronics.ca/products/arcade-button-quick-connect-wire-pair-set-of-10-pairs) [CED(https://chicagodist.com/products/adafruit-arcade-button-quick-connect-wire-pair-set-of-10-pairs)
• T NT USB MicroB to USB A cable EE CED