diff --git a/generic_abs.xml.fdm_material b/generic_abs.xml.fdm_material index 68536eaf5..c0501547d 100644 --- a/generic_abs.xml.fdm_material +++ b/generic_abs.xml.fdm_material @@ -10,7 +10,7 @@ Generic ABS profile. The data in this file may not be correct for your specific Generic 60636bb4-518f-42e7-8237-fe77b194ebe0 - 34 + 35 #8cb219 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -40,8 +40,8 @@ Generic ABS profile. The data in this file may not be correct for your specific 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -54,9 +54,15 @@ Generic ABS profile. The data in this file may not be correct for your specific 0.8 0 + + + 230 + + + 230 @@ -69,7 +75,6 @@ Generic ABS profile. The data in this file may not be correct for your specific yes - 225 40 6.5 @@ -108,7 +113,6 @@ Generic ABS profile. The data in this file may not be correct for your specific 85 yes - 225 40 @@ -127,7 +131,6 @@ Generic ABS profile. The data in this file may not be correct for your specific 85 yes - 225 40 diff --git a/generic_cpe.xml.fdm_material b/generic_cpe.xml.fdm_material index 51d69ab97..2b78d43cc 100644 --- a/generic_cpe.xml.fdm_material +++ b/generic_cpe.xml.fdm_material @@ -10,7 +10,7 @@ Generic CPE profile. The data in this file may not be correct for your specific Generic 12f41353-1a33-415e-8b4f-a775a6c70cc6 - 37 + 38 #159499 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -40,8 +40,8 @@ Generic CPE profile. The data in this file may not be correct for your specific 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -52,9 +52,15 @@ Generic CPE profile. The data in this file may not be correct for your specific 0.8 0 + + + 240 + + + 240 @@ -69,7 +75,6 @@ Generic CPE profile. The data in this file may not be correct for your specific all yes - 230 6.5 @@ -105,7 +110,6 @@ Generic CPE profile. The data in this file may not be correct for your specific 85 yes - 230 6.5 @@ -126,7 +130,6 @@ Generic CPE profile. The data in this file may not be correct for your specific yes - 230 6.5 diff --git a/generic_cpe_plus.xml.fdm_material b/generic_cpe_plus.xml.fdm_material index 3ac962894..5f4f89b8f 100644 --- a/generic_cpe_plus.xml.fdm_material +++ b/generic_cpe_plus.xml.fdm_material @@ -10,7 +10,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific Generic e2409626-b5a0-4025-b73e-b58070219259 - 37 + 38 #3633F2 Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC. Use glue for small prints. An adhesion sheet is recommended for larger prints. @@ -40,8 +40,8 @@ Generic CPE+ profile. The data in this file may not be correct for your specific 0.92 - 260 - 160 + 270 + 170 107 41 0 @@ -53,9 +53,15 @@ Generic CPE+ profile. The data in this file may not be correct for your specific 0.8 0 + + + 260 + + + 260 yes diff --git a/generic_nylon.xml.fdm_material b/generic_nylon.xml.fdm_material index 09cc99a6d..ef06f8c63 100644 --- a/generic_nylon.xml.fdm_material +++ b/generic_nylon.xml.fdm_material @@ -10,7 +10,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi Generic 28fb4162-db74-49e1-9008-d05f1e8bef5c - 31 + 32 #3DF266 Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity. Use glue. @@ -40,8 +40,8 @@ Generic Nylon profile. The data in this file may not be correct for your specifi 0.91 - 245 - 145 + 250 + 150 60 35 8 @@ -55,9 +55,15 @@ Generic Nylon profile. The data in this file may not be correct for your specifi 0.8 0 + + + 245 + + + 245 @@ -73,7 +79,6 @@ Generic Nylon profile. The data in this file may not be correct for your specifi yes - 230 6.5 @@ -112,7 +117,6 @@ Generic Nylon profile. The data in this file may not be correct for your specifi yes - 230 6.5 45 @@ -135,7 +139,6 @@ Generic Nylon profile. The data in this file may not be correct for your specifi yes - 230 6.5 45 diff --git a/generic_pc.xml.fdm_material b/generic_pc.xml.fdm_material index 447cd2eff..1616b367f 100644 --- a/generic_pc.xml.fdm_material +++ b/generic_pc.xml.fdm_material @@ -10,7 +10,7 @@ Generic PC profile. The data in this file may not be correct for your specific m Generic 98c05714-bf4e-4455-ba27-57d74fe331e4 - 34 + 35 #F29030 Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness. Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding. @@ -40,8 +40,8 @@ Generic PC profile. The data in this file may not be correct for your specific m 0.92 - 270 - 170 + 280 + 180 107 41 0 @@ -53,9 +53,16 @@ Generic PC profile. The data in this file may not be correct for your specific m 1.0 0.8 0 + + + + 270 + + + 270 yes diff --git a/generic_petg.xml.fdm_material b/generic_petg.xml.fdm_material index c1bd57f6d..bdb098443 100644 --- a/generic_petg.xml.fdm_material +++ b/generic_petg.xml.fdm_material @@ -10,7 +10,7 @@ Generic PETG profile. The data in this file may not be correct for your specific Generic 1cbfaeb3-1906-4b26-b2e7-6f777a8c197a - 23 + 24 #ff5086 Generic PETG profile. The data in this file may not be correct for your specific machine. Use glue. @@ -77,7 +77,6 @@ Generic PETG profile. The data in this file may not be correct for your specific 85 yes - 230 yes @@ -96,7 +95,6 @@ Generic PETG profile. The data in this file may not be correct for your specific yes 85 - 230 6.5 @@ -121,7 +119,6 @@ Generic PETG profile. The data in this file may not be correct for your specific yes 85 - 230 6.5 diff --git a/generic_pla.xml.fdm_material b/generic_pla.xml.fdm_material index 5ea92524d..4bd6468d6 100644 --- a/generic_pla.xml.fdm_material +++ b/generic_pla.xml.fdm_material @@ -10,7 +10,7 @@ Generic PLA profile. The data in this file may not be correct for your specific Generic 506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9 - 34 + 35 #ffc924 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/generic_pp.xml.fdm_material b/generic_pp.xml.fdm_material index 4b615f902..be113ea52 100644 --- a/generic_pp.xml.fdm_material +++ b/generic_pp.xml.fdm_material @@ -10,7 +10,7 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n Generic aa22e9c7-421f-4745-afc2-81851694394a - 41 + 42 #85f9de Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models. Adhesion sheets are required. @@ -40,8 +40,8 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n 1.00 - 220 - 120 + 207 + 107 100 41 20 @@ -55,9 +55,15 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n 0.8 0 + + + 220 + + + 220 8 diff --git a/generic_pva.xml.fdm_material b/generic_pva.xml.fdm_material index b6dc2ff5a..00013094e 100644 --- a/generic_pva.xml.fdm_material +++ b/generic_pva.xml.fdm_material @@ -10,7 +10,7 @@ Generic PVA profile. The data in this file may not be correct for your specific Generic 86a89ceb-4159-47f6-ab97-e9953803d70f - 33 + 34 #a32bcc Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon. Use the same temperatures and adhesion method as your build material(s). @@ -40,8 +40,8 @@ Generic PVA profile. The data in this file may not be correct for your specific 0.91 - 215 - 115 + 220 + 120 60 35 true diff --git a/generic_tough_pla.xml.fdm_material b/generic_tough_pla.xml.fdm_material index 037cc466f..351fe0f7a 100644 --- a/generic_tough_pla.xml.fdm_material +++ b/generic_tough_pla.xml.fdm_material @@ -10,7 +10,7 @@ Generic Tough PLA profile. The data in this file may not be correct for your spe Generic 9d5d2d7c-4e77-441c-85a0-e9eefd4aa68c - 29 + 30 #ffc9f0 Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -40,8 +40,8 @@ Generic Tough PLA profile. The data in this file may not be correct for your spe 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/generic_tpu.xml.fdm_material b/generic_tpu.xml.fdm_material index 099c240c2..b22c91614 100644 --- a/generic_tpu.xml.fdm_material +++ b/generic_tpu.xml.fdm_material @@ -40,8 +40,8 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci 1.03 - 228 - 128 + 225 + 125 0 27 3 @@ -53,9 +53,15 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci 0.8 0 + + + 228 + + + 228 yes @@ -69,7 +75,6 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci - 223 yes @@ -104,7 +109,6 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci - 223 yes @@ -122,8 +126,6 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci - 223 - yes 20 diff --git a/ultimaker_abs_black.xml.fdm_material b/ultimaker_abs_black.xml.fdm_material index 9c6b073a4..d78eee07f 100644 --- a/ultimaker_abs_black.xml.fdm_material +++ b/ultimaker_abs_black.xml.fdm_material @@ -7,7 +7,7 @@ Black 2f9d2279-9b0e-4765-bf9b-d1e1e13f3c49 - 37 + 38 #2a292a Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_blue.xml.fdm_material b/ultimaker_abs_blue.xml.fdm_material index 299f9d8e0..8da73c5be 100644 --- a/ultimaker_abs_blue.xml.fdm_material +++ b/ultimaker_abs_blue.xml.fdm_material @@ -7,7 +7,7 @@ Blue 7c9575a6-c8d6-40ec-b3dd-18d7956bfaae - 37 + 38 #00387b Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_green.xml.fdm_material b/ultimaker_abs_green.xml.fdm_material index d3f2302e4..6dabe6205 100644 --- a/ultimaker_abs_green.xml.fdm_material +++ b/ultimaker_abs_green.xml.fdm_material @@ -7,7 +7,7 @@ Green 3400c0d1-a4e3-47de-a444-7b704f287171 - 37 + 38 #61993b Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_grey.xml.fdm_material b/ultimaker_abs_grey.xml.fdm_material index 8413668b2..010319da1 100644 --- a/ultimaker_abs_grey.xml.fdm_material +++ b/ultimaker_abs_grey.xml.fdm_material @@ -7,7 +7,7 @@ Gray 8b75b775-d3f2-4d0f-8fb2-2a3dd53cf673 - 38 + 39 #52595d Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_orange.xml.fdm_material b/ultimaker_abs_orange.xml.fdm_material index d2376edc2..1ff0035fb 100644 --- a/ultimaker_abs_orange.xml.fdm_material +++ b/ultimaker_abs_orange.xml.fdm_material @@ -7,7 +7,7 @@ Orange 0b4ca6ef-eac8-4b23-b3ca-5f21af00e54f - 37 + 38 #ed6b21 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_pearl-gold.xml.fdm_material b/ultimaker_abs_pearl-gold.xml.fdm_material index db0cc0190..4456e6fbf 100644 --- a/ultimaker_abs_pearl-gold.xml.fdm_material +++ b/ultimaker_abs_pearl-gold.xml.fdm_material @@ -7,7 +7,7 @@ Pearl Gold 7cbdb9ca-081a-456f-a6ba-f73e4e9cb856 - 37 + 38 #80643f Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_red.xml.fdm_material b/ultimaker_abs_red.xml.fdm_material index d0ae0c396..5eecdcde9 100644 --- a/ultimaker_abs_red.xml.fdm_material +++ b/ultimaker_abs_red.xml.fdm_material @@ -7,7 +7,7 @@ Red 5df7afa6-48bd-4c19-b314-839fe9f08f1f - 37 + 38 #bb1e10 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_silver-metallic.xml.fdm_material b/ultimaker_abs_silver-metallic.xml.fdm_material index 0d1c10530..799078ecb 100644 --- a/ultimaker_abs_silver-metallic.xml.fdm_material +++ b/ultimaker_abs_silver-metallic.xml.fdm_material @@ -7,7 +7,7 @@ Silver 763c926e-a5f7-4ba0-927d-b4e038ea2735 - 38 + 39 #a1a1a0 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_white.xml.fdm_material b/ultimaker_abs_white.xml.fdm_material index 99d02f2d2..57fdc8392 100644 --- a/ultimaker_abs_white.xml.fdm_material +++ b/ultimaker_abs_white.xml.fdm_material @@ -7,7 +7,7 @@ White 5253a75a-27dc-4043-910f-753ae11bc417 - 40 + 41 #ecece7 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_abs_yellow.xml.fdm_material b/ultimaker_abs_yellow.xml.fdm_material index e26e95354..91019d83c 100644 --- a/ultimaker_abs_yellow.xml.fdm_material +++ b/ultimaker_abs_yellow.xml.fdm_material @@ -7,7 +7,7 @@ Yellow e873341d-d9b8-45f9-9a6f-5609e1bcff68 - 37 + 38 #f7b500 Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. Use glue, to avoid chipping of the glass. @@ -39,8 +39,8 @@ 0.92 - 230 - 130 + 245 + 145 80 36 0 @@ -53,9 +53,15 @@ 0.8 0 + + + 230 + + + 230 @@ -68,7 +74,6 @@ yes - 225 40 6.5 @@ -107,7 +112,6 @@ 85 yes - 225 40 @@ -126,7 +130,6 @@ 85 yes - 225 40 diff --git a/ultimaker_cpe_black.xml.fdm_material b/ultimaker_cpe_black.xml.fdm_material index f0168b472..5c4588357 100644 --- a/ultimaker_cpe_black.xml.fdm_material +++ b/ultimaker_cpe_black.xml.fdm_material @@ -7,7 +7,7 @@ Black a8955dc3-9d7e-404d-8c03-0fd6fee7f22d - 40 + 41 #2a292a Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_blue.xml.fdm_material b/ultimaker_cpe_blue.xml.fdm_material index cb1b25712..f464bfa0b 100644 --- a/ultimaker_cpe_blue.xml.fdm_material +++ b/ultimaker_cpe_blue.xml.fdm_material @@ -7,7 +7,7 @@ Blue 4d816290-ce2e-40e0-8dc8-3f702243131e - 40 + 41 #00a3e0 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_dark-grey.xml.fdm_material b/ultimaker_cpe_dark-grey.xml.fdm_material index 265ca4558..525dc65b6 100644 --- a/ultimaker_cpe_dark-grey.xml.fdm_material +++ b/ultimaker_cpe_dark-grey.xml.fdm_material @@ -7,7 +7,7 @@ Dark Gray 10961c00-3caf-48e9-a598-fa805ada1e8d - 41 + 42 #4f5250 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_green.xml.fdm_material b/ultimaker_cpe_green.xml.fdm_material index 3ec903321..2af83d333 100644 --- a/ultimaker_cpe_green.xml.fdm_material +++ b/ultimaker_cpe_green.xml.fdm_material @@ -7,7 +7,7 @@ Green 7ff6d2c8-d626-48cd-8012-7725fa537cc9 - 40 + 41 #78be20 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_light-grey.xml.fdm_material b/ultimaker_cpe_light-grey.xml.fdm_material index 67beb7112..244117427 100644 --- a/ultimaker_cpe_light-grey.xml.fdm_material +++ b/ultimaker_cpe_light-grey.xml.fdm_material @@ -7,7 +7,7 @@ Light Gray 173a7bae-5e14-470e-817e-08609c61e12b - 41 + 42 #c5c7c4 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_plus_black.xml.fdm_material b/ultimaker_cpe_plus_black.xml.fdm_material index f5002b047..4b64cd4ff 100644 --- a/ultimaker_cpe_plus_black.xml.fdm_material +++ b/ultimaker_cpe_plus_black.xml.fdm_material @@ -7,7 +7,7 @@ Black 1aca047a-42df-497c-abfb-0e9cb85ead52 - 42 + 43 #0e0e10 Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC. Use glue for small prints. An adhesion sheet is recommended for larger prints. @@ -39,8 +39,8 @@ 0.92 - 260 - 160 + 270 + 170 107 41 0 @@ -52,9 +52,15 @@ 0.8 0 + + + 260 + + + 260 yes diff --git a/ultimaker_cpe_plus_transparent.xml.fdm_material b/ultimaker_cpe_plus_transparent.xml.fdm_material index c67dd9cb2..d4383517f 100644 --- a/ultimaker_cpe_plus_transparent.xml.fdm_material +++ b/ultimaker_cpe_plus_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent a9c340fe-255f-4914-87f5-ec4fcb0c11ef - 42 + 43 #d0d0d0 Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC. Use glue for small prints. An adhesion sheet is recommended for larger prints. @@ -39,8 +39,8 @@ 0.92 - 260 - 160 + 270 + 170 107 41 0 @@ -52,9 +52,15 @@ 0.8 0 + + + 260 + + + 260 yes diff --git a/ultimaker_cpe_plus_white.xml.fdm_material b/ultimaker_cpe_plus_white.xml.fdm_material index 28ba75abe..07a98c6eb 100644 --- a/ultimaker_cpe_plus_white.xml.fdm_material +++ b/ultimaker_cpe_plus_white.xml.fdm_material @@ -7,7 +7,7 @@ White 6df69b13-2d96-4a69-a297-aedba667e710 - 42 + 43 #f1ece1 Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC. Use glue for small prints. An adhesion sheet is recommended for larger prints. @@ -39,8 +39,8 @@ 0.92 - 260 - 160 + 270 + 170 107 41 0 @@ -52,9 +52,15 @@ 0.8 0 + + + 260 + + + 260 yes diff --git a/ultimaker_cpe_red.xml.fdm_material b/ultimaker_cpe_red.xml.fdm_material index 4333c04b6..24dc6b0f6 100644 --- a/ultimaker_cpe_red.xml.fdm_material +++ b/ultimaker_cpe_red.xml.fdm_material @@ -7,7 +7,7 @@ Red 00181d6c-7024-479a-8eb7-8a2e38a2619a - 40 + 41 #c8102e Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_transparent.xml.fdm_material b/ultimaker_cpe_transparent.xml.fdm_material index 3443ddbc4..1018e79d3 100644 --- a/ultimaker_cpe_transparent.xml.fdm_material +++ b/ultimaker_cpe_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent bd0d9eb3-a920-4632-84e8-dcd6086746c5 - 40 + 41 #d0d0d0 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_white.xml.fdm_material b/ultimaker_cpe_white.xml.fdm_material index de9f262ab..473c36a8f 100644 --- a/ultimaker_cpe_white.xml.fdm_material +++ b/ultimaker_cpe_white.xml.fdm_material @@ -7,7 +7,7 @@ White 881c888e-24fb-4a64-a4ac-d5c95b096cd7 - 40 + 41 #f1ece1 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_cpe_yellow.xml.fdm_material b/ultimaker_cpe_yellow.xml.fdm_material index 9e3f67f1d..b0fd9cff1 100644 --- a/ultimaker_cpe_yellow.xml.fdm_material +++ b/ultimaker_cpe_yellow.xml.fdm_material @@ -7,7 +7,7 @@ Yellow b9176a2a-7a0f-4821-9f29-76d882a88682 - 40 + 41 #f6b600 Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. Use glue. @@ -39,8 +39,8 @@ 0.92 - 240 - 140 + 245 + 145 85 37 0 @@ -51,9 +51,15 @@ 0.8 0 + + + 240 + + + 240 @@ -68,7 +74,6 @@ all yes - 230 6.5 @@ -104,7 +109,6 @@ 85 yes - 230 6.5 @@ -125,7 +129,6 @@ yes - 230 6.5 diff --git a/ultimaker_nylon_black.xml.fdm_material b/ultimaker_nylon_black.xml.fdm_material index d2c1f73bf..25f5c7ef2 100644 --- a/ultimaker_nylon_black.xml.fdm_material +++ b/ultimaker_nylon_black.xml.fdm_material @@ -7,7 +7,7 @@ Black c64c2dbe-5691-4363-a7d9-66b2dc12837f - 34 + 35 #27292b Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity. Use glue. @@ -39,8 +39,8 @@ 0.91 - 245 - 145 + 250 + 150 60 35 8 @@ -54,9 +54,15 @@ 0.8 0 + + + 245 + + + 245 @@ -72,7 +78,6 @@ yes - 230 6.5 @@ -111,7 +116,6 @@ yes - 230 6.5 45 @@ -134,7 +138,6 @@ yes - 230 6.5 45 diff --git a/ultimaker_nylon_transparent.xml.fdm_material b/ultimaker_nylon_transparent.xml.fdm_material index 8b7a2d2ff..b82ae61fe 100644 --- a/ultimaker_nylon_transparent.xml.fdm_material +++ b/ultimaker_nylon_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent e256615d-a04e-4f53-b311-114b90560af9 - 34 + 35 #d0d0d0 Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity. Use glue. @@ -39,8 +39,8 @@ 0.91 - 245 - 145 + 250 + 150 60 35 8 @@ -54,9 +54,15 @@ 0.8 0 + + + 245 + + + 245 @@ -72,7 +78,6 @@ yes - 230 6.5 @@ -111,7 +116,6 @@ yes - 230 6.5 45 @@ -134,7 +138,6 @@ yes - 230 6.5 45 diff --git a/ultimaker_pc_black.xml.fdm_material b/ultimaker_pc_black.xml.fdm_material index a1d774f67..b8a1892c7 100644 --- a/ultimaker_pc_black.xml.fdm_material +++ b/ultimaker_pc_black.xml.fdm_material @@ -7,7 +7,7 @@ Black e92b1f0b-a069-4969-86b4-30127cfb6f7b - 37 + 38 #0e0e10 Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness. Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding. @@ -39,8 +39,8 @@ 0.92 - 270 - 170 + 280 + 180 107 41 0 @@ -52,9 +52,16 @@ 1.0 0.8 0 + + + + 270 + + + 270 yes diff --git a/ultimaker_pc_transparent.xml.fdm_material b/ultimaker_pc_transparent.xml.fdm_material index 7ddf639da..a85811651 100644 --- a/ultimaker_pc_transparent.xml.fdm_material +++ b/ultimaker_pc_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent 8a38a3e9-ecf7-4a7d-a6a9-e7ac35102968 - 37 + 38 #d0d0d0 Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness. Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding. @@ -39,8 +39,8 @@ 0.92 - 270 - 170 + 280 + 180 107 41 0 @@ -52,9 +52,16 @@ 1.0 0.8 0 + + + + 270 + + + 270 yes diff --git a/ultimaker_pc_white.xml.fdm_material b/ultimaker_pc_white.xml.fdm_material index e9dade6d7..b53956e8d 100644 --- a/ultimaker_pc_white.xml.fdm_material +++ b/ultimaker_pc_white.xml.fdm_material @@ -7,7 +7,7 @@ White 5e786b05-a620-4a87-92d0-f02becc1ff98 - 37 + 38 #ecece7 Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness. Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding. @@ -39,8 +39,8 @@ 0.92 - 270 - 170 + 280 + 180 107 41 0 @@ -52,9 +52,16 @@ 1.0 0.8 0 + + + + 270 + + + 270 yes diff --git a/ultimaker_petg_black.xml.fdm_material b/ultimaker_petg_black.xml.fdm_material index 26d9998de..6b546ec85 100644 --- a/ultimaker_petg_black.xml.fdm_material +++ b/ultimaker_petg_black.xml.fdm_material @@ -7,7 +7,7 @@ Black 5f9f3de0-045b-48d9-84ec-19db92be7603 - 40 + 41 #2a292a Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_blue.xml.fdm_material b/ultimaker_petg_blue.xml.fdm_material index 5332fb905..491c73976 100644 --- a/ultimaker_petg_blue.xml.fdm_material +++ b/ultimaker_petg_blue.xml.fdm_material @@ -7,7 +7,7 @@ Blue 2257ab94-fb27-42e6-865c-05aa6717504b - 40 + 41 #005387 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_blue_translucent.xml.fdm_material b/ultimaker_petg_blue_translucent.xml.fdm_material index b307650a4..0d664c69f 100644 --- a/ultimaker_petg_blue_translucent.xml.fdm_material +++ b/ultimaker_petg_blue_translucent.xml.fdm_material @@ -7,7 +7,7 @@ Blue Translucent e0af2080-29fc-4b18-a5c0-42ca112f507f - 40 + 41 #0033A0 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_green.xml.fdm_material b/ultimaker_petg_green.xml.fdm_material index d543014f7..870c7363b 100644 --- a/ultimaker_petg_green.xml.fdm_material +++ b/ultimaker_petg_green.xml.fdm_material @@ -7,7 +7,7 @@ Green c8e4a85e-b256-4468-8516-0aa98c69c7d7 - 40 + 41 #008351 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_green_translucent.xml.fdm_material b/ultimaker_petg_green_translucent.xml.fdm_material index baf50344c..617f53a04 100644 --- a/ultimaker_petg_green_translucent.xml.fdm_material +++ b/ultimaker_petg_green_translucent.xml.fdm_material @@ -7,7 +7,7 @@ Green Translucent 1f3c3be1-2e60-4343-b35d-cb383958d992 - 40 + 41 #006341 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_grey.xml.fdm_material b/ultimaker_petg_grey.xml.fdm_material index 9ad2ddeb2..87283ad1d 100644 --- a/ultimaker_petg_grey.xml.fdm_material +++ b/ultimaker_petg_grey.xml.fdm_material @@ -7,7 +7,7 @@ Gray c8394116-30ba-4112-b4d9-8b2394278cb3 - 41 + 42 #575d5e Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_orange.xml.fdm_material b/ultimaker_petg_orange.xml.fdm_material index 1d415869d..de792dc4d 100644 --- a/ultimaker_petg_orange.xml.fdm_material +++ b/ultimaker_petg_orange.xml.fdm_material @@ -7,7 +7,7 @@ Orange a02a3978-eb33-47ca-b32b-d08b92b58638 - 40 + 41 #FC4C02 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_red.xml.fdm_material b/ultimaker_petg_red.xml.fdm_material index 4325767d6..8b8a720ec 100644 --- a/ultimaker_petg_red.xml.fdm_material +++ b/ultimaker_petg_red.xml.fdm_material @@ -7,7 +7,7 @@ Red 9680dff6-7aa5-400b-982c-40a0de06a718 - 40 + 41 #bb1e10 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_red_translucent.xml.fdm_material b/ultimaker_petg_red_translucent.xml.fdm_material index b3272969b..9c9b2f35f 100644 --- a/ultimaker_petg_red_translucent.xml.fdm_material +++ b/ultimaker_petg_red_translucent.xml.fdm_material @@ -7,7 +7,7 @@ Red Translucent c8639119-5cae-4f56-9bcf-3bb00e8225fd - 40 + 41 #93272C Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_silver.xml.fdm_material b/ultimaker_petg_silver.xml.fdm_material index b3d1ce419..46efc4750 100644 --- a/ultimaker_petg_silver.xml.fdm_material +++ b/ultimaker_petg_silver.xml.fdm_material @@ -7,7 +7,7 @@ Silver 40a273c6-0e15-4db5-a278-8eb0b4a9e293 - 40 + 41 #a1a1a0 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_transparent.xml.fdm_material b/ultimaker_petg_transparent.xml.fdm_material index f1f451fe9..d84c055ec 100644 --- a/ultimaker_petg_transparent.xml.fdm_material +++ b/ultimaker_petg_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent 7418eca4-e2c4-45b1-a022-37180861fd39 - 40 + 41 #d0d0d0 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_white.xml.fdm_material b/ultimaker_petg_white.xml.fdm_material index 95e0916b1..46b7fa283 100644 --- a/ultimaker_petg_white.xml.fdm_material +++ b/ultimaker_petg_white.xml.fdm_material @@ -7,7 +7,7 @@ White 61eb5c6c-0110-49de-9756-13b8c7cc2ff1 - 40 + 41 #ecece7 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_yellow.xml.fdm_material b/ultimaker_petg_yellow.xml.fdm_material index c0d77fee8..daebc3283 100644 --- a/ultimaker_petg_yellow.xml.fdm_material +++ b/ultimaker_petg_yellow.xml.fdm_material @@ -7,7 +7,7 @@ Yellow 218379df-4a67-4668-b5f8-2a14c92bce96 - 40 + 41 #f1dd38 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_petg_yellow_fluorescent.xml.fdm_material b/ultimaker_petg_yellow_fluorescent.xml.fdm_material index ea67aef1e..ebf73739e 100644 --- a/ultimaker_petg_yellow_fluorescent.xml.fdm_material +++ b/ultimaker_petg_yellow_fluorescent.xml.fdm_material @@ -7,7 +7,7 @@ Yellow Fluorescent d67a3ccb-6b51-4013-bdac-4c59e952aaf4 - 40 + 41 #B1D600 Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. Use glue. @@ -76,7 +76,6 @@ 85 yes - 230 yes @@ -95,7 +94,6 @@ yes 85 - 230 6.5 @@ -120,7 +118,6 @@ yes 85 - 230 6.5 diff --git a/ultimaker_pla_black.xml.fdm_material b/ultimaker_pla_black.xml.fdm_material index ae4be9fc6..1fa887a1e 100644 --- a/ultimaker_pla_black.xml.fdm_material +++ b/ultimaker_pla_black.xml.fdm_material @@ -7,7 +7,7 @@ Black 3ee70a86-77d8-4b87-8005-e4a1bc57d2ce - 36 + 37 #0e0e10 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_blue.xml.fdm_material b/ultimaker_pla_blue.xml.fdm_material index 4551005bf..0a7713321 100644 --- a/ultimaker_pla_blue.xml.fdm_material +++ b/ultimaker_pla_blue.xml.fdm_material @@ -7,7 +7,7 @@ Blue 44a029e6-e31b-4c9e-a12f-9282e29a92ff - 39 + 40 #00387b Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_green.xml.fdm_material b/ultimaker_pla_green.xml.fdm_material index 266ee7b27..e65eca7da 100644 --- a/ultimaker_pla_green.xml.fdm_material +++ b/ultimaker_pla_green.xml.fdm_material @@ -7,7 +7,7 @@ Green 2433b8fb-dcd6-4e36-9cd5-9f4ee551c04c - 39 + 40 #61993b Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_magenta.xml.fdm_material b/ultimaker_pla_magenta.xml.fdm_material index f17157dc7..b6e72f3e6 100644 --- a/ultimaker_pla_magenta.xml.fdm_material +++ b/ultimaker_pla_magenta.xml.fdm_material @@ -7,7 +7,7 @@ Magenta fe3982c8-58f4-4d86-9ac0-9ff7a3ab9cbc - 39 + 40 #bc4077 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_orange.xml.fdm_material b/ultimaker_pla_orange.xml.fdm_material index 4c9a2c22f..68d82641c 100644 --- a/ultimaker_pla_orange.xml.fdm_material +++ b/ultimaker_pla_orange.xml.fdm_material @@ -7,7 +7,7 @@ Orange d9549dba-b9df-45b9-80a5-f7140a9a2f34 - 39 + 40 #ed6b21 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_pearl-white.xml.fdm_material b/ultimaker_pla_pearl-white.xml.fdm_material index 2fa340988..efca1a7d4 100644 --- a/ultimaker_pla_pearl-white.xml.fdm_material +++ b/ultimaker_pla_pearl-white.xml.fdm_material @@ -7,7 +7,7 @@ Pearl-White d9fc79db-82c3-41b5-8c99-33b3747b8fb3 - 39 + 40 #e3d9c6 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_red.xml.fdm_material b/ultimaker_pla_red.xml.fdm_material index 520123dc3..dd8db5d26 100644 --- a/ultimaker_pla_red.xml.fdm_material +++ b/ultimaker_pla_red.xml.fdm_material @@ -7,7 +7,7 @@ Red 9cfe5bf1-bdc5-4beb-871a-52c70777842d - 39 + 40 #bb1e10 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_silver-metallic.xml.fdm_material b/ultimaker_pla_silver-metallic.xml.fdm_material index f550df2c8..343085b83 100644 --- a/ultimaker_pla_silver-metallic.xml.fdm_material +++ b/ultimaker_pla_silver-metallic.xml.fdm_material @@ -7,7 +7,7 @@ Silver Metallic 0e01be8c-e425-4fb1-b4a3-b79f255f1db9 - 39 + 40 #a1a1a0 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_transparent.xml.fdm_material b/ultimaker_pla_transparent.xml.fdm_material index b3bf3e4e6..8f981c32a 100644 --- a/ultimaker_pla_transparent.xml.fdm_material +++ b/ultimaker_pla_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent 532e8b3d-5fd4-4149-b936-53ada9bd6b85 - 39 + 40 #d0d0d0 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_white.xml.fdm_material b/ultimaker_pla_white.xml.fdm_material index 073bbf11e..df064e8a3 100644 --- a/ultimaker_pla_white.xml.fdm_material +++ b/ultimaker_pla_white.xml.fdm_material @@ -7,7 +7,7 @@ White e509f649-9fe6-4b14-ac45-d441438cb4ef - 39 + 40 #f1ece1 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pla_yellow.xml.fdm_material b/ultimaker_pla_yellow.xml.fdm_material index 76cb0c84c..25a5e5b00 100644 --- a/ultimaker_pla_yellow.xml.fdm_material +++ b/ultimaker_pla_yellow.xml.fdm_material @@ -7,7 +7,7 @@ Yellow 9c1959d0-f597-46ec-9131-34020c7a54fc - 39 + 40 #f9a800 Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. Print on bare glass. Use tape for cold build plates. diff --git a/ultimaker_pp_transparent.xml.fdm_material b/ultimaker_pp_transparent.xml.fdm_material index 111da74c3..dade00ec1 100644 --- a/ultimaker_pp_transparent.xml.fdm_material +++ b/ultimaker_pp_transparent.xml.fdm_material @@ -7,7 +7,7 @@ Transparent c7005925-2a41-4280-8cdd-4029e3fe5253 - 44 + 45 #d0d0d0 Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models. Adhesion sheets are required. @@ -39,8 +39,8 @@ 1.00 - 220 - 120 + 207 + 107 100 41 20 @@ -54,9 +54,15 @@ 0.8 0 + + + 220 + + + 220 8 diff --git a/ultimaker_pva.xml.fdm_material b/ultimaker_pva.xml.fdm_material index 271410199..6f580a39d 100644 --- a/ultimaker_pva.xml.fdm_material +++ b/ultimaker_pva.xml.fdm_material @@ -7,7 +7,7 @@ Natural fe15ed8a-33c3-4f57-a2a7-b4b78a38c3cb - 37 + 38 #f5f2d1 Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon. Use the same temperatures and adhesion method as your build material(s). @@ -66,8 +66,8 @@ 0.91 - 215 - 115 + 220 + 120 60 35 true diff --git a/ultimaker_tough_pla_black.xml.fdm_material b/ultimaker_tough_pla_black.xml.fdm_material index 8e06804bf..c89d70a8b 100644 --- a/ultimaker_tough_pla_black.xml.fdm_material +++ b/ultimaker_tough_pla_black.xml.fdm_material @@ -7,7 +7,7 @@ Black 03f24266-0291-43c2-a6da-5211892a2699 - 32 + 33 #2a292a Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_blue.xml.fdm_material b/ultimaker_tough_pla_blue.xml.fdm_material index 9f1b8dc98..bbe023027 100644 --- a/ultimaker_tough_pla_blue.xml.fdm_material +++ b/ultimaker_tough_pla_blue.xml.fdm_material @@ -7,7 +7,7 @@ Blue 4b049931-6ee9-408c-8588-ddd4673467d1 - 11 + 12 #1B5583 Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_gray.xml.fdm_material b/ultimaker_tough_pla_gray.xml.fdm_material index e5201d835..c256ac329 100644 --- a/ultimaker_tough_pla_gray.xml.fdm_material +++ b/ultimaker_tough_pla_gray.xml.fdm_material @@ -7,7 +7,7 @@ Gray 6660eb2e-aa40-49ad-ac9b-ada979f3de9b - 11 + 12 #78858B Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_green.xml.fdm_material b/ultimaker_tough_pla_green.xml.fdm_material index e1fb03243..5c0746e65 100644 --- a/ultimaker_tough_pla_green.xml.fdm_material +++ b/ultimaker_tough_pla_green.xml.fdm_material @@ -7,7 +7,7 @@ Green 6d71f4ad-29ab-4b50-8f65-22d99af294dd - 32 + 33 #00a95c Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_red.xml.fdm_material b/ultimaker_tough_pla_red.xml.fdm_material index 87bf77710..ee6171b8a 100644 --- a/ultimaker_tough_pla_red.xml.fdm_material +++ b/ultimaker_tough_pla_red.xml.fdm_material @@ -7,7 +7,7 @@ Red 2db25566-9a91-4145-84a5-46c90ed22bdf - 32 + 33 #de4343 Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_white.xml.fdm_material b/ultimaker_tough_pla_white.xml.fdm_material index deb756132..f091119d7 100644 --- a/ultimaker_tough_pla_white.xml.fdm_material +++ b/ultimaker_tough_pla_white.xml.fdm_material @@ -7,7 +7,7 @@ White 851427a0-0c9a-4d7c-a9a8-5cc92f84af1f - 32 + 33 #ecece7 Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tough_pla_yellow.xml.fdm_material b/ultimaker_tough_pla_yellow.xml.fdm_material index cc445b7c2..02969f09b 100644 --- a/ultimaker_tough_pla_yellow.xml.fdm_material +++ b/ultimaker_tough_pla_yellow.xml.fdm_material @@ -7,7 +7,7 @@ Yellow bfdb0787-032d-4cf5-9975-964132bd641c - 11 + 12 #F8F32B Technical PLA material with toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, Tough PLA offers the same safe and easy use as regular PLA. Print on bare glass. Use tape for cold build plates. @@ -39,8 +39,8 @@ 0.93 - 225 - 125 + 215 + 115 60 24 100 diff --git a/ultimaker_tpu_black.xml.fdm_material b/ultimaker_tpu_black.xml.fdm_material index 4a06f18bc..73db4fd7a 100644 --- a/ultimaker_tpu_black.xml.fdm_material +++ b/ultimaker_tpu_black.xml.fdm_material @@ -39,8 +39,8 @@ 1.03 - 228 - 128 + 225 + 125 0 27 3 @@ -52,9 +52,15 @@ 0.8 0 + + + 228 + + + 228 yes @@ -68,7 +74,6 @@ - 223 yes @@ -103,7 +108,6 @@ - 223 yes @@ -121,8 +125,6 @@ - 223 - yes 20 diff --git a/ultimaker_tpu_blue.xml.fdm_material b/ultimaker_tpu_blue.xml.fdm_material index 95b0f2e39..52260c973 100644 --- a/ultimaker_tpu_blue.xml.fdm_material +++ b/ultimaker_tpu_blue.xml.fdm_material @@ -39,8 +39,8 @@ 1.03 - 228 - 128 + 225 + 125 0 27 3 @@ -52,9 +52,15 @@ 0.8 0 + + + 228 + + + 228 yes @@ -68,7 +74,6 @@ - 223 yes @@ -103,7 +108,6 @@ - 223 yes @@ -121,8 +125,6 @@ - 223 - yes 20 diff --git a/ultimaker_tpu_red.xml.fdm_material b/ultimaker_tpu_red.xml.fdm_material index e2be7ca62..ceefd784c 100644 --- a/ultimaker_tpu_red.xml.fdm_material +++ b/ultimaker_tpu_red.xml.fdm_material @@ -39,8 +39,8 @@ 1.03 - 228 - 128 + 225 + 125 0 27 3 @@ -52,9 +52,15 @@ 0.8 0 + + + 228 + + + 228 yes @@ -68,7 +74,6 @@ - 223 yes @@ -103,7 +108,6 @@ - 223 yes @@ -121,8 +125,6 @@ - 223 - yes 20 diff --git a/ultimaker_tpu_white.xml.fdm_material b/ultimaker_tpu_white.xml.fdm_material index d7f5e2dab..1e82dfd12 100644 --- a/ultimaker_tpu_white.xml.fdm_material +++ b/ultimaker_tpu_white.xml.fdm_material @@ -39,8 +39,8 @@ 1.03 - 228 - 128 + 225 + 125 0 27 3 @@ -52,9 +52,15 @@ 0.8 0 + + + 228 + + + 228 yes @@ -68,7 +74,6 @@ - 223 yes @@ -103,7 +108,6 @@ - 223 yes @@ -121,8 +125,6 @@ - 223 - yes 20