RT-Thread v3.1.5 released

The v3.1.x is the long term support branch in RT-Thread. It's more focused on bug fixed and BSP update.

The following is the change log since RT-Thread v3.1.4.

Kernel

• Fix the issue when block = NULL in rt_mp_free;
• Fix the software issue when the system timer thread is pending
• Fix the timer/software timer handling issue if the timeout function starts/stops/deletes this timer.
• Fix an issue with rt_timer_start being broken and destroying the timer list
• Fix bug of rt_memheap_detach
• Fix the bug that the linked list is still mounted when the single timer is not modified
• Fix the delay_until issue
• Add mb mq value overflow-check code
• Fix the rt_event_recv function, if the event met without blocking, assigning thread->event_set/event_info will goes well
• Add the definition of the maximum value of ipc type
• Fix the delay_until issue
• fixed __rt_ffs bug on account of armclang LTO.
• fixed rt_timer_list_next_timeout multi-task safe
• fix the software issue when the system timer thread pending.
• Fix the timer/software timer handling issue if the timeout function starts/stops/deletes this timer.
• The cleanup operation is executed before the current thread exits
• Modify cleanup to resolve the issue of unable to free memory and communication between threads
• Fix double release for thread
• Fix thread control bug about RT_THREAD_CTRL_CLOSE command
• Fix the issue of critical protection when rt_thread_delete change the status of thread;
• Fix bug in rt_realloc of mem.c, which may cause memory leak
• Use object_find to implement thread_find/device_find
• fix the timer code depends on c99

Components

• Change rt_data_queue_peak to rt_data_queue_peek.
• Add rt_data_queue_deinit and fix bug of dataqueue
• Solve the issue that the do_pollfd function processing the underlying network device returns error -1
• Fix the issue that when the network card device calls to close dhcp, the bottom layer no need to call the dhcp_stop function to close dhcp
• Modify the spelling error of the macro definition, modify the printing error when printing the IMEI number
• Fix the issue that the server closed the connection when web socket requests the data that comes back from the server, and the socket status is incorrectly judged at that point
• Fix the issue of incorrect sal_getaddrinfo release when sal socket supports multiple network cards
• Adjust where the AT socket callback function
• Fix at_client, avoid creating the same client repeatedly and prevent working exceptions and memory leaks.
• Fix the bug that rx_notice out of sync when the data is received after last rt_device_read() is zero
• Change the header file included in some libc files from <rtthread.h> to <rtconfig.h> to narrow the scope of inclusion to prevent recursive compilation
• [jffs2] modify the error check of rt_event_recv()
• [audio] Fix compile warning, undefine var, and fixed re-include of audio
• [serial] Fix the crash caused when the serial port receiving buffer is full and ULOG_USING_ISR_LOG is not turned on
• [spi] Fix "response+1" causing hard fault of unaligned access to SPI memory of STM32 HAL library
• [hwtimer] When getting the timer count, prevent overflow update due to the interruption
• [dirver/i2c] i2c driver supports bus lock, STOP control
• [usb] Fix bug in device descriptor that MAC OS enumeration failed
• Fix the bug that USB cannot recognize composite device normally
• Fix USB host core bugs
  • Limit >4 USB ports hubs
  • Double free intf
  • dname buffer size is too small
  • Reset child pointer after detaching instance
• remove jffs
• remove uffs

BSP and CPU porting

• Add license info and code cleanup for vexpress-a9 BSP
• Fix spelling mistakes of code
• [allwinner_tina]Fix spi driver bug
• Optimize BSP dist handle process
• fixed a bug that caused system crash by changing the run_mode in low power mode
• drv_flash_f7.c supports single bank mode
• Optimize the pin-index algorithm for stm32
• Fix the clock configuration issue of STM32 hardware timer
• Adjust the interrupt priority configuration of some peripherals of the STM32 series BSP
• Fix stm32 f1 series rtc bug
• Fix PWM timer init about pwm
• remove zynq7000
• delete stm32f20x/fh8620/gkipc/realview-a8
• update sam7x/simulator/qemu-vexpress-a9/imx6ul
• add Copyright_Notice.md

Tools

• Fixed python 2.x cmp
• Rename GCC_VERSION to GCC_VERSION_STR
• Optimize project group sort by name
• Improve the logic of generating rtconfig.h files in scons with command scons --menuconfig
• Fixed an issue that *.s src files couldn't be compiled
• Fixed c99/siginfo_t issue caused by gcc_version

RT-Thread v4.0.3 released

Change log since v4.0.2

Kernel

• Add __RTTHREAD__ global macro definition
• Add user heap options
• Fix bug of rt_memheap_detach
• Add rt_memory_info() for memheap.c
• Add rt_object_get_length/rt_object_get_pointers APIs
• Fix double release for thread
• Fix thread control bug about RT_THREAD_CTRL_CLOSE command
• Avoid deadlock (rt_hw_interrupt_disable and rt_enter_critical when enable smp)
• Fix the issue of judging the ready_table of pcpu when multi-core rt_schedule_remove_thread
• Fix the issue that the yield operation cannot release the cpu in time
• Fix the iterator failure for softtimer list timeout check
• Fix rt_timer_list_next_timeout multi-task safe
• Add timer working status query function to software timer
• Fix the software issue when the system timer thread is pending
• Fix the timer/software timer handling issue if the timeout function starts/stops/deletes this timer.
• Fix an issue with rt_timer_start being broken and destroying the timer list
• Fix the bug that the linked list is still mounted when the single timer is not modified
• Add function rt_tick_get_millisecond()
• Fix the delay_until issue
• Add mb mq value overflow-check code
• Fix the rt_event_recv function, if the event met without blocking, assigning thread->event_set/event_info will goes well
• Add the definition of the maximum value of ipc type
• Remove the call of rt_system_object_init/rt_system_tick_init from the code.
• Removes component configuration macro RT_USING_FINSH from the kernel
• Use object_find to implement thread_find/device_find
• The cleanup operation is executed before the current thread exits

Components

• Fix assert in the sys_arch_mbox_fetch function when close socket
• Add dhcp start or stop function to start or stop dhcp.
• Change rt_data_queue_peak to rt_data_queue_peek.
• Update elmfat to R0.14 patch 1.
• Add SAL_INTERNET_CHECK configuration item to support turning on or off the network status check
• Solve the issue that the do_pollfd function processing the underlying network device returns error -1
• Fix the issue that when the network card device calls to close dhcp, the bottom layer no need to call the dhcp_stop function to close dhcp
• Add the function of judging the network card up and down in the sal_accept function
• Modify the spelling error of the macro definition, modify the printing error when printing the IMEI number
• Fix the issue that the server closed the connection when web socket requests the data that comes back from the server, and the socket status is incorrectly judged at that point
• Fix the issue of incorrect sal_getaddrinfo release when sal socket supports multiple network cards
• Update AT socket
  • Support alloc socket dynamically with at device
  • Update AT_SW_VERSION and adjust at_socket_ops
  • Adjust where the AT socket callback function
  • Fix at_client, avoid creating the same client repeatedly and prevent working exceptions and memory leaks.
  • Fix the bug that rx_notice out of sync when the data is received after last rt_device_read() is zero
• [FinSH] rm command supports recursive deletion of folders
• Add clear command for FINSH
• [posix] Implement usleep function
• Fix the issue of pthreads compilation error when using the new version of newlib; at the same time solve the problem of pthreads under 64-bit;
• [dlmodule] Fix crash when dlmodule exits
• Add priority & stack_size param parsing for dlmodule
• libc adds getline/getdelim functions
• Change the header file included in some libc files from <rtthread.h> to <rtconfig.h> to narrow the scope of inclusion to prevent recursive compilation
• [jffs2] error check of rt_event_recv()
• Add rt_data_queue_deinit and fix bug of dataqueue
• Change log in device driver framework
  • [pin] Add rt_pin_get to pin frame
  • [PM] Update RT-Thread PM2.0 framework
  • [audio] Fix compile warning, undefine var
  • [serial] Fix the crash caused when the serial port receiving buffer is full and ULOG_USING_ISR_LOG is not turned on
  • [wlan] Add raw frame send interface and Management frame filter interface
  • [Sensor] Add vendor info and sensor types for cmd
  • [Sensor] Support custom commands for rt_sensor_control
  • [sensor] Support TOF sensor class
  • [SFUD] Update the 'sf bench' command.
  • [spi] Fix "response+1" causing hard fault of unaligned access to SPI memory of STM32 HAL library
  • [RTC] Optimize RTC alarm function, add alarm function for SOFT_RTC
  • [hwtimer] When getting the timer count, prevent overflow update due to the interruption
  • [dirver/i2c] i2c driver supports bus lock, STOP control
  • [usb] Fix bug in device descriptor that MAC OS enumeration failed
  • Fix the bug that USB cannot recognize composite device normally
  • Fix USB host core bugs
    • Limit >4 USB ports hubs
    • Double free intf
    • dname buffer size is too small
    • Reset child pointer after detaching instance

BSP and CPU porting

• Add license info and code cleanup for vexpress-a9 BSP

• Add HDSC hc32f4a0 BSP support

• Add support for Cypress PSoC6 series products

• Fix the lpc55 issue under Linux/GCC

• [qemu] Fix spelling mistakes of code in drv_pl041.c

• [loongson] Update the SPI driver and UART driver on the Loongson 2K1000 platform

• [allwinner_tina]Fix spi driver bug

• [smartfusion2]Support Microsemi SmartFusion2 family FPGA

• [imxrt] Add ethernet configuration for imxrt1064-nxp-evk

• Add support for architecture sparc-v8 and soc bm3803.

• [libc] libc adds getline/getdelim functions (posix.1-2008)

• Add support for c28x mcu hardware fpu

• [at32] Add link detecting thread for ethernet driver

• Fix gcc assembly option in rtconfig.py for imxrt1064-nxp-evk

• [IMXRT]Fix scons --dist in IMXRT BSP

• [ls2kdev] Initial gpio driver without irq support on ls2kdev

• Optimize BSP dist handle process

• [nrfx] Add the qspi_flash of nordic pdk

• [nrf5x] Add the BSP of nrf5x, which support UART, SPI, PWM, ADC, i2c drivers and rtc device driver

• [nrfx] Add the on-chip flash for nrf5x

• [RISC-V:K210]Add UART1~3 support for K210

• [Nuclei] Add Nuclei RISC-V Processor support

• Update BSP for mini2440

• Add soc timer cntpct

• LPC55S69: Add NS project and TFM support on LPC55S69

• Make MicroPython runs on Raspi3-64 BSP

• Add rt_hw_us_delay for W60x

• [imxrt] [driver] Add usb device driver

• Fix raspi4-32

  • Add: dma driver, bsc driver, dsi lcd/touch driver, waveshare spi lcd/touch driver, watchdog driver, hdmi driver, sdio driver, gpio interrupt
  • Fix: eth driver, spi driver, uart driver

• Add more BSP on BSP framework:

  • At32/at32f403a-start
  • At32/at32f407-start
  • bluetrum/ab32vg1-ab-prougen
  • bm3803
  • cypress/psoc6-pioneerkit_modus
  • essemi/es32f0271
  • essemi/es32f369x
  • essemi/es32f0654
  • lpc55sxx/lpc55s69_nxp_evk_ns
  • ls2kdev
  • nrf5x
  • nuclei/gd32vf103_rvstar
  • nuclei/hbird_eval
  • nuvoton/nk-980iot
  • nuvoton/numaker-iot-m487
  • nuvoton/numaker-pfm-m487
  • raspi2
  • raspi3-32
  • raspi3-64
  • raspi4-32
  • raspi4-64
  • smartfusion2
  • thead-smart
  • tm4c123 BSP
  • zynqmp-r5-axu4ev

• Add more STM32 BSP based on new STM32 BSP framework:

  • STM32L431-BearPi
  • stm32f103-blue-pill
  • stm32f103-onenet-nbiot
  • stm32f410-st-nucleo
  • stm32f411-atk-nano
  • stm32f413-st-nucleo
  • stm32g070-st-nucleo
  • stm32h747-st-discovery
  • stm32l010-st-nucleo
  • stm32l412-st-nucleo
  • stm32l433-st-nucleo
  • stm32l496-st-nucleo
  • stm32mp157a-st-discovery
  • stm32mp157a-st-ev1
  • stm32wb55-st-nucleo

• New STM32 BSP framework:

  • Add dcmi, ov2640 and SD Card driver for stm32h743
  • Fix bug that caused system crash by changing the run_mode in low power mode
  • Fix issue when using gcc to compile the chips of stm G4 series, but chip doesn't work
  • drv_flash_f7.c supports single bank mode
  • Add stm32f103-atk-warshipv3 sram driver
  • Update void HAL_Delay(__IO uint32_t Delay)
  • Add PWM9_CONFIG default configuration and TIM3_CONFIG default configuration
  • [stm32f103-atk-warshipv3] Add sdcard driver
  • Add English readme for stm32
  • Add dac and can driver for stm32l4 and stm32f4
  • openamp driver and add rs485 driver for stm32mp157a
  • Optimize the pin-index algorithm
  • [stm32f769-disco] Support ethernet device
  • Add C++ Support
  • Fix the clock configuration issue of STM32 hardware timer
  • Adjust the interrupt priority configuration of some peripherals of the STM32 series BSP
  • Fix stm32 f1 series rtc bug
  • Support SPI/ADC/TIME on-chip peripheral driver
  • [stm32h743-atk-apollo]Support stm32h7 uart dma
  • Add stm32h743-atk-apollo support for pcf8574 and uart2
  • Support stm32h743-atk-apollo pcf8574 and uart2(485)
  • Update bsp/stm32/stm32h743-st-nucleo
  • Fix ADC channel Configuration bug for SMT32F0/L0/H7
  • Add support for onboard AP6181
  • Fix UART DMA TX
  • Add pm support by cubemx tool for stm32l4
  • Add stm32f407-atk-explorer sram driver
  • Fix PWM timer init about pwm
  • [stm32f103-atk-warshipv3]Add sdcard driver
  • Add stm32f103-atk-warshipv3 sram driver

Tools

• Add C++ support for eclipse target
• Keep user's lib configuration while running --target=eclipse
• Add Libraries when perform scons --dist
• Update tools/building.py and add tackanalysis option
• Improve the logic of generating rtconfig.h files in scons with command scons --menuconfig
• Fix makeimg.py wrong on linux
• Add Studio IDE dist feature for stm32 BSP

RT-Thread v3.1.4 released

The v3.1.x is the long term support branch in RT-Thread. It's more focused on bug fixed and BSP update.

The following is the change log since RT-Thread v3.1.3.

Kernel

• Split the component automatic initialization to component automatic initialization and main funciton;
• Fix RT_IDLE_HOOK spelling issue;
• Add thread waiting for message queue when queue is full;
• Fix the issue of delete mq in rt_mq_create in some abnormal case;
• Remove the C++ keywords in thert_console_set_devicefunction;
• Remove the suspend_thread_count member from memory_pool structure;
• Fix the issue when block = NULL in rt_mp_free;
• Fix the issue of critical protection when rt_thread_delete change the status of thread;

Components

• Fix the issue of mPool size in C++ / Queue;
• Add the error status return in C++ / Thread task join/wait function;
• Fix compilation warning in DFS/ELM FatFS;
• Add support for Linux NFS Server in DFS/NFS;
• Fix mkfs issue in DFS/UFFS;
• Add ftruncate, flock, getuid, umask APIs;
• Fix the display issue of fd with offset in list_fd command;
• Add dfs_mount_device API to mount a file system on a device which is already in mount_table;
• Rename the C++ keywords in DFS/rename function;
• Connnect dfs/poll, select with RT_USING_POSIX in Kconfig;
• Optimize the part of the code of finsh to make it more simple;
• When RT_USING_DEVICE is not used, finsh can use the rt_hw_console_getchar() function which is simple to implement and not using the device framework;
• Increase the line length of the finsh shell to more than 256 characters;
• utest can support clang compiler and C++ compiler;
• Fix possible cross-boundary issues in ulog;
• Fix compilation warning in ulog/ulog_console_backend_output;
• Add support for file sending and receiving feature in YModem;
• CRC16 can be calculated without the lookup talbe to reduce code size in YModem component;
• Fix the issue that stack may be wrongly released during pthread/destory;
• Fix the possible memory leaks issue which caused by pthread_create abnormal case;
• The timer-related APIs under different compiler of libc are moved to the libc\compilers\common folder;
• Remove redundant definitions in dlib/sys/unistd.h (which will cause compilation warnings);
• Add sys/errno.h andsys/signal.h header files under dlib;
• Freemodbus is no longer in the kernel, and split it as a standalone softwre package;
• AT socket updated to v1.3.0:
  • Add multi-client and multi-device function support in AT Socket, and improve the dirty data handling when AT device hardware module reboot;
  • Support netdev network card feature, which can manage and control AT device network connection through the network card interface;
• Improve AT Server function support in AT components, add AT Server data sending and receiving interfaces at_server_send () and at_server_recv ();
• Fix the issue of closesocket() in SAL component when socket closing failure after shutdown();
• Improve sal_bind () network card binding related function in SAL component;
• Add IPV6 related options configuration and function support to SAL and netdev;
• Improve ping command error handling and log display in the netdev;
• Add hostname configuration options and functions in lwIP component;
• Fix the assertion issue of sys_arch_mbox_fetch() in lwIP which may occur when a socket is closed;
• Add network card uninstallation function and support for dhcpd service stop function to the lwip component;
• Fix lwIP component compilation failure caused by closing FinSH component;
• Fix the issue that the socket may not be closed during the DHCPD task in the lwIP DHCP server;
• Add dhcpd_stop() interface;
• Change log in device driver framework:
  • Refactor audio driver framework;
  • Fix the issue that the receiving length is 0 in CAN and the issue of returning wrong values;
  • Add hardware encryption and decryption driver framework;
  • Fix the flag handling issue of rt_i2c_master_send/rt_i2c_master_recv;
  • Add input capture and pulse encoding driver framework;
  • Fix the issue that partition lock is deleted when rt_mmcsd_blk_remove;
  • Fix the issue that the enumerated capacity of the large-capacity card in MMC/SD exceeded the data range;
  • When the SDIO device is initialized, the function's manufacturer and product can also use the information in CIS;
  • Improve the interrupt mode handling in the sensor framework, and fix the issue that the memory is not released when registering the sensor;
  • More information are provided in command line of sensor framework;
  • Add the checking for Rx buffer size in the serial port framework, and provide a notification when RX buffer full;
  • Remove the old Nor SPI Flash driver in SPI framework, and replace with SFUD component;
  • Fix some judgements issue in the return value of SFUD;
  • Fix the definition warning of SFUD_FLASH_DEVICE_TABLE in SFUD;
  • Add support for W25Q64DW devices in SFUD;
  • Fix FiFo creation failure handling when creating a pipe;
  • Fix the issue of releasing RBB in advance in rt_rbb_destroy() function;
  • Rename the new keyword using of C++ in rt_rbb_blk_alloc function;
  • Unify the struct rt_delayed_work in workqueue to struct rt_work;
  • Add touch driver framework;
  • Add USB Audio class;
  • Fix RNDIS plug-in/out issue in USB device stack;
  • Add the interface callback function in USB device stack;
  • Improve wlan framework, including command line functions, handling of AP name, password length, support for netdev, better configurability, etc.

BSP and CPU porting

• Add Clang compiler support in ARM-related CPU porting;
• Fix SCB_AIRCR definition issue in ARM Cortex-M0;
• Unify the .data .bss section to 8bytes alignment in GCC tool chain;
• Rerange NXP i.MXRT BSP and add related BSP documents;
• Add i.MXRT1052 ATK Commander, Fire Pro BSP and i.MXRT1064 EVK BSP to the new i.MXRT BSP;
• Fix I2C operation (master_xfer) in LPC54114-lite BSP;
• Add Audio driver in LPC54114-lite BSP;
• Refactor qemu-vexpress-a9's Audio driver and fix the issue of OS Tick accuracy;
• Remove old STM32 BSP: stm32f4xx-HAL, stm32f10x, stm32f10x-HAL, stm32f429-apollo, stm32f429-disco, stm32h743-nucleo;
• Fix the issue of rt_hw_sci_init() for opening the global interrupt in tms320f28379d BSP;
• Add support of soft I2C and hardware encryption module to WinnerMicro W60x BSP（AES/DES/3DES/RC/SHA1/MD3/CRC);
• Add oneshot WiFi configuration support in WinnerMicro W60x BSP;
• Add more STM32 BSP based on new STM32 BSP framework:
  • stm32f072-st-nucleo
  • stm32f103-gizwits-gokitv21
  • stm32f103-yf-ufun
  • stm32f412-st-nucleo
  • stm32f427-robomaster-a
  • stm32f429-st-disco
  • stm32f769-st-disco
  • stm32g431-st-nucleo
  • stm32h743-st-nucleo
  • stm32h750-armfly-h7-tool
  • stm32l4r5-st-nucleo
  • stm32l452-st-nucleo
• For the new STM32 BSP framework:
  • Add DMAMUX support to stm32l4+;
  • Update F7 HAL library SConscript;
  • Open the SWD port configuration on cubemx in stm32f103-atk-warshipv3 BSP;
  • Add support for SD card in stm32f427-robomaster-a BSP;
  • Add USBFS driver to stm32f412-nucleo BSP;
  • Remove use of device user data on uart driver;
  • Add QSPI FLASH support in stm32h743-atk-apollo BSP;
  • Optimized Ethernet driver;
  • Add hardware encryption and decryption driver;
  • Add MIPI LCD driver;
  • Add pulse encoding driver;
  • Optimize hardware timer driver;
  • Add support for UART 7/8 in serial driver;
  • Optimize WDT driver;

Tools

• Optimize scons script for eclipse in order to generate eclipse project better;
• Improve rtconfig.h generator, PATH type configuration can be generated correctly;
• Fix gcc path detection issue when using the default cross toolchain of the Linux distribution;

RT-Thread v4.0.2 released.

Changelog since v4.0.1

Kernel

• Split the component automatic initialization into component automatic initialization and main funciton;
• Add spin lock API in SMP mode;
• Fix RT_IDLE_HOOK spelling issue;
• Add thread waiting for message queue when queue is full;
• Fix the issue of delete mq in rt_mq_create in some abnormal case;
• Remove the C++ keywords in thert_console_set_devicefunction;
• Remove the suspend_thread_count member from memory_pool structure;
• Fix the issue when block = NULL in rt_mp_free;
• Fix the issue of incorrect scheduling task sequence caused by rt_thread_yeild in system scheduling;
• Fix the issue that the interrupt is opened too late and cause the signal handling delayed;
• When disable SMP, cpu.c will not be added into project by default;
• Fix the issue that rt_thread_exit turned on the interrupt prematurely in the SMP mode, so other cores might delete this task, causing the issue in subsequent function stacks;
• Fix the issue of critical protection when rt_thread_delete change the status of thread;

Components

• Fix the issue of mPool size in C++ / Queue;
• Add the error status return in C++ / Thread task join/wait function;
• Fix compilation warning in DFS/ELM FatFS;
• Add support for Linux NFS Server in DFS/NFS;
• Fix mkfs issue in DFS/UFFS;
• Add ftruncate, flock, getuid, umask APIs;
• Fix the display issue of fd with offset in list_fd command;
• Add dfs_mount_device API to mount a file system on a device which is already in mount_table;
• Rename the C++ keywords in DFS/rename function;
• Connnect dfs/poll, select with RT_USING_POSIX in Kconfig;
• Optimize the part of the code of finsh to make it more simple;
• When RT_USING_DEVICE is not used, finsh can use the rt_hw_console_getchar() function which is simple to implement and not using the device framework;
• Increase the line length of the finsh shell to more than 256 characters;
• utest can support clang compiler and C++ compiler;
• Fix possible cross-boundary issues in ulog;
• Fix compilation warning in ulog/ulog_console_backend_output;
• Add support for file sending and receiving feature in YModem;
• CRC16 can be calculated without the lookup talbe to reduce code size in YModem component;
• Fix the issue that stack may be wrongly released during pthread/destory;
• Fix the possible memory leaks issue which caused by pthread_create abnormal case;
• The timer-related APIs under different compiler of libc are moved to the libc\compilers\common folder;
• Remove redundant definitions in dlib/sys/unistd.h (which will cause compilation warnings);
• Add sys/errno.h andsys/signal.h header files under dlib;
• Freemodbus is no longer in the kernel, and split it as a standalone softwre package;
• AT socket updated to v1.3.0:
  • Add multi-client and multi-device function support in AT Socket, and improve the dirty data handling when AT device hardware module reboot;
  • Support netdev network card feature, which can manage and control AT device network connection through the network card interface;
• Improve AT Server function support in AT components, add AT Server data sending and receiving interfaces at_server_send () and at_server_recv ();
• Fix the issue of closesocket() in SAL component when socket closing failure after shutdown();
• Improve sal_bind () network card binding related function in SAL component;
• Add IPV6 related options configuration and function support to SAL and netdev;
• Improve ping command error handling and log display in the netdev;
• Add hostname configuration options and functions in lwIP component;
• Fix the assertion issue of sys_arch_mbox_fetch() in lwIP which may occur when a socket is closed;
• Add network card uninstallation function and support for dhcpd service stop function to the lwip component;
• Fix lwIP component compilation failure caused by closing FinSH component;
• Fix the issue that the socket may not be closed during the DHCPD task in the lwIP DHCP server;
• Add dhcpd_stop() interface;
• Change log in device driver framework:
  • Refactor audio driver framework;
  • Fix the issue that the receiving length is 0 in CAN and the issue of returning wrong values;
  • Add hardware encryption and decryption driver framework;
  • Fix the flag handling issue of rt_i2c_master_send/rt_i2c_master_recv;
  • Add input capture and pulse encoding driver framework;
  • Fix the issue that partition lock is deleted when rt_mmcsd_blk_remove;
  • Fix the issue that the enumerated capacity of the large-capacity card in MMC/SD exceeded the data range;
  • When the SDIO device is initialized, the function's manufacturer and product can also use the information in CIS;
  • Improve the interrupt mode handling in the sensor framework, and fix the issue that the memory is not released when registering the sensor;
  • More information are provided in command line of sensor framework;
  • Add the checking for Rx buffer size in the serial port framework, and provide a notification when RX buffer full;
  • Remove the old Nor SPI Flash driver in SPI framework, and replace with SFUD component;
  • Fix some judgements issue in the return value of SFUD;
  • Fix the definition warning of SFUD_FLASH_DEVICE_TABLE in SFUD;
  • Add support for W25Q64DW devices in SFUD;
  • Fix FiFo creation failure handling when creating a pipe;
  • Fix the issue of releasing RBB in advance in rt_rbb_destroy() function;
  • Rename the new keyword using of C++ in rt_rbb_blk_alloc function;
  • Unify the struct rt_delayed_work in workqueue to struct rt_work;
  • Add touch driver framework;
  • Add USB Audio class;
  • Fix RNDIS plug-in/out issue in USB device stack;
  • Add the interface callback function in USB device stack;
  • Improve wlan framework, including command line functions, handling of AP name, password length, support for netdev, better configurability, etc.

BSP and CPU porting

• Add Clang compiler support in ARM-related CPU porting;
• Fix SCB_AIRCR definition issue in ARM Cortex-M0;
• Add ARM Cortex-M33 porting;
• Add DMB/DSB related operations for cache operations in ARM Cortex-A porting;
• Add FPU support in ARM Cortex-A porting;
• Re-organize MIPS port. And XBurst related porting are moved to X1000 BSP;
• The porting of loongson 1B and 1C CPU are combined into one GS232 porting;
• Add support for RISC-V Hummingbird processor porting;
• The context switch exit operation of risc-v is forced back to machine mode;
• Fix the issue of switch interruption during TI C28x DSP porting;
• Add _ffs like implementation in the TI C28x DSP porting;
• Unify the .data .bss section to 8bytes alignment in GCC tool chain;
• The es32f0334 BSP is moved to bsp/essemi/es32f0334;
• Add bsp/essemi/es8p508x BSP, including UART and GPIO drivers;
• Add GD32VF103V-EVAL (RISC-V MCU) BSP, including UART driver;
• Rerange NXP i.MXRT BSP and add related BSP documents;
• Add i.MXRT1052 ATK Commander, Fire Pro BSP and i.MXRT1064 EVK BSP to the new i.MXRT BSP;
• Add BSP for NXP LPC55S6X series, and increase support for NXP official development board LPC55S69-EVK;
• Fix I2C operation (master_xfer) in LPC54114-lite BSP;
• Add Audio driver in LPC54114-lite BSP;
• Update Loongson 1B BSP and use automatic component initialization in default;
• Add Kconfig configuration for Loongson 1B BSP;
• Add QEMU/mipssim BSP for simulate RT-Thread/MIPS without MIPS hardware;
• Refactor qemu-vexpress-a9's Audio driver and fix the issue of OS Tick accuracy;
• Add LPUART driver to RV32M1 VEGA BSP;
• Remove old STM32 BSP: stm32f4xx-HAL, stm32f10x, stm32f10x-HAL, stm32f429-apollo, stm32f429-disco, stm32h743-nucleo;
• Fix the issue of rt_hw_sci_init() for opening the global interrupt in tms320f28379d BSP;
• Add support of soft I2C and hardware encryption module to WinnerMicro W60x BSP（AES/DES/3DES/RC/SHA1/MD3/CRC);
• Add oneshot WiFi configuration support in WinnerMicro W60x BSP;
• Add more STM32 BSP based on new STM32 BSP framework:
  • stm32f072-st-nucleo
  • stm32f103-gizwits-gokitv21
  • stm32f103-yf-ufun
  • stm32f412-st-nucleo
  • stm32f427-robomaster-a
  • stm32f429-st-disco
  • stm32f769-st-disco
  • stm32g431-st-nucleo
  • stm32h743-st-nucleo
  • stm32h750-armfly-h7-tool
  • stm32l4r5-st-nucleo
  • stm32l452-st-nucleo
• For the new STM32 BSP framework:
  • Add DMAMUX support to stm32l4+;
  • Update F7 HAL library SConscript;
  • Open the SWD port configuration on cubemx in stm32f103-atk-warshipv3 BSP;
  • Add support for SD card in stm32f427-robomaster-a BSP;
  • Add USBFS driver to stm32f412-nucleo BSP;
  • Remove use of device user data on uart driver;
  • Add QSPI FLASH support in stm32h743-atk-apollo BSP;
  • Optimized Ethernet driver;
  • Add hardware encryption and decryption driver;
  • Add MIPI LCD driver;
  • Add pulse encoding driver;
  • Optimize hardware timer driver;
  • Add support for UART 7/8 in serial driver;
  • Optimize WDT driver;

Tools

• Optimize scons script for eclipse in order to generate eclipse project better;
• Improve rtconfig.h generator, PATH type configuration can be generated correctly;
• Fix gcc path detection issue when using the default cross toolchain of the Linux distribution;

RT-Thread v3.1.3 released

RT-Thread v3.1.3 Released

The v3.1.x is the long term support branch in RT-Thread. It's more focused on bug fixed and BSP update.

The following is the change log since RT-Thread v3.1.2.

Kernel

• Fix the rt_tick_from_millisecond() compilation warning issue;
• Fix the issue that the system object is not detached when handling defunct threads.
• Add the value checking of semaphore (the maximum value of semaphore is up to 65535)
• Add the checking and assertion of re-initialization of object.
• In the rt_enter_critical/rt_exit_critical function, add the checking of whether scheduler is startup or not.
• Fix the definition issue of ENOTSUP in libc_errno.h.
• Simplify the rtdbg.h file and use ulog to make log/debug system easier to use.
• Add the configuration of RT_USING_ARCH_DATA_TYPE, rt_int8_t/.../rt_uint32_t and other basic data types can be defined by BSP itself. (It is recommended to put them into the rtconfig_project.h file, so that this file can be automatically included in rtconfig.h when menuconfig generates it.)
• Add RT_Device_Class_Sensor type devices;
• In the case of single core, the definition of rt_hw_spin_lock/rt_hw_spin_unlock is redefined as the disable/enable interrupt.
• Add the rt_strnlen() function in kservice.c.
• Support the long long type in rt_kprintf (HubertXie);

Components

• Remove CMSIS and move to software package as CMSIS package.
• Remove logtrace component. The system log system switches to ulog;
• Add more code to support AC6 tool chain in some BSP and components;
• In DFS file system component, clean up the log and fix the mkfs issue when index may be out of range.
• Split the running mode from sleep mode in power management, and the frequency change should be clearer. Power management is not use idle hook but execute the sleep action in idle thread directly. (How to use power management, please visit programming document for details)
• Cleanup the log of MMC/SD driver framework;
• Rewrite Sensor Framework, replace the original C++ implementation with C version, and add some corresponding sensor software packages; To use the sensor packages, please use this release;
• Add the DMA transmission operation in the serial driver framework;
• Add the consistency protection to tc_flush routine of serial driver (loogg).
• Add rt_sfud_flash_find_by_dev_name API in SFUD.
• When the Pipe device closed, if it is an unnamed Pipe device and the open count is 0, this Pipe device will be deleted.
• The delayed work implementation is added to workqueue, and the workqueue of the system is added as an option.
• Fix the data loss issue when using DMA transmission in USB CDC.
• Change the return type of finsh_getchar to int;
• Fix the errno issue in newlib/GCC tool chain.
• Change the management of pthreads to POSIX thread array instead of mapping pthread_t directly to rt_thread_t; Change the fields definition more similar with newlib/glibc in pthreads.
• Fix the thread name output in ulog.
• Add loop parameter in utest, then executes test cases repeatedly; Add thread parameter in utest to execute testcase in a new thread.
• Add delay in handshake phase to protect incomplete data reception in YModem component.
• Add netdev component, abstract netdev concept, used to management and control network interface device, and provide netdev operation commands, including ping/ifconfig/dns/netstat etc;
• Modify SAL for netdev, that is, adds the judgment of netdev status and information when the socket creating and data transmitting;
• Add options and types for UDP multicast traffic handling and IPPROTO_IP in SAL;
• Fix ioctl() function not support to control socketfd issues in SAL;
• Improve error log processing in AT socket;
• Fix serial receive data failed issues when AT client initialization is not completed;

BSP

• Add IMXRT1021-EVK BSP (NXP provides maintenance and support);
• Add the ETH hardware checksum option in IMXRT1052 ETH driver;
• Cleanup the LPC 4088 BSP to use main function entry and support menuconfig;
• The double Frame Buffer mechanism and touch screen driver are added in Godson 1C BSP, then it can better to support Persimmon UI (sundm75).
• Add watchdog driver in Godson 1C BSP(sundm75);
• Fix the SysTick interrupt handling issue in nRF52832 and add menuconfig configuration file.
• Add QSPI and SPI flash driver to Nuvoton M487 BSP (bluebear 233)
• Change the CPU porting to libcpu/arm/cortex-a folder in QEMU-VExpress A9/IMX6UL BSP;
• In QEMU-VExpress A9 BSP, the MAC address associated with the local MAC address is used for a unified MAC address in the network.
• remove stm32f0x, stm32f7-disco, stm32f107, stm32f40x, stm32l072, stm32l475-iot-disco, stm32l476-nucleo BSP (when the new STM32 BSP can completely replace these old BSP, these BSP will be removed);
• For the new STM32 BSP:
  • Add CAN driver (ylz0923)
  • Add CAN driver to stm32f103-fire-arbitrary (ylz0923)
  • stm32f746-st-disco with LCD, watchdog, SDCard, ethernet, Flash and other drivers (Jinsheng)
• More board support is added to the new STM32 BSP:
  • stm32f103-atk-warship V3 ATK Warship V3 (daizhiwang)
  • STm32f103-dofly-M3S Dofly STM32F103 Development Board
  • stm32f103-mini-system, the minimum system board for STM32F103 (daizhiwang)
  • stm32f401-st-nucleo
  • stm32f405-smdz-breadfruit sanmu electronic stm32405 development board (sunlichao)
  • stm32f469-st-disco
  • stm32h743-atk-apollo (whj4674672)
  • stm32l4r9-st-eval
  • stm32l053-st-nucleo (sun_shine)
  • stm32l475-st-discovery
  • stm32l476-st-nucleo (Vincent-VG)
  • stm32l496-ali-developer
• The SCI driver is added to the TMS320F28379D BSP (xuzuoyi).
• Add W60X Wi-Fi SoC chip BSP from Winner Microelectronics Co.,Ltd. (Winner Micro and RealThread provide maintenance and support);
• Fix the UART2 IO configuration issue in X1000 UART driver (Zhou Yanjie);
• Cleanup the libcpu/arm/cortex-a code;
• The _rt_hw_context_switch_interrupt/_rt_hw_context_switch is separated in TI DSP TMS320F28379D BSP (xuzuoyi);

Tool

• Add Makefile generation feature in scons with command scons –target=makefile -s. Then developer can use make to build RT-Thread under Linux or Windows.
• Add Eclipse project generation feature in scons with command scons –target=eclipse -s, which will put the necessary information in .cproject and .project files in current BSP folder. The developer can use Eclipse to build RT-Thread.
• Fix the multi-group same name issue when generating Keil MDK project file and add a library file into the SConscript (Eric Qiang);
• Fix the GCC Version Comparing issue
• ENV version updated to v1.1.2
  • Update scons version to 3.0.5
  • Fix VC++ warning issue
  • Fix Unicode error issue

RT-Thread v4.0.1 released

V4.0.1 release is the bugfix version of RT-Thread v4.0.0, more for: adding netdev to better manage network devices, fix the signal issue under SMP environment, and change the POSIX thread management to array way. Moreover, several chip manufacturers (EastSoft, MindMotion, Winner Micro, NXP, Synopsys, etc.) contribute their BSP to RT-Thread upstream.

V4.0.1 release also represents the v4.0.x series more stable. Later, more multi-core processor BSP will be added, including AMP (Cortex-M4 + M0) and SMP (Dual-Cortex-A7 etc) processor.

Kernel

• Fix the rt_tick_from_millisecond() compilation warning issue;
• Remove unnecessary code that disable interrupt several times during startup initialization;
• Fix the issue that the system object is not detached when handling defunct threads.
• Add the value checking of semaphore (the maximum value of semaphore is up to 65535)
• Fix the 64-bit issue in kservice.c
• Add the checking and assertion of re-initialization of object.
• In the rt_enter_critical/rt_exit_critical function, add the checking of whether scheduler is startup or not.
• Fix the signal issue under SMP and the issue of signal information list in signal.
• Add 64-bit processor support in slab memory allocation.
• Fix the definition issue of ENOTSUP in libc_errno.h.
• Simplify the rtdbg.h file and use ulog to make log/debug system easier to use.
• Add the configuration of RT_USING_ARCH_DATA_TYPE, rt_int8_t/.../rt_uint32_t and other basic data types can be defined by BSP itself. (It is recommended to put them into the rtconfig_project.h file, so that this file can be automatically included in rtconfig.h when menuconfig generates it.)
• Add RT_Device_Class_Sensor type devices;
• In the case of single core, the definition of rt_hw_spin_lock/rt_hw_spin_unlock is redefined as the disable/enable interrupt.
• Add the rt_strnlen() function in kservice.c.
• Support the long long type in rt_kprintf (HubertXie);

Components

• Remove CMSIS and move to software package as CMSIS package.
• Remove logtrace component. The system log system switches to ulog;
• Add more code to support AC6 tool chain in some BSP and components;
• In DFS file system component, clean up the log and fix the mkfs issue when index may be out of range.
• Split the running mode from sleep mode in power management, and the frequency change should be clearer. Power management is not use idle hook but execute the sleep action in idle thread directly. (How to use power management, please visit programming document for details)
• Cleanup the log of MMC/SD driver framework;
• Rewrite Sensor Framework, replace the original C++ implementation with C version, and add some corresponding sensor software packages; To use the sensor packages, please use this release;
• Add the DMA transmission operation in the serial driver framework;
• Add the consistency protection to tc_flush routine of serial driver (loogg).
• Add rt_sfud_flash_find_by_dev_name API in SFUD.
• When the Pipe device closed, if it is an unnamed Pipe device and the open count is 0, this Pipe device will be deleted.
• The delayed work implementation is added to workqueue, and the workqueue of the system is added as an option.
• Fix the data loss issue when using DMA transmission in USB CDC.
• Change the return type of finsh_getchar to int;
• Fix the errno issue in newlib/GCC tool chain.
• Change the management of pthreads to POSIX thread array instead of mapping pthread_t directly to rt_thread_t; Change the fields definition more similar with newlib/glibc in pthreads.
• Fix the thread name output in ulog.
• Add loop parameter in utest, then executes test cases repeatedly; Add thread parameter in utest to execute testcase in a new thread.
• Add delay in handshake phase to protect incomplete data reception in YModem component.
• Add netdev component, abstract netdev concept, used to management and control network interface device, and provide netdev operation commands, including ping/ifconfig/dns/netstat etc;
• Modify SAL for netdev, that is, adds the judgment of netdev status and information when the socket creating and data transmitting;
• Add options and types for UDP multicast traffic handling and IPPROTO_IP in SAL;
• Fix itctrol() function not support to control socketfd issues in SAL;
• Improve error log processing in AT socket;
• Fix serial receive data failed issues when AT client initialization is not completed;

BSP

• Add ES32 chip BSP from Shanghai Eastsoft Microelectronics Co., Ltd. (EastSoft provides maintenance and support);

• Add GD32E230K-start, with ARM Cortex-M23 core BSP (xuzhuoyi)

• Add IMXRT1021-EVK BSP (NXP provides maintenance and support);

• Add the ETH hardware checksum option in IMXRT1052 ETH driver;

• Add more peripheral drivers, GPIO, LCD, SPI, camera, etc. in Kendryte K210 BSP.

• Cleanup the LPC 4088 BSP to use main function entry and support menuconfig;

• Add LPC1114 BSP with UART driver (SASANO Takayoshi, Japan);

• The double Frame Buffer mechanism and touch screen driver are added in Godson 1C BSP, then it can better to support Persimmon UI (sundm75).

• Add watchdog driver in Godson 1C BSP(sundm75);

• Add MM32 chip BSP from Shanghai MindMotion Microelectronics Co., Ltd. (MindMotion provides maintenance and support);

• Fix the SysTick interrupt handling issue in nRF52832 and add menuconfig configuration file.

• Add QSPI and SPI flash driver to Nuvoton M487 BSP (bluebear 233)

• Change the CPU porting to libcpu/arm/cortex-a folder in QEMU-VExpress A9/IMX6UL BSP;

• In QEMU-VExpress A9 BSP, the MAC address associated with the local MAC address is used for a unified MAC address in the network.

• remove stm32f0x, stm32f7-disco, stm32f107, stm32f40x, stm32l072, stm32l475-iot-disco, stm32l476-nucleo BSP (when the new STM32 BSP can completely replace these old BSP, these BSP will be removed);

• For the new STM32 BSP:

  • Add CAN driver (ylz0923)
  • Add CAN driver to stm32f103-fire-arbitrary (ylz0923)
  • stm32f746-st-disco with LCD, watchdog, SDCard, ethernet, Flash and other drivers (Jinsheng)

• More board support is added to the new STM32 BSP:

  • stm32f103-atk-warship V3 ATK Warship V3 (daizhiwang)
  • STm32f103-dofly-M3S Dofly STM32F103 Development Board
  • stm32f103-mini-system, the minimum system board for STM32F103 (daizhiwang)
  • stm32f401-st-nucleo
  • stm32f405-smdz-breadfruit sanmu electronic stm32405 development board (sunlichao)
  • stm32f469-st-disco
  • stm32h743-atk-apollo (whj4674672)
  • stm32l4r9-st-eval
  • stm32l053-st-nucleo (sun_shine)
  • stm32l475-st-discovery
  • stm32l476-st-nucleo (Vincent-VG)
  • stm32l496-ali-developer

• Add the ARC support for Synopsys Design Ware ARC EM Starter Kit (Synopsys provides maintenance and support);

• The SCI driver is added to the TMS320F28379D BSP (xuzuoyi).

• Add W60X Wi-Fi SoC chip BSP from Winner Microelectronics Co.,Ltd. (Winner Micro and RealThread provide maintenance and support);

• Fix the UART2 IO configuration issue in X1000 UART driver (Zhou Yanjie);

• Add SConscript file for each CPU porting.

• Cleanup the libcpu/arm/cortex-a code;

• The _rt_hw_context_switch_interrupt/_rt_hw_context_switch is separated in TI DSP TMS320F28379D BSP (xuzuoyi);

Tool

• Add Makefile generation feature in scons with command scons –target=makefile -s. Then developer can use make to build RT-Thread under Linux or Windows.
• Add Eclipse project generation feature in scons with command scons –target=eclipse -s, which will put the necessary information in .cproject and .project files in current BSP folder. The developer can use Eclipse to build RT-Thread.
• Fix the multi-group same name issue when generating Keil MDK project file and add a library file into the SConscript (Eric Qiang);
• Fix the GCC Version Comparing issue
• ENV version updated to v1.1.2
  • Update scons version to 3.0.5
  • Fix VC++ warning issue
  • Fix Unicode error issue

RT-Thread v3.1.2 released

RT-Thread v3.1.2 Released

The v3.1.x is the long term support branch in RT-Thread. It's more focused on bug fixed and BSP update.

The following is the change log since RT-Thread v3.1.1.

Kernel

• nothing

Components

• When formatting the file system, adds FM_SFD option to create a volume in SFD format for FatFs; (HubretXie)
• Add file system handle pointer in `struct dfs_fd' structure;
• Fix stdio fd issue when POSIX api is used; (gbcwbz)
• Fix the fd_is_open() issue: when the sub-path is the same in different mounted filesystem.
• Change the critical lock/unlock to dfs_lock/unlock in getcwd() function of DFS (the critical lock/unlock is different in SMP environment);
• Fix the aio_result issue, which is returned by aio_read_work in AIO; (fullhan)
• Fix the mmap issue when the addr parameter is NULL; (fullhan)
• Modify the _sys_istty function in armlibc to correctly handle STDIN/STDOUT/STDERR; (gbcwbz)
• Modify the _write_r function in newlib to correctly handle stdout.
• Fix the at_socket issue when socket is a null pointer; (thomas onegd)
• Fix the select event issue in at_recvfrom() function in at_socket;
• Divide SAL into sal_socket_ops/sal_proto_ops and sal_proto_ops is implemented with gethostbyname/getaddrinfo ops etc.
• Add socket TLS layer in SAL, that is, upper application can be supported by encrypted transmission without considering lowlevel TLS at all.
• Fix the length issue of ulog_strcpy, which should be not exceed ULOG_LINE_BUF_SIZE;
• Add the macro definition of hexadecimal log output to ulog; (HubretXie)
• Add uTest component. The uTest is a unit test framework on RT-Thread, and can also be used for automatic testing on board with external Python scripts.
• Fix some compilation warnings and enumeration mismatches in drivers/audio;
• Fix the can_rx/can_tx issue, which is not cleared to NULL when CAN device is closed in drivers/can; (xeonxu)
• Fix drivers/hwtimer, time acquisition issue with counting down mode;
• Add drivers/adc driver framework;
• Fix the tick compensation issue when enable interrupt too early; (geniusgogo)
• Add RT_SERIAL_USING_DMA option in drivers/serial;
• Add QSPI support in drivers/spi framework;
• Add QSPI support in SFUD (based on the QSPI peripheral of stm32); SFUD is upgraded to version 1.1.0;
• Optimize SPI take/release function call in spi_msd;
• Fix the blk_size issue in rt_rbb_blk_alloc();
• Fix the FS USB issue in _get_descriptor function;
• Fix the empty password issue in AP mode of drivers/wlan;
• Fix the return type issue in drivers/wlan;
• Remove the duplicate opening file check when open a file;

BSP

• Change the name parameter to cosnt char * in rt_hw_interrupt_install function; (liruncong)
• Fix $ warning issue in Kconfig files of each BSP;
• Add the LPC54114-lite BSP, including GPIO, I2C, SDCard, SPI, SPI Flash, UART driver;
• Add Nuvoton-M487 BSP, including UART, EMAC driver; (Bluebear 233)
• Fix the CAN driver issue in STM32F4XX-HAL BSP; (xeonxu)
• Fix UART DMA settings issue in STM32F10x/STM32F40x BSP; (zhouchuanfu)
• Fix the HEAP_BEGIN definition issue in STM32H743-Nucleo BSP; (nongxiaoming)
• Fix GPIO configuration issue in stm32f10x-HAL; (Wu Han)
• Change stm32f107 BSP as main function entry; (whj4674672)
• Fix the serial interrupt handling issue in stm32f10x BSP;
• Add PWM, RTC and watchdog drivers to stm32f10x-HAL BSP; (XXXXzzzz000)
• Fix the watchdog driver issue in stm32f4xx-HAL BSP; (XXXXzzzz000)
• Use lwIP version 2.x in stm32f40x/stm32f107 BSP.
• Fix the link issue when enable CmBacktrace package in stm32f4xx-HAL BSP; (xeonxu)
• Support Audio and microphones features in stm32f429-apollo BSP;
• Enable dlmodule support in x86 BSP; (SASANO Takayoshi)
• Add uTest section in the link script of qemu-vexpress-a9/stm32f429-atk-apollo BSP for automatic testing;
• Change the license to Apache License v2.0 in Godson 1C BSP; (sundm75)
• Add the new BSP framework for STM32 serial chip, such as STM32 G0/F0/L0/F1/F4/F7/H7. In new BSP framework, the SoC drivers is reused. And in same time, lots of STM32 boards are supported with new BSP framework:
  • STM32F091-Nucleo Development Board BSP
  • STM32F411-Nucleo Development Board BSP
  • STM32L432-Nucleo Development Board BSP; (sun_shine)
  • STM32F407-Discovery Development Board BSP
  • STM32F446-Nucleo Development Board BSP; (andeyqi)
  • STM32F746-Discovery Development Board BSP; (jinsheng)
  • STM32F767-Nucleo Development Board BSP; (e31207077)
  • STM32G071-Nucleo Development Board BSP;
  • ATK STM32F103 NANO Development Board BSP
  • ATK STM32F407 Explorer Development Board BSP
  • ATK STM32F429 Apollo Development Board BSP
  • ATK STM32F767 Apollo Development Board BSP
  • ATK STM32L475 Pandora IoT Development Board BSP
  • Fire STM32F103 Arbitrary Development Board BSP
  • Fire STM32F429 Challenger Development Board BSP
  • Fire STM32F767 Challenger Development Board BSP; (Hao Zhu)
  • ArmFly STM32F429-v6 Development Board BSP
  • STM32F103 iBox development board BSP; (dingo1688)
  • Dofly STM32F103 Development Board; (FindYGL)
  • STM32F107 uC/Eval Development Board BSP; (whj4674672)
  • and more, there are more developers involved for stm32 BSP framework, they are HubretXie, Hao Zhu, e190, etc. to improve the STM32 public driver.
• Add SWM320 BSP of Synwit.cn, including GPIO, HW Timer, I2C, Watchdog, PWM, RTC, SPI, UART, etc.; (provided and maintained by Synwit)
• Add TI TMS320F28379D BSP, the first DSP chip supported on RT-Thread; (xuzhuoyi)
• Fix USB driver issue in X1000; (Zhou YanJie)

Tool

• Provide more information when the tool chain does not exist;
• Add a draft Segger Embedded Studio project file generation command. Note that the tool chain in SES is a special version not the newlib.
• Fix the IAR library link command issue when use scons command line under;
• Fix the BSP path issue in scons str(Dir('#'));
• Add scons --pyconfig-silent command to add some Kconfig configurations and to generate .config and rtconfig.h files;
• Update the scons --dist command to adapt to the new BSP framework;
• Modify the mkromfs.py script. Fix the corresponding C code generation When the romfs contains empty files or empty folders;
• Fix the issue of version string comparison issue for GNU GCC version in utils.py;
• ENV updated to V1.1.0
  • Provide better prompt information to improve user experience;
  • Add system32 path to environment variables to avoid the cmd command cannot be found;
  • Add PYTHONHOME variable to environment variables to avoid PYTHON environment issue;

RT-Thread v4.0.0 released

RT-Thread v4.0.0 Released

The following is the change log of this version since v3.1.1 release.

Kernel

• Add SMP support;
• Add support for 64-bit processors;
• When the thread is running on CPU, the state of this thread is changed to RUNNING stat instead of READY state in previous version;

Components

• When formatting the file system, adds FM_SFD option to create a volume in SFD format for FatFs; (HubretXie)
• Add file system handle pointer in `struct dfs_fd' structure;
• Fix stdio fd issue when POSIX api is used; (gbcwbz)
• Fix the fd_is_open() issue: when the sub-path is the same in different mounted filesystem.
• Change the critical lock/unlock to dfs_lock/unlock in getcwd() function of DFS (the critical lock/unlock is different in SMP environment);
• Rewrite list_thread/list_* implementation of finsh cmd to avoid multi-core competition case;
• Fix the aio_result issue, which is returned by aio_read_work in AIO; (fullhan)
• Fix the mmap issue when the addr parameter is NULL; (fullhan)
• Modify the _sys_istty function in armlibc to correctly handle STDIN/STDOUT/STDERR; (gbcwbz)
• Modify the _write_r function in newlib to correctly handle stdout.
• Add lightweight processes (lwP) and corresponding system calls;
  • the lwP user application environment will be added later;
• Fix the at_socket issue when socket is a null pointer; (thomas onegd)
• Fix the select event issue in at_recvfrom() function in at_socket;
• Divide SAL into sal_socket_ops/sal_proto_ops and sal_proto_ops is implemented with gethostbyname/getaddrinfo ops etc.
• Add socket TLS layer in SAL, that is, upper application can be supported by encrypted transmission without considering lowlevel TLS at all.
• Fix the length issue of ulog_strcpy, which should be not exceed ULOG_LINE_BUF_SIZE;
• Add the macro definition of hexadecimal log output to ulog; (HubretXie)
• Add uTest component. The uTest is a unit test framework on RT-Thread, and can also be used for automatic testing on board with external Python scripts.
• Fix some compilation warnings and enumeration mismatches in drivers/audio;
• Fix the can_rx/can_tx issue, which is not cleared to NULL when CAN device is closed in drivers/can; (xeonxu)
• Fix drivers/hwtimer, time acquisition issue with counting down mode;
• Add drivers/adc driver framework;
• Fix the tick compensation issue when enable interrupt too early; (geniusgogo)
• Add RT_SERIAL_USING_DMA option in drivers/serial;
• Add QSPI support in drivers/spi framework;
• Add QSPI support in SFUD (based on the QSPI peripheral of stm32); SFUD is upgraded to version 1.1.0;
• Optimize SPI take/release function call in spi_msd;
• Fix the blk_size issue in rt_rbb_blk_alloc();
• Fix the FS USB issue in _get_descriptor function;
• Fix the empty password issue in AP mode of drivers/wlan;
• Fix the return type issue in drivers/wlan;
• Remove the duplicate opening file check when open a file;

BSP

• Change the name parameter to cosnt char * in rt_hw_interrupt_install function; (liruncong)
• Rewrite the RISC-V porting layer to make as a common and standalone porting layer for RISC-V IMAC 32/64;
• Fix $ warning issue in Kconfig files of each BSP;
• Add the LPC54114-lite BSP, including GPIO, I2C, SDCard, SPI, SPI Flash, UART driver;
• Add Nuvoton-M487 BSP, including UART, EMAC driver; (Bluebear 233)
• Add Kendryte K210 BSP with RISC-V64 dual-core SMP BSP, including UART driver, also verified with micropython;
• Add RV32M1 VEGA BSP, including GPIO, I2C, SDCard, UART and other drivers;
• Fix the CAN driver issue in STM32F4XX-HAL BSP; (xeonxu)
• Fix UART DMA settings issue in STM32F10x/STM32F40x BSP; (zhouchuanfu)
• Fix the HEAP_BEGIN definition issue in STM32H743-Nucleo BSP; (nongxiaoming)
• Fix GPIO configuration issue in stm32f10x-HAL; (Wu Han)
• Change stm32f107 BSP as main function entry; (whj4674672)
• Fix the serial interrupt handling issue in stm32f10x BSP;
• Add PWM, RTC and watchdog drivers to stm32f10x-HAL BSP; (XXXXzzzz000)
• Fix the watchdog driver issue in stm32f4xx-HAL BSP; (XXXXzzzz000)
• Use lwIP version 2.x in stm32f40x/stm32f107 BSP.
• Fix the link issue when enable cmBacktrace package in stm32f4xx-HAL BSP; (xeonxu)
• Support Audio and microphones features in stm32f429-apollo BSP;
• Enable dlmodule support in x86 BSP; (SASANO Takayoshi)
• Addd uTest section in the link script of qemu-vexpress-a9/stm32f429-atk-apollo BSP for automatic testing;
• Change the license to Apache License v2.0 in Godson 1C BSP; (sundm75)
• Add the new BSP framework for STM32 serial chip, such as STM32 G0/F0/L0/F1/F4/F7/H7. In new BSP framework, the SoC drivers is reused. And in same time, lots of STM32 boards are supportted with new BSP framework:
  • STM32F091-Nucleo Development Board BSP
  • STM32F411-Nucleo Development Board BSP
  • STM32L432-Nucleo Development Board BSP; (sun_shine)
  • STM32F407-Discovery Development Board BSP
  • STM32F446-Nucleo Development Board BSP; (andeyqi)
  • STM32F746-Discovery Development Board BSP; (jinsheng)
  • STM32F767-Nucleo Development Board BSP; (e31207077)
  • STM32G071-Nucleo Development Board BSP;
  • ATK STM32F103 NANO Development Board BSP
  • ATK STM32F407 Explorer Development Board BSP
  • ATK STM32F429 Apollo Development Board BSP
  • ATK STM32F767 Apollo Development Board BSP
  • ATK STM32L475 Pandora IoT Development Board BSP
  • Fire STM32F103 Arbitrary Development Board BSP
  • Fire STM32F429 Challenger Development Board BSP
  • Fire STM32F767 Challenger Development Board BSP; (Hao Zhu)
  • ArmFly STM32F429-v6 Development Board BSP
  • STM32F103 iBox development board BSP; (dingo1688)
  • Dofly STM32F103 Development Board; (FindYGL)
  • STM32F107 uC/Eval Development Board BSP; (whj4674672)
  • and more, there are more developers involved for stm32 BSP framework, they are HubretXie, Hao Zhu, e190, etc. to improve the STM32 public driver.
• Add SWM320 BSP of Synwit.cn, including GPIO, HW Timer, I2C, Watchdog, PWM, RTC, SPI, UART, etc.; (provided and maintained by Synwit)
• Add TI TMS320F28379D BSP, the first DSP chip supported on RT-Thread; (xuzhuoyi)
• Fix USB driver issue in X1000; (Zhou YanJie)
• Add BSP for Synopsys Design Ware ARC EM Starter Kit, bsp/synopsys/emsk_em9d, EM9D core, including GPIO, UART and other drivers; (provided and maintained by Synopsys)

Tool

• Provide more information when the tool chain does not exist;
• Add a draft Segger Embedded Studio project file generation command. Note that the tool chain in SES is a special version not the newlib.
• Fix the IAR library link command issue when use scons command line under;
• Fix the BSP path issue in scons str(Dir('#'));
• Add scons --pyconfig-silent command to add some Kconfig configurations and to generate .config and rtconfig.h files;
• Update the scons --dist command to adapt to the new BSP framework;
• Modify the mkromfs.py script. Fix the corresponding C code generation When the romfs contains empty files or empty folders;
• Fix the issue of version string comparison issue for GNU GCC version in utils.py;
• ENV updated to V1.1.0
  • Provide better prompt information to improve user experience;
  • Add system32 path to environment variables to avoid the cmd command cannot be found;
  • Add PYTHONHOME variable to environment variables to avoid PYTHON environment issue;

RT-Thread v3.1.1 released

RT-Thread v3.1.1 released

This version is the second version of the v3.1.x series, and v3.1.x is also a long-term maintenance version. Starting with v4.0.0, the kernel of RT-Thread will support symmetric multi-core processors, and welcome to pay attention to the updates on GitHub.

The biggest change of this version should be the license change of source codes. Starting with this version (and later versions), the license agreement for RT-Thread will use Apache License v2.0. The submitted code and PR to RT-Thread GitHub also needs to be declared with Apache License v2.0 and sign CLA.

Apache license change has not fully covered all the codes under BSP. At present, the BSP related to ST STM32, NXP LPC/i.MXRT/Kinetis have been modified completely.

Kernel

• Support the configuration of the upward growth stack which is defined by the ARCH_CPU_STACK_GROWS_UPWARD macro. Because there are fewer ARCH for stacks growing upward, this configuration item does not display directly in menuconfig. When a CPU ARCH needs stacks growing upward, the configuration of ARCH_CPU_STACK_GROWS_UPWARD can be selected by BSP Kconfig file in default.
• Support for ARMCC V6 and later compiler (LLVM-based Compiler); currently it's mainly used in Keil MDK IDE. Please notes that the "Warnings" needs to use Moderate Warnings in project configuration in C/C++ (AC6) TAB; After using ARMCC v6, RT-Thread will add an additional CLANG_ARM macro definition; (liruncong, nongxiaoming, bernard)
• The RT_USING_IDLE_HOOK configuration in Kconfig becomes a separate configuration item, not limited to RT_USING_HOOK; (geniusgogo)

Components

• Improve the PWM driver framework and add more interfaces.
• Fix the F_SETFL handling in ioctrl function; Fix the return value issue of fcntl function which is always 0 value.
• Fix the memheap object type issue when creating a ramfs object.
• Add power management framework for low power applications.
• Add multi-segment support for read and write operations in MC/SDIO driver framework (for stm32, you can choose a separate stm32_sdio package); (weety)
• Add ringblk_buf component for the block mode but in ringbuffer applications;
• Improve WLAN management framework with unified interfaces, management, commands, to provide more friendly support to developers and users;
• Add the conditional macro in the finsh when the MSH component is not enabled, even if the code files are compiled.
• Remove gdbstub and move to rt-thread packages.
• Upgrade and improve SAL and AT components: (linuxhan, eddylin83, slyant, luofanlu, Hubert Xie, Lawlieta, zhaojuntao, armink)
  • Fix the none cleared issue when closing socket in SAL, which lead to the socket is always holding.
  • Fix the issue that select() could not be used normally for UDP communication in AT component. Add the receiving data handling to complete the clearing of received event;
  • Add the errno value when receive data timeout in at_recvfrom function in the AT component.
  • Add the receive data timeout handling in at_client_recv function in the AT component.
• Fix a possible issue in fputc function implementation when using microlib;
• Add gmtime_r implementation for ARMCC, IAR tool chain;
• Improve time function support in IAR and support 64bit time; (hichard)
• DHCPD's support for IPv6;
• Remove lwIP-1.3.2 porting and add lwIP-2.1.0 porting; lwIP-2.0.2 is still the default version.
• Add a lightweight ulog component and automatically replace the debug macro of the original rtdbg.h when it's enable.
• USB stack update
  • HOST, optimize the USB HOST timeout mechanism; fix the un-alignment visit issue in F4xx-HAL USB host driver;
  • Device: Add the check when class drivers are illegally registered; Fix the un-aligned access issue in some platforms; optimize CDC VCOM classes, add the timeout mechanism and ID definition.

BSP

• Upgrade the wlan adapter to the new version of Wi-Fi management framework in amebaz BSP.
• Add airkiss wifi configuration code to amebaz BSP.
• Update Apollo2 BSP with ADC, GPIO, I2C, PDM, SPI, UART and other drivers; (Haleyl)
• BeagleBone BSP is changed to main function mode, and adds Kconfig configuration file.
• DM365 BSP adds Kconfig configuration file;
• Update HiFive1 BSP and add more documentation.
• Update imx6sx BSP to main function mode, and add Kconfig configuration file.
• Change the old imxrt1052-evk BSP. The imxrt1052-related BSPs are classified into the bsp/imxrt directory; A touch framework is added to bsp/imxrt, and later will be moved into components/drivers directory;
• Improve stm32f4xx-HAL BSP with PWM, I2C, USB Host driver; (XuanZe, xuzhuoyi)
• Improve stm32f10x BSP with CAN driver and increase I2C driver; (wuhanstudio, AubrCool)
• Improve stm32f10x-HAL BSP with I2C, IWG, PWM, RTC and other drivers, improve UART driver; (XuanZe)
• Improve stm32f429-disco BSP and add I2C, LCD, Touch driver; (xuzhuoyi)
• Improve x86 BSP, support dlmodule function; (SASANO Takayoshi, parai)

Tool

• Modify the building script to support Python 3; <Python 3 patches have been submitted to scons and need to wait for next scons release，maybe scons-3.0.2> (Arda)
• Add scons --pyconfig mode, which has a TK UI configurator; (weety)
• Support for GNU GCC 7/8 version toolchains (The -std=c99 is not added into C-compiler flags), but please note: PThreads component failed in 2.5 and new version of newlib.

RT-Thread v3.1.0 released

This version is the first release of the v3.1.0 branch. The main changes include kernel object type checking, device_ops interface, moving application modules from the kernel into components. Moreover, SAL, AT component, realtek rtl8710bn WiFi soc, Raspberry Pi 2B BSP etc was added. RT-Thread/ENV tool has also released a final version of v1.0.0; In this version, the building script is enhance for VSCode for compiling and debug.

From RT-Thread v3.0.4 to v3.1.0, there were about 470 commits, about 85,000 new lines of code and 190,000 lines of code removed.

The following is the change log since RT-Thread v3.0.4:

Kernel

• The main thread priority can be configured by Kconfig;
• Add the checking of kernel object type, which can effectively avoid the problem of continuing to use kernel objects after they are destroyed.
• Add the idle hook list to mount multiple idle hook, and can be configured by Kconfig.
• Add the device_ops operation set to reduce the footprint of device object.
• No special memory handle for application module when using SLAB memory management algorithm.
• Move application module from the kernel to libc/libdl.
• Enhance the debug information output of rtdbg.h file.
• In Keil/IAR tool chain, the RT_USED is used to keep symbols and avoid to add more argument or section in link phrase.

Components

• Remove all of external codes, which will be moved to packages in the future.
• Add initialization flag for shell, file system, network protocol stack etc to prevent repeated initialization;
• Enable the long file name feature of ELM FatFs in default.
• Change DFS FD to dynamic allocation mode. The maximum number of allocation is still DFS_FD_MAX.
• Add dfs_fdtable_get() function to get different fdtable;
• Add more DFS error messages, and provide easy to understand log when abnormal.
• Fix the problem of formatting FatFs file system when multiple FatFs file systems are mounted.
• Remove the folder enter feature in MSH when input a folder name;
• Add int finsh_set_prompt (const char * prompt); routine for set a custom prompt for msh;
• Add the Kconfig of VBUS.
• Move the application module from kernel to libc/libdl component;
• Rewrite most of the management code for application module: replace the original object container with the object list; split the symbol resolution code into different processor architecture.
• Update the application module chapter in the programming guide, and change it into dynamic module chapter.
• Overwrite the exit() function of newlib to take over the processing of exit for dlmodule.
• Add SAL (Socket Abstraction Layer) components for adapting different protocol stacks and network implementations, and update the relevant sections of the programming guide;
• Add AT components, including AT client, AT server and AT Socket function;
• Remove the poll/select API of DFS_NET and move them to SAL component.
• Remove the strong dependence of lwIP component of DFS_NET and replace it with Kconfig configuration of lwIP component support in SAL.
• Add the DHCP server function with lwIP raw API;
• Fix the wait queue none-initialization issue in socket allocation of lwIP.
• When a thread is about to block on a wait queue, fix the wake up issue for `rt_wqueue_wakeup' is executed to wake up that thread;
• Add the PWM driver framework;
• Fix the sdio_irq_wakeup release issue in the MMC/SD framework.
• Fix the problem of DMA handling in the serial driver framework.
• Update SFUD to v1.0.6 version;

BSP

• Fix the SP issue when hard fault occurs for ARM Cortex-M arch;
• Add C-Sky CK802 architecture porting;
• Add Realtek amebaz WiFi SOC (rtl8710bn) BSP;
• Update imxrt1052-evk firmware SDK to support B model chip.
• Fix the copying packets issue in the Godson 1C BSP when sending the NIC driver message.
• The new Tang m05x/m451 BSP are changed into the main() entry mode, and supports GCC compilation;
• Fix the inconsistency issue between touch range and LCD resolution in qemu-vexpress-a9.
• Add qemu-vexpress-gemini BSP for dual core A9 (RT-Thread + Linux) arch;
• Add the basic porting for Raspberry Pi 2B ;
• Add CAN and PWM drivers in stm32f4xx-HAL BSP;
• Optimize the GPIO driver in stm32f4xx-HAL BSP;
• Add UART3 driver in stm32f4xx-HAL BSP;
• Fix the I2C1 driver clock in stm32f10x BSP and WDG control interface.
• Add rt_hw_us_delay interface in stm32f10x-HAL BSP;
• Optimize the GPIO driver in stm32f10x-HAL BSP;
• Add GPIO driver and RTC driver in stm32f107 BSP;

Tool

• ENV update to v1.0.0 final version.
• ENV added the China mirror for software package, which can speed up the software package download, update etc.
• Fix the ENV known bugs and enhance the interaction with users.
• Add building script to detect the version of GCC & newlib;
• Add building script to detect the version of armcc;
• Add scons --dist function to make distribution for a BSP.
• Add `scons - dist - strip' function to make a minimal files of distribution for a BSP.
• Add `ASFLAGS/LOCAL_ASFLAGS' parameters for defined a group and pass parameters to assembler;
• Fix some errors in building script under the Linux environment.
• Add the C-Sky CDK IDE project generation.
• Add scons --target=vsc -s to generate friendly configuration files for VSCode;