readme.md

firmware snapshot

base example tune with pins selected: https://github.com/rusefi/fw-custom-mega100/blob/main/mega100_base_tune.msq

Younger sibling of https://github.com/rusefi/fw-custom-mega-legacy

See https://github.com/rusefi/rusefi/wiki/Custom-Firmware

FAQ

Q: What is this ?

A: This is an STM32F407VGT6 on an Arduino Mega socket board. It has 1 megabyte of flash, and can run both rusEFI and STM32Speeduino on existing installations that use Mega2560 board. There is a CAN PHY transciever on the board with CANTX/CANRX going to PD0/PD1, this is CAN0 ALT_2

Q: What voltage dividers are used for analog inputs ?

A: 470 ohm and 1k ohm

Q: What are the seven headers to solder?

A: the quick and lazy way: https://a.co/d/gqrhHuu,

A2: There are FIVE 1x8 , ONE 1x10, ONE 2x18 headers, they can be made up of normal cut to length 1x headers, and a 2x header with enough pins.

Q: Are all the pins connected ?

A: no, Mega D46 is not connected, on 0.4 board that's earmarked for WMI EMPTY indicator.

Q: What is the proper orientation of the header ?

A:

Q: What's the intended use for this board ?

A: Upgrading any speeduino compatible board: official 0.4 board:

wmtronics ua4c:

and others that are built around Mega2560 Socket

Q: What's the pinout, what goes where !?

For 0.4 board:

for ua4c: