From 551567cc9bf1591292c0a7c68b813d0bb852c4f8 Mon Sep 17 00:00:00 2001
From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com>
Date: Tue, 18 Jun 2024 10:19:39 +0200
Subject: [PATCH 1/2] Increase retract distance moisture sensitive materials to
 5mm.

PP-483
---
 generic_cpe.xml.fdm_material                       | 3 ++-
 generic_cpe_plus.xml.fdm_material                  | 3 ++-
 generic_nylon.xml.fdm_material                     | 4 ++--
 generic_petg.xml.fdm_material                      | 3 ++-
 generic_pp.xml.fdm_material                        | 3 ++-
 generic_tpu.xml.fdm_material                       | 4 ++--
 ultimaker_cpe.xml.fdm_material                     | 3 ++-
 ultimaker_cpe_black.xml.fdm_material               | 3 ++-
 ultimaker_cpe_blue.xml.fdm_material                | 3 ++-
 ultimaker_cpe_dark-grey.xml.fdm_material           | 3 ++-
 ultimaker_cpe_green.xml.fdm_material               | 3 ++-
 ultimaker_cpe_light-grey.xml.fdm_material          | 3 ++-
 ultimaker_cpe_plus.xml.fdm_material                | 3 ++-
 ultimaker_cpe_plus_black.xml.fdm_material          | 3 ++-
 ultimaker_cpe_plus_transparent.xml.fdm_material    | 3 ++-
 ultimaker_cpe_plus_white.xml.fdm_material          | 3 ++-
 ultimaker_cpe_red.xml.fdm_material                 | 3 ++-
 ultimaker_cpe_transparent.xml.fdm_material         | 3 ++-
 ultimaker_cpe_white.xml.fdm_material               | 3 ++-
 ultimaker_cpe_yellow.xml.fdm_material              | 3 ++-
 ultimaker_nylon.xml.fdm_material                   | 4 ++--
 ultimaker_nylon_black.xml.fdm_material             | 4 ++--
 ultimaker_nylon_transparent.xml.fdm_material       | 4 ++--
 ultimaker_petg.xml.fdm_material                    | 3 ++-
 ultimaker_petg_black.xml.fdm_material              | 3 ++-
 ultimaker_petg_blue.xml.fdm_material               | 3 ++-
 ultimaker_petg_blue_translucent.xml.fdm_material   | 3 ++-
 ultimaker_petg_green.xml.fdm_material              | 3 ++-
 ultimaker_petg_green_translucent.xml.fdm_material  | 3 ++-
 ultimaker_petg_grey.xml.fdm_material               | 3 ++-
 ultimaker_petg_orange.xml.fdm_material             | 3 ++-
 ultimaker_petg_red.xml.fdm_material                | 3 ++-
 ultimaker_petg_red_translucent.xml.fdm_material    | 3 ++-
 ultimaker_petg_silver.xml.fdm_material             | 3 ++-
 ultimaker_petg_transparent.xml.fdm_material        | 3 ++-
 ultimaker_petg_white.xml.fdm_material              | 3 ++-
 ultimaker_petg_yellow.xml.fdm_material             | 3 ++-
 ultimaker_petg_yellow_fluorescent.xml.fdm_material | 3 ++-
 ultimaker_pp_transparent.xml.fdm_material          | 3 ++-
 ultimaker_tpu.xml.fdm_material                     | 4 ++--
 ultimaker_tpu_black.xml.fdm_material               | 4 ++--
 ultimaker_tpu_blue.xml.fdm_material                | 4 ++--
 ultimaker_tpu_red.xml.fdm_material                 | 4 ++--
 ultimaker_tpu_white.xml.fdm_material               | 4 ++--
 44 files changed, 88 insertions(+), 54 deletions(-)

diff --git a/generic_cpe.xml.fdm_material b/generic_cpe.xml.fdm_material
index 372cc1729..cb09da3c1 100644
--- a/generic_cpe.xml.fdm_material
+++ b/generic_cpe.xml.fdm_material
@@ -10,7 +10,7 @@ Generic CPE profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>12f41353-1a33-415e-8b4f-a775a6c70cc6</GUID>
-        <version>40</version>
+        <version>41</version>
         <color_code>#159499</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -156,6 +156,7 @@ Generic CPE profile. The data in this file may not be correct for your specific
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/generic_cpe_plus.xml.fdm_material b/generic_cpe_plus.xml.fdm_material
index cb1923d8c..bcbe79a26 100644
--- a/generic_cpe_plus.xml.fdm_material
+++ b/generic_cpe_plus.xml.fdm_material
@@ -10,7 +10,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>e2409626-b5a0-4025-b73e-b58070219259</GUID>
-        <version>40</version>
+        <version>41</version>
         <color_code>#3633F2</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -144,6 +144,7 @@ Generic CPE+ profile. The data in this file may not be correct for your specific
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
diff --git a/generic_nylon.xml.fdm_material b/generic_nylon.xml.fdm_material
index dda6af9dd..e40cacffa 100644
--- a/generic_nylon.xml.fdm_material
+++ b/generic_nylon.xml.fdm_material
@@ -10,7 +10,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi
             <color>Generic</color>
         </name>
         <GUID>28fb4162-db74-49e1-9008-d05f1e8bef5c</GUID>
-        <version>34</version>
+        <version>35</version>
         <color_code>#3DF266</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -162,7 +162,7 @@ Generic Nylon profile. The data in this file may not be correct for your specifi
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">75</setting>
-            <setting key="retraction amount">1.5</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="anti ooze retract position">-6</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
diff --git a/generic_petg.xml.fdm_material b/generic_petg.xml.fdm_material
index faf4edfaf..83faf8ad0 100644
--- a/generic_petg.xml.fdm_material
+++ b/generic_petg.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PETG profile. The data in this file may not be correct for your specific
             <color>Generic</color>
         </name>
         <GUID>1cbfaeb3-1906-4b26-b2e7-6f777a8c197a</GUID>
-        <version>26</version>
+        <version>27</version>
         <color_code>#ff5086</color_code>
         <description>Generic PETG profile. The data in this file may not be correct for your specific machine.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -143,6 +143,7 @@ Generic PETG profile. The data in this file may not be correct for your specific
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/generic_pp.xml.fdm_material b/generic_pp.xml.fdm_material
index 0b5ff72d0..097082656 100644
--- a/generic_pp.xml.fdm_material
+++ b/generic_pp.xml.fdm_material
@@ -10,7 +10,7 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n
             <color>Generic</color>
         </name>
         <GUID>aa22e9c7-421f-4745-afc2-81851694394a</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#85f9de</color_code>
         <description>Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models.</description>
         <adhesion_info>Adhesion sheets are required.</adhesion_info>
@@ -168,6 +168,7 @@ Generic Polypropylene profile. Serves as an example file, data in this file is n
             <setting key="anti ooze retract position">-14</setting>
             <setting key="break preparation position">-14</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.7</cura:setting>
 
             <hotend id="AA 0.25">
diff --git a/generic_tpu.xml.fdm_material b/generic_tpu.xml.fdm_material
index f7af91955..e14d3c453 100644
--- a/generic_tpu.xml.fdm_material
+++ b/generic_tpu.xml.fdm_material
@@ -10,7 +10,7 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
             <color>Generic</color>
         </name>
         <GUID>1d52b2be-a3a2-41de-a8b1-3bcdb5618695</GUID>
-        <version>37</version>
+        <version>38</version>
         <color_code>#B22744</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -147,7 +147,7 @@ Generic TPU 95A profile. The data in this file may not be correct for your speci
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>
diff --git a/ultimaker_cpe.xml.fdm_material b/ultimaker_cpe.xml.fdm_material
index 3ec0ed8d8..0d9e572ce 100644
--- a/ultimaker_cpe.xml.fdm_material
+++ b/ultimaker_cpe.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color CPE</label>
         </name>
         <GUID>3cf87e76-dae0-42cb-ae86-3d39918af2ad</GUID>
-        <version>9</version>
+        <version>10</version>
         <color_code>#159499</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -157,6 +157,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_black.xml.fdm_material b/ultimaker_cpe_black.xml.fdm_material
index bc1f60aca..2b96a0f9f 100644
--- a/ultimaker_cpe_black.xml.fdm_material
+++ b/ultimaker_cpe_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>a8955dc3-9d7e-404d-8c03-0fd6fee7f22d</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#2a292a</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_blue.xml.fdm_material b/ultimaker_cpe_blue.xml.fdm_material
index 86e304d66..02e0b8f6e 100644
--- a/ultimaker_cpe_blue.xml.fdm_material
+++ b/ultimaker_cpe_blue.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Blue</color>
         </name>
         <GUID>4d816290-ce2e-40e0-8dc8-3f702243131e</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#00a3e0</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_dark-grey.xml.fdm_material b/ultimaker_cpe_dark-grey.xml.fdm_material
index 899f1b999..d7ec38f03 100644
--- a/ultimaker_cpe_dark-grey.xml.fdm_material
+++ b/ultimaker_cpe_dark-grey.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Dark Gray</color>
         </name>
         <GUID>10961c00-3caf-48e9-a598-fa805ada1e8d</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#4f5250</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_green.xml.fdm_material b/ultimaker_cpe_green.xml.fdm_material
index 845cb3086..55bee45e2 100644
--- a/ultimaker_cpe_green.xml.fdm_material
+++ b/ultimaker_cpe_green.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Green</color>
         </name>
         <GUID>7ff6d2c8-d626-48cd-8012-7725fa537cc9</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#78be20</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_light-grey.xml.fdm_material b/ultimaker_cpe_light-grey.xml.fdm_material
index bcf31b5df..842b320c7 100644
--- a/ultimaker_cpe_light-grey.xml.fdm_material
+++ b/ultimaker_cpe_light-grey.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Light Gray</color>
         </name>
         <GUID>173a7bae-5e14-470e-817e-08609c61e12b</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#c5c7c4</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus.xml.fdm_material b/ultimaker_cpe_plus.xml.fdm_material
index 4b2d46245..79249d495 100644
--- a/ultimaker_cpe_plus.xml.fdm_material
+++ b/ultimaker_cpe_plus.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color CPE+</label>
         </name>
         <GUID>4034cfaa-a512-4645-a07d-89a2dd4db91d</GUID>
-        <version>8</version>
+        <version>9</version>
         <color_code>#3633F2</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -145,6 +145,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus_black.xml.fdm_material b/ultimaker_cpe_plus_black.xml.fdm_material
index 37ce62a70..9d8c35c8e 100644
--- a/ultimaker_cpe_plus_black.xml.fdm_material
+++ b/ultimaker_cpe_plus_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>1aca047a-42df-497c-abfb-0e9cb85ead52</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#0e0e10</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus_transparent.xml.fdm_material b/ultimaker_cpe_plus_transparent.xml.fdm_material
index 7a7af3504..03c304630 100644
--- a/ultimaker_cpe_plus_transparent.xml.fdm_material
+++ b/ultimaker_cpe_plus_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>a9c340fe-255f-4914-87f5-ec4fcb0c11ef</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#d0d0d0</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_plus_white.xml.fdm_material b/ultimaker_cpe_plus_white.xml.fdm_material
index 7970b1ad6..89148b281 100644
--- a/ultimaker_cpe_plus_white.xml.fdm_material
+++ b/ultimaker_cpe_plus_white.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>6df69b13-2d96-4a69-a297-aedba667e710</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#f1ece1</color_code>
         <description>Chemically resistant and tough. CPE+ is chemically inert, tough, dimensionally stable and handles temperatures up to 100ºC.</description>
         <adhesion_info>Use glue for small prints. An adhesion sheet is recommended for larger prints.</adhesion_info>
@@ -143,6 +143,7 @@
             <setting key="anti ooze retract position">-4</setting>
             <setting key="break preparation position">-12</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
             <hotend id="AA 0.4">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_red.xml.fdm_material b/ultimaker_cpe_red.xml.fdm_material
index a82ba9bd1..deff2991e 100644
--- a/ultimaker_cpe_red.xml.fdm_material
+++ b/ultimaker_cpe_red.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Red</color>
         </name>
         <GUID>00181d6c-7024-479a-8eb7-8a2e38a2619a</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#c8102e</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_transparent.xml.fdm_material b/ultimaker_cpe_transparent.xml.fdm_material
index 629a799e1..df1ee9525 100644
--- a/ultimaker_cpe_transparent.xml.fdm_material
+++ b/ultimaker_cpe_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>bd0d9eb3-a920-4632-84e8-dcd6086746c5</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#d0d0d0</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_white.xml.fdm_material b/ultimaker_cpe_white.xml.fdm_material
index 8878f1ded..0522416e6 100644
--- a/ultimaker_cpe_white.xml.fdm_material
+++ b/ultimaker_cpe_white.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>881c888e-24fb-4a64-a4ac-d5c95b096cd7</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#f1ece1</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_cpe_yellow.xml.fdm_material b/ultimaker_cpe_yellow.xml.fdm_material
index 9c302623e..6f40267f6 100644
--- a/ultimaker_cpe_yellow.xml.fdm_material
+++ b/ultimaker_cpe_yellow.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Yellow</color>
         </name>
         <GUID>b9176a2a-7a0f-4821-9f29-76d882a88682</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#f6b600</color_code>
         <description>Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -155,6 +155,7 @@
             <setting key="anti ooze retract position">-18</setting>
             <setting key="break preparation position">-18</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_nylon.xml.fdm_material b/ultimaker_nylon.xml.fdm_material
index 0a9b73c6e..ddeff6c4d 100644
--- a/ultimaker_nylon.xml.fdm_material
+++ b/ultimaker_nylon.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color Nylon</label>
         </name>
         <GUID>c6714ed4-9734-4266-b4e1-d90b8b0c2434</GUID>
-        <version>9</version>
+        <version>10</version>
         <color_code>#3DF266</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -163,7 +163,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">75</setting>
-            <setting key="retraction amount">1.5</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="anti ooze retract position">-6</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
diff --git a/ultimaker_nylon_black.xml.fdm_material b/ultimaker_nylon_black.xml.fdm_material
index 841c2c6fc..06565f21b 100644
--- a/ultimaker_nylon_black.xml.fdm_material
+++ b/ultimaker_nylon_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>c64c2dbe-5691-4363-a7d9-66b2dc12837f</GUID>
-        <version>38</version>
+        <version>39</version>
         <color_code>#27292b</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -161,7 +161,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">75</setting>
-            <setting key="retraction amount">1.5</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="anti ooze retract position">-6</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
diff --git a/ultimaker_nylon_transparent.xml.fdm_material b/ultimaker_nylon_transparent.xml.fdm_material
index 228ec095b..26da8554b 100644
--- a/ultimaker_nylon_transparent.xml.fdm_material
+++ b/ultimaker_nylon_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>e256615d-a04e-4f53-b311-114b90560af9</GUID>
-        <version>38</version>
+        <version>39</version>
         <color_code>#d0d0d0</color_code>
         <description>Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -161,7 +161,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">75</setting>
-            <setting key="retraction amount">1.5</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="anti ooze retract position">-6</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.4</cura:setting>
diff --git a/ultimaker_petg.xml.fdm_material b/ultimaker_petg.xml.fdm_material
index 100d534aa..5c792fe27 100644
--- a/ultimaker_petg.xml.fdm_material
+++ b/ultimaker_petg.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color PETG</label>
         </name>
         <GUID>91bd2402-1766-4cb0-9b21-6435e5095395</GUID>
-        <version>9</version>
+        <version>10</version>
         <color_code>#ff5086</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -144,6 +144,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_black.xml.fdm_material b/ultimaker_petg_black.xml.fdm_material
index f8777ba12..cab86755e 100644
--- a/ultimaker_petg_black.xml.fdm_material
+++ b/ultimaker_petg_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>5f9f3de0-045b-48d9-84ec-19db92be7603</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#2a292a</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_blue.xml.fdm_material b/ultimaker_petg_blue.xml.fdm_material
index 0da6946ec..6f2b3874d 100644
--- a/ultimaker_petg_blue.xml.fdm_material
+++ b/ultimaker_petg_blue.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Blue</color>
         </name>
         <GUID>2257ab94-fb27-42e6-865c-05aa6717504b</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#005387</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_blue_translucent.xml.fdm_material b/ultimaker_petg_blue_translucent.xml.fdm_material
index 682cfa0cf..c169500fc 100644
--- a/ultimaker_petg_blue_translucent.xml.fdm_material
+++ b/ultimaker_petg_blue_translucent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Blue Translucent</color>
         </name>
         <GUID>e0af2080-29fc-4b18-a5c0-42ca112f507f</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#0033A0</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_green.xml.fdm_material b/ultimaker_petg_green.xml.fdm_material
index 7109c34dd..4b059c315 100644
--- a/ultimaker_petg_green.xml.fdm_material
+++ b/ultimaker_petg_green.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Green</color>
         </name>
         <GUID>c8e4a85e-b256-4468-8516-0aa98c69c7d7</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#008351</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_green_translucent.xml.fdm_material b/ultimaker_petg_green_translucent.xml.fdm_material
index 189cc16c0..70c289744 100644
--- a/ultimaker_petg_green_translucent.xml.fdm_material
+++ b/ultimaker_petg_green_translucent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Green Translucent</color>
         </name>
         <GUID>1f3c3be1-2e60-4343-b35d-cb383958d992</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#006341</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_grey.xml.fdm_material b/ultimaker_petg_grey.xml.fdm_material
index 17ba13734..470f3f938 100644
--- a/ultimaker_petg_grey.xml.fdm_material
+++ b/ultimaker_petg_grey.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Gray</color>
         </name>
         <GUID>c8394116-30ba-4112-b4d9-8b2394278cb3</GUID>
-        <version>45</version>
+        <version>46</version>
         <color_code>#575d5e</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_orange.xml.fdm_material b/ultimaker_petg_orange.xml.fdm_material
index 8007c40cd..a807eb589 100644
--- a/ultimaker_petg_orange.xml.fdm_material
+++ b/ultimaker_petg_orange.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Orange</color>
         </name>
         <GUID>a02a3978-eb33-47ca-b32b-d08b92b58638</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#FC4C02</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_red.xml.fdm_material b/ultimaker_petg_red.xml.fdm_material
index 93ee17fa7..dc7207e8a 100644
--- a/ultimaker_petg_red.xml.fdm_material
+++ b/ultimaker_petg_red.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Red</color>
         </name>
         <GUID>9680dff6-7aa5-400b-982c-40a0de06a718</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#bb1e10</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_red_translucent.xml.fdm_material b/ultimaker_petg_red_translucent.xml.fdm_material
index 2dcba2f97..9de8ff46d 100644
--- a/ultimaker_petg_red_translucent.xml.fdm_material
+++ b/ultimaker_petg_red_translucent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Red Translucent</color>
         </name>
         <GUID>c8639119-5cae-4f56-9bcf-3bb00e8225fd</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#93272C</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_silver.xml.fdm_material b/ultimaker_petg_silver.xml.fdm_material
index 094053c75..d9a0d1f95 100644
--- a/ultimaker_petg_silver.xml.fdm_material
+++ b/ultimaker_petg_silver.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Silver</color>
         </name>
         <GUID>40a273c6-0e15-4db5-a278-8eb0b4a9e293</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#a1a1a0</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_transparent.xml.fdm_material b/ultimaker_petg_transparent.xml.fdm_material
index 37a97ab33..4091e357a 100644
--- a/ultimaker_petg_transparent.xml.fdm_material
+++ b/ultimaker_petg_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Transparent</color>
         </name>
         <GUID>7418eca4-e2c4-45b1-a022-37180861fd39</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#d0d0d0</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_white.xml.fdm_material b/ultimaker_petg_white.xml.fdm_material
index ebee44c20..150ef5eb1 100644
--- a/ultimaker_petg_white.xml.fdm_material
+++ b/ultimaker_petg_white.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>61eb5c6c-0110-49de-9756-13b8c7cc2ff1</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#ecece7</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_yellow.xml.fdm_material b/ultimaker_petg_yellow.xml.fdm_material
index 3837a57e7..6a3de0522 100644
--- a/ultimaker_petg_yellow.xml.fdm_material
+++ b/ultimaker_petg_yellow.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Yellow</color>
         </name>
         <GUID>218379df-4a67-4668-b5f8-2a14c92bce96</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#f1dd38</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_petg_yellow_fluorescent.xml.fdm_material b/ultimaker_petg_yellow_fluorescent.xml.fdm_material
index a1b457779..5928f6614 100644
--- a/ultimaker_petg_yellow_fluorescent.xml.fdm_material
+++ b/ultimaker_petg_yellow_fluorescent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Yellow Fluorescent</color>
         </name>
         <GUID>d67a3ccb-6b51-4013-bdac-4c59e952aaf4</GUID>
-        <version>44</version>
+        <version>45</version>
         <color_code>#B1D600</color_code>
         <description>Ultimaker PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -142,6 +142,7 @@
             <setting key="print cooling">50</setting>
             <setting key="heated bed temperature">85</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.2</cura:setting>
            <hotend id="AA 0.25">
                 <setting key="hardware compatible">yes</setting>
diff --git a/ultimaker_pp_transparent.xml.fdm_material b/ultimaker_pp_transparent.xml.fdm_material
index 46179d717..873f50cb7 100644
--- a/ultimaker_pp_transparent.xml.fdm_material
+++ b/ultimaker_pp_transparent.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Natural</color>
         </name>
         <GUID>c7005925-2a41-4280-8cdd-4029e3fe5253</GUID>
-        <version>49</version>
+        <version>50</version>
         <color_code>#d0d0d0</color_code>
         <description>Fatigue and chemical resistant. Polypropylene offers excellent temperature, chemical and fatigue resistance. Its toughness and low friction make it a perfect choice for prototyping and creating durable end-use models.</description>
         <adhesion_info>Adhesion sheets are required.</adhesion_info>
@@ -167,6 +167,7 @@
             <setting key="anti ooze retract position">-14</setting>
             <setting key="break preparation position">-14</setting>
             <setting key="no load move factor">1</setting>
+            <setting key="retraction amount">5</setting>
             <cura:setting key="material_shrinkage_percentage">100.7</cura:setting>
 
             <hotend id="AA 0.25">
diff --git a/ultimaker_tpu.xml.fdm_material b/ultimaker_tpu.xml.fdm_material
index fc56d7577..b1bce8375 100644
--- a/ultimaker_tpu.xml.fdm_material
+++ b/ultimaker_tpu.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color TPU</label>
         </name>
         <GUID>bddeb098-9e1f-4d0b-be9f-e99f6f8277d8</GUID>
-        <version>9</version>
+        <version>10</version>
         <color_code>#B22744</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -148,7 +148,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>
diff --git a/ultimaker_tpu_black.xml.fdm_material b/ultimaker_tpu_black.xml.fdm_material
index 8ad2c16ab..d7459d13a 100644
--- a/ultimaker_tpu_black.xml.fdm_material
+++ b/ultimaker_tpu_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>eff40bcf-588d-420d-a3bc-a5ffd8c7f4b3</GUID>
-        <version>41</version>
+        <version>42</version>
         <color_code>#0e0e10</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -146,7 +146,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>
diff --git a/ultimaker_tpu_blue.xml.fdm_material b/ultimaker_tpu_blue.xml.fdm_material
index f25ef29d8..88b03c685 100644
--- a/ultimaker_tpu_blue.xml.fdm_material
+++ b/ultimaker_tpu_blue.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Blue</color>
         </name>
         <GUID>5f4a826c-7bfe-460f-8650-a9178b180d34</GUID>
-        <version>41</version>
+        <version>42</version>
         <color_code>#00387b</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -146,7 +146,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>
diff --git a/ultimaker_tpu_red.xml.fdm_material b/ultimaker_tpu_red.xml.fdm_material
index 7e828e76a..02e30ddb8 100644
--- a/ultimaker_tpu_red.xml.fdm_material
+++ b/ultimaker_tpu_red.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Red</color>
         </name>
         <GUID>07a4547f-d21f-41a0-8eee-bc92125221b3</GUID>
-        <version>41</version>
+        <version>42</version>
         <color_code>#a63437</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -146,7 +146,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>
diff --git a/ultimaker_tpu_white.xml.fdm_material b/ultimaker_tpu_white.xml.fdm_material
index e6771d7bb..defa5a7bb 100644
--- a/ultimaker_tpu_white.xml.fdm_material
+++ b/ultimaker_tpu_white.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>White</color>
         </name>
         <GUID>6a2573e6-c8ee-4c66-8029-3ebb3d5adc5b</GUID>
-        <version>41</version>
+        <version>42</version>
         <color_code>#f1ece1</color_code>
         <description>Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance.</description>
         <adhesion_info>Use glue.</adhesion_info>
@@ -146,7 +146,7 @@
             <setting key="heated bed temperature">40</setting>
             <setting key="build volume temperature">30</setting>
             <setting key="print cooling">50</setting>
-            <setting key="retraction amount">2</setting>
+            <setting key="retraction amount">5</setting>
             <setting key="break position">-50</setting>
             <setting key="no load move factor">1</setting>
             <cura:setting key="material_shrinkage_percentage">100.3</cura:setting>

From 6bd75b13652b797cb6ad5d7722872d7f6e21ee39 Mon Sep 17 00:00:00 2001
From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com>
Date: Tue, 25 Jun 2024 18:01:04 +0200
Subject: [PATCH 2/2] Added improvements to self support for ASA and ABS-R

PP-490
---
 ultimaker_absr_175.xml.fdm_material | 3 ++-
 ultimaker_asa_175.xml.fdm_material  | 5 ++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/ultimaker_absr_175.xml.fdm_material b/ultimaker_absr_175.xml.fdm_material
index 22d6e9c8b..a6b6566fc 100644
--- a/ultimaker_absr_175.xml.fdm_material
+++ b/ultimaker_absr_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>88c8919c-6a09-471a-b7b6-e801263d862d</GUID>
         <reference_material_id>abs-wss1</reference_material_id>
-        <version>7</version>
+        <version>8</version>
         <color_code>#8cb219</color_code>
         <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
         <adhesion_info>No glue needed</adhesion_info>
@@ -55,6 +55,7 @@
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL" />
             <setting key="build volume temperature">85</setting>
             <setting key="heated bed temperature">95</setting>
+            <cura:setting key="material_bed_temperature_layer_0">100</cura:setting>
             <hotend id="1A">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_asa_175.xml.fdm_material b/ultimaker_asa_175.xml.fdm_material
index d7041e8ad..5414263c5 100644
--- a/ultimaker_asa_175.xml.fdm_material
+++ b/ultimaker_asa_175.xml.fdm_material
@@ -8,7 +8,7 @@
         </name>
         <GUID>f79bc612-21eb-482e-ad6c-87d75bdde066</GUID>
         <reference_material_id>asa</reference_material_id>
-        <version>5</version>
+        <version>6</version>
         <color_code>#f1ece1</color_code>
         <description>ASA combines the qualities of ABS with the added benefit of UV resistance and additional moisture resistance making it ideal for equipment exposed to sunlight and rain over long periods of time – such as products for the agriculture, transportation, and power and utility industries.</description>
         <adhesion_info>No glue needed</adhesion_info>
@@ -31,8 +31,7 @@
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method X" />
             <setting key="print temperature">255</setting>
             <setting key="standby temperature">190</setting>
-            <setting key="build volume temperature">93</setting>
-            <setting key="heated bed temperature">95</setting>
+            <setting key="build volume temperature">107</setting>
             <cura:setting key="material_shrinkage_percentage">100.44</cura:setting>
             <cura:setting key="material_shrinkage_percentage_z">100.6</cura:setting>