FreeRTOSConfig.h

#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

#include <io.h>

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
 *
 * See http://www.freertos.org/a00110.html.
 *----------------------------------------------------------*/

#define configUSE_PREEMPTION            1
#define configUSE_IDLE_HOOK                     0
#define configUSE_TICK_HOOK                     0
#define configCPU_CLOCK_HZ                      ( ( unsigned portLONG ) 8000000 ) /* Clock setup from main.c in the demo application. */
#define configTICK_RATE_HZ                      ( ( portTickType ) 1000 )
#define configMAX_PRIORITIES            ( ( unsigned portBASE_TYPE ) 4 )
#define configMINIMAL_STACK_SIZE        ( ( unsigned portSHORT ) 200 )
#define configTOTAL_HEAP_SIZE           ( ( size_t ) ( 6000 ) )
#define configMAX_TASK_NAME_LEN         ( 8 )
#define configUSE_TRACE_FACILITY        0
#define configUSE_16_BIT_TICKS          1
#define configIDLE_SHOULD_YIELD         1

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES           0
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */

#define INCLUDE_vTaskPrioritySet                0
#define INCLUDE_uxTaskPriorityGet               0
#define INCLUDE_vTaskDelete                             1
#define INCLUDE_vTaskCleanUpResources   0
#define INCLUDE_vTaskSuspend                    1
#define INCLUDE_vTaskDelayUntil                 1
#define INCLUDE_vTaskDelay                              1

/* This is the raw value as per the Cortex-M3 NVIC.  Values can be 255
(lowest) to 0 (1?) (highest). */
#define configKERNEL_INTERRUPT_PRIORITY                 255
#define configMAX_SYSCALL_INTERRUPT_PRIORITY    191 /* equivalent to 0xb0, or priority 11. */


/* This is the value being used as per the ST library which permits 16
priority values, 0 to 15.  This must correspond to the
configKERNEL_INTERRUPT_PRIORITY setting.  Here 15 corresponds to the lowest
NVIC value of 255. */
#define configLIBRARY_KERNEL_INTERRUPT_PRIORITY 15







#endif /* FREERTOS_CONFIG_H */