diff --git a/ultimaker_absr_175.xml.fdm_material b/ultimaker_absr_175.xml.fdm_material
index a6b6566fc..5b3566e40 100644
--- a/ultimaker_absr_175.xml.fdm_material
+++ b/ultimaker_absr_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>88c8919c-6a09-471a-b7b6-e801263d862d</GUID>
         <reference_material_id>abs-wss1</reference_material_id>
-        <version>8</version>
+        <version>9</version>
         <color_code>#8cb219</color_code>
         <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
         <adhesion_info>No glue needed</adhesion_info>
@@ -55,7 +55,7 @@
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL" />
             <setting key="build volume temperature">85</setting>
             <setting key="heated bed temperature">95</setting>
-            <cura:setting key="material_bed_temperature_layer_0">100</cura:setting>
+            <cura:setting key="material_bed_temperature_layer_0">95</cura:setting>
             <hotend id="1A">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_nylon12-cf_175.xml.fdm_material b/ultimaker_nylon12-cf_175.xml.fdm_material
index b94ed62b5..5a9adf1d0 100644
--- a/ultimaker_nylon12-cf_175.xml.fdm_material
+++ b/ultimaker_nylon12-cf_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>3c6f2877-71cc-4760-84e6-4b89ab243e3b</GUID>
         <reference_material_id>nylon12-cf</reference_material_id>
-        <version>6</version>
+        <version>7</version>
         <color_code>#0e0e10</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -22,8 +22,6 @@
     <settings>
         <setting key="print temperature">270</setting>
         <setting key="standby temperature">200</setting>
-        <setting key="heated bed temperature">95</setting>
-        <setting key="build volume temperature">85</setting>
         <setting key="print cooling">0</setting>
         <setting key="hardware compatible">yes</setting>
         <cura:setting key="material_shrinkage_percentage">100.44</cura:setting>
@@ -77,6 +75,8 @@
 
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL" />
+            <setting key="build volume temperature">85</setting>
+            <setting key="heated bed temperature">95</setting>
             <hotend id="1A">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_pla_175.xml.fdm_material b/ultimaker_pla_175.xml.fdm_material
index fdd8ea916..ff82dfc71 100644
--- a/ultimaker_pla_175.xml.fdm_material
+++ b/ultimaker_pla_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>abb9c58e-1f56-48d1-bd8f-055fde3a5b56</GUID>
         <reference_material_id>pla</reference_material_id>
-        <version>27</version>
+        <version>28</version>
         <color_code>#2E5266</color_code>
         <description>Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality.</description>
         <adhesion_info>Print directly on a clean build surface, a raft will help with adhesion and dimensional accuracy.</adhesion_info>
@@ -63,6 +63,8 @@
             <setting key="print temperature">210</setting>
             <setting key="standby temperature">160</setting>
             <setting key="build volume temperature">40</setting>
+            <setting key="heated bed temperature">40</setting>
+            <cura:setting key="material_bed_temperature_layer_0">45</cura:setting>
             <setting key="print cooling">100</setting>
 
             <hotend id="1A">
diff --git a/ultimaker_pva_175.xml.fdm_material b/ultimaker_pva_175.xml.fdm_material
index 6d6213301..2cde220ca 100644
--- a/ultimaker_pva_175.xml.fdm_material
+++ b/ultimaker_pva_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>add51ef2-86eb-4c39-afd5-5586564f0715</GUID>
         <reference_material_id>pva</reference_material_id>
-        <version>4</version>
+        <version>5</version>
         <color_code>#f5f2d1</color_code>
         <description>Water soluble support material. PVA is a matching support material for PLA and Nylon 12 CF.</description>
         <adhesion_info>Do not attempt to print PVA directly on your build surface, PVA needs a layer of model material below to ensure proper adhesion.</adhesion_info>
@@ -31,10 +31,38 @@
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method" />
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method X" />
+            <setting key="print temperature">210</setting>
+            <setting key="standby temperature">160</setting>
+            <setting key="build volume temperature">60</setting>
+            <setting key="print cooling">0</setting>
+            <cura:setting key="prime_tower_enable">=extruder_nr==support_extruder_nr or extruder_nr==raft_base_extruder_nr or extruder_nr==raft_interface_extruder_nr or extruder_nr==raft_surface_extruder_nr</cura:setting>
+            <cura:setting key="support_conical_enabled">False</cura:setting>
+
+            <hotend id="1A">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="1XA">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="2A">
+                <setting key="hardware compatible">yes</setting>
+            </hotend>
+            <hotend id="2XA">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="1C">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="LABS">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+        </machine>
+        <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL" />
             <setting key="print temperature">210</setting>
             <setting key="standby temperature">160</setting>
-            <setting key="build volume temperature">40</setting>
+            <setting key="build volume temperature">60</setting>
+            <setting key="heated bed temperature">60</setting>
             <setting key="print cooling">0</setting>
             <cura:setting key="prime_tower_enable">=extruder_nr==support_extruder_nr or extruder_nr==raft_base_extruder_nr or extruder_nr==raft_interface_extruder_nr or extruder_nr==raft_surface_extruder_nr</cura:setting>
             <cura:setting key="support_conical_enabled">False</cura:setting>
diff --git a/ultimaker_sr30_175.xml.fdm_material b/ultimaker_sr30_175.xml.fdm_material
index 6c523c6b7..1181e9fca 100644
--- a/ultimaker_sr30_175.xml.fdm_material
+++ b/ultimaker_sr30_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>77873465-83a9-4283-bc44-4e542b8eb3eb</GUID>
         <reference_material_id>sr30</reference_material_id>
-        <version>5</version>
+        <version>6</version>
         <color_code>#f5f2d1</color_code>
         <description>Dissolvable support material works seamlessly with ABS, ASA, and various other high-temp materials.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -24,8 +24,6 @@
         <!-- print settings -->
         <setting key="print temperature">255</setting>
         <setting key="standby temperature">175</setting>
-        <setting key="build volume temperature">107</setting>
-        <setting key="heated bed temperature">60</setting>
         <setting key="print cooling">0</setting>
 
         <!-- Define as soluble support material -->
@@ -35,7 +33,30 @@
 
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method X" />
+            <setting key="build volume temperature">107</setting>
+            <hotend id="1A">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="1XA">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="2A">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="2XA">
+                <setting key="hardware compatible">yes</setting>
+            </hotend>
+            <hotend id="1C">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+            <hotend id="LABS">
+                <setting key="hardware compatible">no</setting>
+            </hotend>
+        </machine>
+        <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL" />
+            <setting key="build volume temperature">85</setting>
+            <setting key="heated bed temperature">95</setting>
             <hotend id="1A">
                 <setting key="hardware compatible">no</setting>
             </hotend>