Skip to content

Latest commit

 

History

History
373 lines (212 loc) · 12.1 KB

readme.md

File metadata and controls

373 lines (212 loc) · 12.1 KB
Raw

Arduino Matter library

Matter

This library makes using Matter easy and accessible on the Arduino ecosystem.

The supported boards use Matter over Thread. To connect your device you'll need a smart home device which can act as an Open Thread Border Router (OTBR) and provide a gateway between the Thread network and your WiFi.

Supported devices, ecosystems and OTBRs

Supported Arduino boards:

  • Arduino Nano Matter
  • SparkFun Thing Plus Matter
  • Silicon Labs xG24 Explorer Kit
  • Silicon Labs xG24 Dev Kit

Supported Thread Border Routers:

Manufacturer / Ecosystem Device
Google Home Nest Hub Gen2
Apple HomeKit HomePod Gen2, HomePod mini
Amazon Alexa Echo Gen4
Raspberry Pi OTBR Raspberry Pi

Read more on setting up your Raspberry Pi as an OTBR here.

Nano Matter OpenThread RCP

The Arduino Nano Matter can also be used as an USB-OpenThread bridge (RCP - Radio Co-Processor) with a Raspberry Pi OTBR.

To set up your Nano Matter as an OpenThread RCP do the following:

  • Flash the bootloader on your device
  • Flash 'extra/openthread_rcp_nano_matter.hex' on your device
  • Plug in your Nano Matter into your Raspberry Pi via USB
  • Follow the steps in the Raspberry Pi OTBR guide

Supported Matter devices

  • Air quality sensor
  • Contact sensor
  • Door lock
  • Fan
  • Flow measurement
  • Humidity measurement
  • Illuminance measurement
  • On/Off lightbulb
  • Dimmable lightbulb
  • Color lightbulb
  • Occupancy sensor
  • On/Off Plug-in Unit / Outlet
  • Pressure measurement
  • Switch
  • Temperature measurement
  • Thermostat
  • Window covering

Setting up your Arduino device

  • Flash the bootloader to your Arduino board if this is your first time using it

  • Flash your Arduino board with a Matter application/example/sketch

  • Open the Serial Monitor for you board

  • If you device is not commissioned to any Matter network it'll print the link for the QR code and manual code required for pairing

  • If you're using Google's ecosystem you'll need to complete additional setup steps in the Google Home Developer Console.

    This video will guide through the setup process. You can use the same Vendor ID (0xfff1) and Product ID (0x8005) as shown in the video.

    You only need to do this once.

  • Open the smart-home app of your choice on your smartphone (Google Home, Apple Home, Amazon Alexa)

  • Add a new Matter device in the app (if the app asks whether the device you're adding has a Matter logo - say yes)

  • Scan the QR code or enter the manual pin provided by your Arduino

  • Wait for the pairing to finish

  • Congratulations - you successfully paired your Arduino as a Matter device

  • You only need to do this once - pairing persists even after you restart/reflash your device

Note, that an additional Matter Hub device will be added alongside your Matter devices to your smart home environment. This is required to ensure correct operation on Apple and Amazon ecosystems and can be ignored/hidden after the onboarding completes.

Additional info

Unpairing / decommissioning

Matter variants save the network keys and credentials in permanent memory, so you don't have to re-pair them when they're restarted.

If you need to make your device forget the network credentials but you're unable to unpair them from the network - you can erase the chip with it's permanent storage.

You can do this by re-burning the bootloader in the Arduino IDE (Tools > Burn Bootloader). The IDE will perform a full chip erase before re-flashing your bootloader. After this you'll need to upload your sketch again. Your sketch will start with a blank slate prompting you to pair it.

You can use the Matter library as well to unpair your devices from code. See the matter_decommission example for details.

Changing Matter device identities and provisioning data

Some ecosystems (as of now Google) requires each Matter device to have unique identities in order to pair.

We provide a python script for changing the Matter device identities and provisioning data easily.

See the Arduino Matter Provision Tool under 'extra/arduino_matter_provision'.

Arduino Nano Matter - Matter setup guide

You can also refer to Arduino's Matter setup guide for the Nano Matter to get started with your Matter setup. The guide is for the Nano Matter - but most of the contents are applicable to all boards supporting Matter.

API documentation

class Matter

This class manages the global state of Matter, responsible for starting up the endpoint management and for providing the current status and onboarding codes.

The class has the following methods available:

void begin(); Starts Matter and the dynamic endpoint handler on the device. Must be called before calling begin() on any appliance class.

String getManualPairingCode(); Returns the manual pairing code required for onboarding the device on a Matter network.

String getOnboardingQRCodeUrl(); Returns a link to the QR code required for onboarding the device on a Matter network.

String getOnboardingQRCodePayload(); Returns the QR code payload for onboarding the device on a Matter network. Ideal when generating your own QR codes.

bool isDeviceCommissioned(); Returns whether the device has been commissioned to a Matter network.

bool isDeviceThreadConnected(); Returns whether the device is connected to the Thread network.

Appliance classes

Each Matter appliance class has a begin() and an end() function.

begin() must be called to create the endpoint and present it on the Matter network, and to be able to receive and send data through it.

Calling end() will take the appliance offline and destroy it.

Instances of the Matter classes automatically update themselves with the values received from the network - and provide getter functions for the users to obtain their current state.

Users can publish measurement/control data through the Matter classes which will be automatically transmitted through the Matter network.

is_online() can be called on all Matter appliances to check whether they have been discovered on the network by the appropriate client - which is most likely your Matter hub. When this function returns true it means that your appliance is able to communicate with your Matter hub - and therefore it's online.

set_device_change_callback(void (*matter_device_changed_cb)(void)) can be called to set a callback function which will be called when any of the device's properties are changed by the Matter controller.

All appliance classes have the following methods for setting it's custom properties:

void set_device_name(const char* device_name); Sets the name of the device.

void set_vendor_name(const char* vendor_name); Sets the manufacturer/vendor name of the device.

void set_product_name(const char* product_name); Sets the model/product name of the device.

void set_serial_number(const char* serial_number); Sets the serial number of the device.

class MatterAirQuality

void set_air_quality(MatterAirQuality::AirQuality_t value);

MatterAirQuality::AirQuality_t get_air_quality();

class MatterContact

Class for creating and controlling a Matter Contact Sensor appliance.

void set_state(bool value);

bool get_state();

class MatterDoorLock

bool is_locked();

void set_locked(bool locked);

void toggle();

class MatterFan

Class for creating and controlling a Matter Fan appliance.

void set_onoff(bool value);

bool get_onoff();

void set_percent(uint8_t percent);

uint8_t get_percent();

class MatterFlow

Class for creating and controlling a Matter Flow measurement appliance.

void set_measured_value_raw(uint16_t value);

uint16_t get_measured_value_raw();

void set_measured_value_cubic_meters_per_hour(double value);

double get_measured_value_cubic_meters_per_hour();

class MatterHumidity

void set_measured_value_raw(uint16_t value);

void set_measured_value(float value);

void set_measured_value(double value);

uint16_t get_measured_value_raw();

float get_measured_value();

class MatterIlluminance

void set_measured_value_raw(uint16_t value);

void set_measured_value_lux(double lux);

void set_measured_value_lux(float lux);

void set_measured_value_lux(uint16_t lux);

double get_measured_value_lux();

class MatterLightbulb

Class for creating and controlling a Matter Lightbulb appliance.

void set_onoff(bool value);

bool get_onoff();

class MatterDimmableLightbulb

Has all the methods of MatterLightbulb and adds the following:

uint8_t get_brightness();

void set_brightness(uint8_t brightness);

uint8_t get_brightness_percent();

void set_brightness_percent(uint8_t brightness);

class MatterColorLightbulb

Has all the methods of MatterDimmableLightbulb and adds the following:

uint8_t get_hue();

uint8_t get_saturation();

void set_hue(uint8_t hue);

void set_saturation(uint8_t saturation);

uint16_t get_true_hue();

uint8_t get_saturation_percent();

void set_true_hue(uint16_t true_hue);

void set_saturation_percent(uint8_t saturation);

void get_rgb(uint8_t* r, uint8_t* g, uint8_t* b);

void get_rgb_raw(uint8_t* r, uint8_t* g, uint8_t* b);

void set_rgb(uint8_t r, uint8_t g, uint8_t b);

void boost_saturation(uint8_t amount);

class MatterOccupancy

void set_occupancy(bool occupied);

bool get_occupancy();

class MatterOnOffPluginUnit

void set_onoff(bool value);

bool get_onoff();

void toggle();

class MatterPressure

void set_measured_value(int16_t value);

void set_measured_value(float value);

void set_measured_value(double value);

int16_t get_measured_value();

class MatterSwitch

void set_state(bool state);

bool get_state();

class MatterTemperature

void set_measured_value_raw(int16_t value);

void set_measured_value_celsius(float value);

void set_measured_value_celsius(double value);

int16_t get_measured_value_raw();

float get_measured_value_celsius();

class MatterThermostat

int16_t get_local_temperature_raw();

void set_local_temperature_raw(int16_t local_temp);

int16_t get_heating_setpoint_raw();

void set_heating_setpoint_raw(int16_t heating_setpoint);

float get_local_temperature();

void set_local_temperature(float local_temp);

float get_heating_setpoint();

void set_heating_setpoint(float heating_setpoint);

void set_absolute_minimum_heating_setpoint(float abs_min_heating_setpoint);

void set_minimum_heating_setpoint(float min_heating_setpoint);

void set_absolute_maximum_heating_setpoint(float abs_max_heating_setpoint);

void set_maximum_heating_setpoint(float max_heating_setpoint);

float get_absolute_minimum_heating_setpoint();

float get_minimum_heating_setpoint();

float get_absolute_maximum_heating_setpoint();

float get_maximum_heating_setpoint();

thermostat_mode_t get_system_mode();

void set_system_mode(thermostat_mode_t system_mode);

class MatterWindowCovering

void set_current_operation(window_covering_current_operation_t current_operation);

void set_actual_lift_position_raw(uint16_t lift_position);

void set_actual_lift_position_percent(uint8_t lift_position_percent);

uint16_t get_actual_lift_position_raw();

uint8_t get_actual_lift_position_percent();

uint16_t get_requested_lift_position_raw();

uint8_t get_requested_lift_position_percent();