Access to Materials

[aligbenewton7]

Please, find attached a list of the materials I couldn't find around.
Ambovent BOM (parts list)_check 3 sheets.xlsx

[salam17]

In stock but pricier at Amazon: https://www.amazon.com/Dorman-742-600-Window-Lift-Motor/dp/B000E35WEC/ref=sr_1_1?crid=E9W6ABV6G81B&dchild=1&keywords=dorman+742-600&qid=1588098679&s=automotive&sprefix=dorman+742-%2Cautomotive%2C147&sr=1-1

[aligbenewton7]

Greeting Team, Please, where do I find these materials? I can't get them in Nigeria. Part Quantity מספר יצרן Materials Measurements 0.5" HEX ID x 1.125" OD x 0313" 1 217-2734 VEXpro Arm Left 1 Polycarbonate : t=6 180x70x6 Arm Right 1 Polycarbonate : t=6 180x70x6 Arm Standoff 3 ABS Printed DIA12x15 Inner Adapter 1 Polycarbonate : t=6 / ABS Printed DIA40x6 Hex Shaft 1 AL5052-H32 / AL6061-T6 HEX12.7x27.94 Hex Spacer 1 AL5052-H32 / AL6061-T6 DIA19.05x9 Poly Upper Base 1 Polycarbonate : t=6 345x264.12x6 Poly Buttom Base 1 Polycarbonate : t=6 345x264.12x6 Profile Base 2 Any Aluminium 25x25x2; L=264.12 Profile Engine 1 Any Aluminium 40x40x3; t=2/3 Wall Right 1 Polycarbonate : t=6 136x81x6 Wall Left 1 Polycarbonate : t=6 136x81x6 Spacer 1 2 AL5052-H32 / AL6061-T6 DIA12x40 Spacer 2 1 AL5052-H32 / AL6061-T6 DIA15.88x7.21 Adapter 1 ABS printed 46.6x30x22.3 Adapter Small 1 ABS printed DIA21x18 Top Plate 1 Polycarbonate : t=6 200x188x6 Buttom Plate 1 Polycarbonate : t=6 200x188x6 Spacer 4 AL5052-H32 / AL6061-T6 DIA12x50 Arm Left REV.2 1 Polycarbonate : t=6 Wall Left REV.2 1 Polycarbonate : t=6 Wall Right REV.2 1 Polycarbonate : t=6 Spacer 1 ABS Printed DIA29x3.65 Casing

…

On Tue, Apr 28, 2020 at 7:33 PM salam17 ***@***.***> wrote: In stock but pricier at Amazon: https://www.amazon.com/Dorman-742-600-Window-Lift-Motor/dp/B000E35WEC/ref=sr_1_1?crid=E9W6ABV6G81B&dchild=1&keywords=dorman+742-600&qid=1588098679&s=automotive&sprefix=dorman+742-%2Cautomotive%2C147&sr=1-1 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#52 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOHVMBCNB2KZGJ3MEQXP7VLRO4OPBANCNFSM4MSENGHA> .

[Arie001]

This is Arie I am not part of the Ambovent Team here is my Quick Google search https://www.trilineng.com/about-us/ Triline Nigeria Limited can create the Items From stock Polycarbonate.

You will need to supply them the files the printed parts need a 3d printer.

https://www.finelib.com/business/printing-and-publishing/3d-printing-services
Tronic Lab seems your best Bet for most of the parts the may have Arduino nano and powersupply.

No need to use expensive printers for your prototype.

I think one can try a Automotive Window motor . I do not Know if anybody has made a DXF for the whole Items Laser cut.