emotiontech_pa6gf.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>eMotionTech</brand>
            <material>Nylon</material>
            <color>Generic</color>
			<label>PA6GF</label>
        </name>
        <GUID>5b36a712-ac8b-48a0-b2ee-da3f040e580c</GUID>
        <version>14</version>
        <color_code>#69E2D5</color_code>
        <description> </description>
        <adhesion_info>We recommend the use of 3DLAC applied on a cold glass bed before heating</adhesion_info>
    </metadata>
    <properties>
        <density>1.35</density>
        <diameter>1.75</diameter>
        <weight>500</weight>
    </properties>
    <settings>
        <setting key="print temperature">290</setting>
        <setting key="heated bed temperature">45</setting>
        <setting key="standby temperature">150</setting>
        <setting key="build volume temperature">45</setting>
        <machine>
            <machine_identifier manufacturer="eMotionTech" product="DUAL600"/> 
            <hotend id="Standard 0.4" >
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">290</setting>
                <setting key="retraction amount">2</setting>
            </hotend>
            <hotend id="Standard 0.6" >
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">290</setting>
                <setting key="retraction amount">3</setting>
            </hotend>
            <hotend id="Standard 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">290</setting>
                <setting key="retraction amount">3</setting>
            </hotend>
            <!-- Commented out until eMotionTech adds their hotend profiles to Cura.
            <hotend id="Standard 1.0 Experimental">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">225</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
            <hotend id="Standard 1.2 Experimental">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">245</setting>
                <setting key="retraction amount">1.9</setting>
            </hotend>
            -->
			<hotend id="High temp 0.4" >
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">290</setting>
                <setting key="retraction amount">2</setting>
            </hotend>
        </machine>
        <machine>
            <machine_identifier manufacturer="eMotionTech" product="IDEX420"/>
            <machine_identifier manufacturer="eMotionTech" product="IDEX420 Duplicate"/>
            <machine_identifier manufacturer="eMotionTech" product="IDEX420 Mirror"/>
            <hotend id="IDEX420 Laiton 0.4" >
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="IDEX420 Laiton 0.6" >
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="IDEX420 Laiton 0.8">
                <setting key="hardware compatible">no</setting>
            </hotend>
            <hotend id="IDEX420 Acier Durci 0.4">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">290</setting>
            </hotend>
        </machine>
    </settings>
</fdmmaterial>